CHAWLA K K. Composite Materials:Science and Engineering[M]. 3rd ed. New York:Springer, 2012.
[2]
YASAEE M, BOND I P, TRASK R S, et al. Damage control using discrete thermoplastic film inserts[J]. Composites Part A:Applied Science and Manufacturing, 2012, 43(6):978-989.
[3]
ALI M, JOSHI S C. Impact damage resistance of CFRP prepreg laminates with dispersed CSP particles into ply interfaces[J]. International Journal of Damage Mechanics, 2012, 21(8):1106-1127.
[4]
杜善义. 先进复合材料与航空航天[J]. 复合材料学报, 2007, 24(1):1-12. DU S Y. Advanced composite materials and aerospace engineering[J]. Acta Materiae Compositae Sinica, 2007, 24(1):1-12.
[5]
CANTWELL W J, MORTON J. The impact resistance of composite materials-a review[J]. Composites, 1991, 22(5):347-362.
[6]
SJOBLOM P O, HARTNESS J T, CORDELL T M. On low velocity impact testing of composite materials[J]. Journal of Composite Materials, 1988, 22(1):30-52.
[7]
SHIVAKUMAR K N, ELBER W, ILLG W. Prediction of low velocity impact damage in thin circular laminates[J]. AIAA Journal, 1985, 23(3):442-449.
[8]
OLSSON R. Mass criterion for wave controlled impact response of composite plates[J]. Composites Part A:Applied Science and Manufacturing, 2000, 31(8):879-887.
[9]
SCHONBERG W P. Hypervelocity impact response of spaced composite material structures[J]. International Journal of Impact Engineering, 1990, 10(1):509-523.
[10]
JOSHI S P, SUN C T. Impact-induced fracture initiation and detailed dynamic stress field in the vicinity of impact[A].Proceedings of American Society of Composites 2nd Technical Conference[C]. Newark:DE, 1987. 177-185.
[11]
ROBINSON P, DAVIES G. Impactor mass and specimen geometry effects in low velocity impact of laminated composites[J]. International Journal of Impact Engineering, 1992, 12(2):189-207.
[12]
DAVIES D, ROBINSON P.Predicting failure by debonding/delamination[A]. AGARD:74th Structures and Materials Meeting[C]. Greece:Patras, 1992. 25-29.
[13]
YAGHOUBI S A, LIAW B. Effect of lay-up orientation on ballistic impact behaviors of GLARE 5 FML beams[J]. International Journal of Impact Engineering, 2012, 54:138-148.
[14]
SEVKAT E. Experimental and numerical approaches for estimating ballistic limit velocities of woven composite beams[J]. International Journal of Impact Engineering, 2012, 45:16-27.
[15]
LIU D, MALVERN L E. Matrix cracking in impacted glass/epoxy plates[J]. Journal of Composite Materials, 1987, 21(7):594-609.
[16]
PEGORETTI A, CRISTELLI I, MIGLIARESI C. Experimental optimization of the impact energy absorption of epoxy-carbon laminates through controlled delamination[J]. Composites Science and Technology, 2008, 68(13):2653-2662.
[17]
SHYR T W, PAN Y H. Impact resistance and damage characteristics of composite laminates[J]. Composite Structures, 2003, 62(2):193-203.
[18]
益小苏. 先进复合材料技术研究与发展[M]. 北京:国防工业出版社, 2006. YI X S. Research and Development of Advanced Composites Technology[M]. Beijng:National Defense Industry Press, 2006.
[19]
DAVIES G, OLSSON R. Impact on composite structures[J]. The Aeronautical Journal, 2004, 108(1089):541-563.
[20]
RICHARDSON M O W, WISHEART M J. Review of low-velocity impact properties of composite materials[J]. Composites Part A:Applied Science and Manufacturing, 1996,27(12):1123-1131.
[21]
SALEHI-KHOJIN A, MAHINFALAH M, BASHIRZADEH R, et al. Temperature effects on Kevlar/hybrid and carbon fiber composite sandwiches under impact loading[J]. Composite Structures, 2007, 78(2):197-206.
[22]
CANTWELL W J, MORTON J. Geometrical effects in the low velocity impact response of CFRP[J]. Composite Structures, 1989, 12(1):39-59.
[23]
KOSTOPOULOS V, BALTOPOULOS A, KARAPAPPAS P, et al. Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes[J]. Composites Science and Technology, 2010, 70(4):553-563.
[24]
CARTIE D D R, IRVING P E. Effect of resin and fibre properties on impact and compression after impact performance of CFRP[J]. Composites Part A:Applied Science and Manufacturing, 2002, 33(4):483-493.
[25]
ABRATE S. Impact on Composite Structures[M]. London:Cambridge University Press, 1998.
[26]
王丹勇, 温卫东. 复合材料单向层合板损伤失效实验研究[J]. 复合材料学报, 2007, 24(5):142-148. WANG D Y, WEN W D. Experimental research on damage failure of unidirectional laminas[J]. Acta Materiae Compositae Sinica, 2007, 24(5):142-148.
[27]
GARNIER C, PASTOR M L, EYMA F, et al. The detection of aeronautical defects in situ on composite structures using non destructive testing[J]. Composite Structures, 2011, 93(5):1328-1336.
[28]
刘松平, 刘菲菲, 郭恩明, 等. 我国航空材料和结构先进无损检测技术之应用与发展[J]. 无损检测, 2013,35(7):64-69. LIU S P,LIU F F,GUO E M, et al. Advanced NDT&E techniques for aero-materials and structures in China[J]. Nondestructive Testing,2013,35(7):64-69.
[29]
HONG S, LIU D. On the relationship between impact energy and delamination area[J]. Experimental Mechanics, 1989, 29(2):115-120.
[30]
HULL D, SHI Y B. Damage mechanism characterization in composite damage tolerance investigations[J]. Composite Structures, 1993, 23(2):99-102.
[31]
DOREY G. Impact damage tolerance and assessment in advanced composite materials[A]. Seminar on Advanced Composites[C]. UK:Cranfield Institute of Technology, 1986.
[32]
DOREY G. Impact damage in composites-development, consequences, and prevention[A]. Proceedings of the 6th International Conference on Composite Materials and 2nd European Conference on Composite Materials[C]. London:Imperial College, 1988. 1-26.
[33]
DOREY G, SIGETY P, STELLBRINK K, et al. Impact damage tolerance of carbon fibre and hybrid laminates[A]. RAE Technical Report-87057[R].Farnborough, UK:Royal Aerospace Establishment, 1987.
[34]
CHOI H Y, DOWNS R J, CHANG F K. A new approach toward understanding damage mechanisms and mechanics of laminated composites due to low-velocity impact:part I experiments[J]. Journal of Composite Materials, 1991, 25(8):992-1011.
[35]
JOSHI S P, SUN C T. Impact induced fracture in a laminated composite[J]. Journal of Composite Materials, 1985, 19(1):51-66.
[36]
GARG A. Delamination-a damage mode in composite structures[J]. Engineering Fracture Mechanics, 1988, 29(5):557-584.
[37]
LIU S, CHANG F K. Matrix cracking effect on delamination growth in composite laminates induced by a spherical indenter[J]. Journal of Composite Materials, 1994, 28(10):940-977.
[38]
AMARO A M, REIS P N B, De MOURA M, et al. Influence of open holes on composites delamination induced by low velocity impact loads[J]. Composite Structures, 2013, 97:239-244.
[39]
SUN C T, MANOHARAN M G. Growth of delamination cracks due to bending in a[90°5/0°5/90°5] laminate[J]. Composites Science and Technology, 1989, 34(4):365-377.
[40]
HOJO M, KAGEYAMA K, TANAKA K. Prestandardization study on mode I interlaminar fracture toughness test for CFRP in Japan[J]. Composites, 1995, 26(4):243-255.
[41]
TAKAKA K, KAGEYAMA K, HOJO M. Prestandardization study on mode II interlaminar fracture toughness test for CFRP in Japan[J]. Composites, 1995, 26(4):257-267.
[42]
CHANG F K, CHOI H Y, JENG S T. Study on impact damage in laminated composites[J]. Mechanics of Materials, 1990, 10(1-2):83-95.
[43]
ABRATE S. Impact Engineering of Composite Structures[M]. Germany:Springer Vienna, 2011.
[44]
EL-HABAK A M. Effect of impact perforation load on GFRP composites[J]. Composites, 1993, 24(4):341-345.
[45]
AGRAWAL S, SINGH K K, SARKAR P K. Impact damage on fibre-reinforced polymer matrix composite-a review[J]. Journal of Composite Materials, 2014, 48(3):317-332.
[46]
MITREVSKI T, MARSHALL I H, THOMSON R, et al. The effect of impactor shape on the impact response of composite laminates[J]. Composite Structures, 2005, 67(2):139-148.
[47]
ABRATE S. Impact on laminated composite materials[J]. Applied Mechanics Reviews, 1991, 44(4):155-190.
[48]
GONZáLEZ E V, MAIMí P, CAMANHO P P, et al. Simulation of drop-weight impact and compression after impact tests on composite laminates[J]. Composite Structures, 2012, 94(11):3364-3378.
[49]
HITCHEN S A, KEMP R M J. The effect of stacking sequence on impact damage in a carbon fibre/epoxy composite[J]. Composites, 1995, 26(3):207-214.
[50]
KULKARNI M D, GOEL R, NAIK N K. Effect of back pressure on impact and compression-after-impact characteristics of composites[J]. Composite Structures, 2011, 93(2):944-951.
[51]
KONDO H, AOKI Y, HIRAOKA K. Residual indentation, delamination area and CAI strength of CFRP laminate under low-velocity impact[A].Sixteenth International Conference on Composite Materials[C]. Kyoto:the Japan Society for Composite Materials, 2007. 1-7.
[52]
WAKAYAMA S, KOBAYASHI S, IMAI T, et al. Evaluation of burst strength of FW-FRP composite pipes after impact using pitch-based low-modulus carbon fiber[J]. Composites Part A:Applied Science and Manufacturing, 2006, 37(11):2002-2010.
[53]
YANG F J, CANTWELL W J. Impact damage initiation in composite materials[J]. Composites Science and Technology, 2010, 70(2):336-342.
[54]
DATTA S, KRISHNA A V, RAO R. Low velocity impact damage tolerance studies on glass-epoxy laminates-effects of material, process and test parameters[J]. Journal of Reinforced Plastics and Composites, 2004, 23(3):327-345.
[55]
程小全, 吴学仁. 复合材料层合板低速冲击损伤容限的改进方法和影响因素[J]. 高分子材料科学与工程, 2002, 18(3):20-25. CHENG X Q, WU X R. Methods for improving damage tolerance of composite laminates after low velocity impact and their influence factors[J]. Polymer Materials Science & Engineering, 2001, 18(3):20-25.
[56]
BAUCOM J N, ZIKRY M A. Low-velocity impact damage progression in woven E-glass composite systems[J]. Composites Part A:Applied Science and Manufacturing, 2005, 36(5):658-664.
[57]
温卫东, 崔海坡, 徐颖.T300/BMP-316复合材料板冲击损伤研究[J]. 航空动力学报, 2007, 22(5):749-754. WEN W D, CUI H P, XU Y. Research on impact damage of T300/BMP-316 composite laminates[J]. Journal of Aerospace Power, 2007, 22(5):749-754.
[58]
VACHON P L, BRAILOVSKI V, TERRIAULT P. Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates[J]. Composite Structures, 2013,100:424-435.
[59]
桂良进, 程小全, 寇长河, 等. 缝纫对复合材料层合板强度和抗冲击性能的影响[J]. 航空学报, 2000, 21(4):368-371. GUI L J, CHENG X Q, KOU C H, et al. Effect of stitching on strength and impact damage resistance of composites laminates[J]. Acta Aeronautica et Astronautica Sinica, 2000, 21(4):368-371.
[60]
ADANUR S, TSAO Y P, TAM C W. Improving fracture resistance of laminar textile composites by third direction reinforcement[J]. Composites Engineering, 1995, 5(9):1149-1158.
[61]
AYMERICH F, PRIOLO P. Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading[J]. International Journal of Impact Engineering, 2008, 35(7):591-608.
[62]
益小苏.先进树脂基复合材料高性能化理论与实践[M]. 北京:国防工业出版社, 2011. YI X S. Theory and Application of High-performance Polymer Matrix Composites[M]. Beijng:National Defense Industry Press, 2011.
[63]
BYRES B A. Behaviour of damaged graphite/epoxy laminates under compression loading[a]. NASA CR-159293[r]. Washington D C:National Aeronautics and Space Administration, 1980.
[64]
TAN K T, WATANABE N, IWAHORI Y. Effect of stitch density and stitch thread thickness on low-velocity impact damage of stitched composites[J]. Composites Part A:Applied Science and Manufacturing, 2010, 41(12):1857-1868.
[65]
HULL D. An Introduction to Composite Materials[M]. Cambridge:Cambridge University Press, 1981.
[66]
KANG T J, KIM C. Energy-absorption mechanisms in Kevlar multiaxial warp-knit fabric composites under impact loading[J]. Composites Science and Technology, 2000, 60(3):773-784.
[67]
CANTWELL W J, MORTON J. The significance of damage and defects and their detection in composite materials:a review[J]. Composites, 1991, 27(1):29-42.
[68]
ORNAGHI H L, BOLNER A S, FIORIO R, et al. Mechanical and dynamic mechanical analysis of hybrid composites molded by resin transfer molding[J]. Journal of Applied Polymer Science, 2010, 118(2):887-896.
[69]
HAZARIKA S B, CHOUDHURY S U, PANJA S S, et al. Fabrication and performance of hybrid betel nut and jute fiber reinforced epoxy composite[J]. Journal of Polymer Materials, 2013, 30(2):213-224.
[70]
SARASINI F, TIRILL J, VALENTE M, et al. Hybrid composites based on aramid and basalt woven fabrics:impact damage modes and residual flexural properties[J]. Materials & Design, 2013, 49:290-302.
[71]
HOSUR M V, ADBULLAH M, JEELANI S. Studies on the low-velocity impact response of woven hybrid composites[J]. Composite Structures, 2005, 67(3):253-262.
[72]
熊杰, 萧庆亮. 铺层混杂对复合材料层压板侵彻性能的影响[J]. 材料科学与工程学报, 2003, 21(2):178-182. XIONG J, XIAO Q L. Influence of ply stacking hybrid on penetration properties of composite laminates[J]. Journal of Materials Science and Engineering, 2003, 21(2):178-182.
[73]
GUSTIN J, JONESON A, MAHINFALAH M. Low velocity impact of combination Kevlar/carbon sandwich composites[J].Composite Structures, 2005, 69(4):396-406.
[74]
张明, 安学锋, 刘立朋, 等. 航空级复合材料层板的定域相变控制与增韧研究进展[J]. 中国材料进展, 2009, 28(6):13-18. ZHANG M, AN X F, LIU L P, et al. Research and development of phase control and toughening at the interphase of aeronautical polymer matrix composites[J]. Materials China, 2009, 28(6):13-18.
[75]
JORDAN W M, BRADLEY W L, MOULTON R J. Relating resin mechanical properties to composite delamination fracture toughness[J]. Journal of Composite Materials, 1987, 23(9):923-943.
[76]
SELA N, ISHAI O. Interlaminar fracture toughness and toughening of laminated composite materials:a review[J]. Composites, 1989, 20(5):423-435.
[77]
GOTTESMAN T, GIRSHOVICH S, DRUKKER E, et al. Residual strength of impacted composites:analysis and tests[J]. Journal of Composites Technology & Research, 1994, 16(3):244-255.
[78]
LVAREZ V, BERNAL C R, FRONTINI P M, et al. The influence of matrix chemical structure on the mode I and II interlaminar fracture toughness of glass-fiber/epoxy composites[J]. Polymer Composites, 2003, 24(1):140-148.
[79]
DRAKONAKIS V M, VELISARIS C N, SEFERIS J C, et al. Matrix hybridization in the interlayer for carbon fiber reinforced composites[J]. Polymer Composites, 2010, 31(11):1965-1976.
[80]
CHOU I, INUTAKE T, NAMBA K. Correlation of damage resistance under low velocity impact and Mode II delamination resistance in CFRP laminates[J]. Advanced Composite Materials, 1999, 8(2):167-176.
[81]
杨玲. 碳纤维/环氧复合材料界面优化研究进展[J]. 高科技纤维与应用, 2013, 38(3):39-45. YANG L. Research progress of carbon fiber/epoxy composite interface optimization[J]. Hi-Tech Fiber & Application, 2013, 38(3):39-45.
[82]
PARK S J, SEO M K, LEE J R. Roles of interfaces between carbon fibers and epoxy matrix on interlaminar fracture toughness of composites[J]. Composite Interfaces, 2006, 13(2-3):249-267.
[83]
BADER M G, BAILEY J E, BELL I. The effect of fibre-matrix interface strength on the impact and fracture properties of carbon-fibre-reinforced epoxy resin composites[J]. Journal of Physics D:Applied Physics, 1973, 6(5):572-586.
[84]
侯满义, 李曙林. 应力条件下的飞机结构撞击损伤问题研究[J]. 航空科学技术, 2006,(1):35-37. HOU M Y, LI S L. Study on impact damage issue of aircraft structure under stress[J]. Aeronautical Science and Technology, 2006,(1):35-37.
[85]
WHITTINGHAM B, MARSHALL I H, MITREVSKI T, et al. The response of composite structures with pre-stress subject to low velocity impact damage[J]. Composite Structures, 2004, 66(1):685-698.
[86]
KURSUN A, SENEL M. Investigation of the effect of low-velocity impact on composite plates with preloading[J]. Experimental Techniques, 2013, 37(6):41-48.
[87]
程小全, 寇长河, 郦正能. 缝合复合材料可用性——环境条件下层压板的冲击后压缩性能[J]. 材料工程, 2004, (9):38-41. CHENG X Q, KOU C H, LI Z N. Properties of stitched composite laminates post-impact compression of laminates under different environment[J]. Journal of Materials Engineering, 2004, (9):38-41.
[88]
潘文革, 矫桂琼, 熊 伟, 等. 二维编织层压板湿热环境下冲击后压缩性能的实验研究[J]. 航空材料学报, 2005, 25(4):40-44. PAN W G, JIAO G Q, XIONG W, et al. Experimental studies of CAI of woven-fiber laminates composite on hygrothermal environment[J]. Journal of Aeronautical Materials, 2005, 25(4):40-44.
[89]
IBEKWE S I, MENSAH P F, LI G, et al. Impact and post impact response of laminated beams at low temperatures[J]. Composite Structures, 2007, 79(1):12-17.