REIS L, LI B, DE FREITAS M. A multiaxial fatigue approach to rolling contact fatigue in railways[J]. International Journal of Fatigue,2014,67:191-202.
[2]
XU J S, ZHANG X C, XUAN F Z, et al. Rolling contact fatigue behavior of laser cladded WC/Ni composite coating[J]. Surface & Coatings Technology,2014,239:7-15.
[3]
ZENG D F, LU L T, LI Z Y, et al. Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel[J]. Materials and Design,2014,54:137-143.
[4]
KOMATA H, YAMABE J, MATSUNAGA H, et al. Effect of size and depth of small defect on the rolling contact fatigue strength of bearing steel JIS-SUJ2[J]. Transactions of the Japan Society of Mechanical Engineer Series A,2013,79(803):961-975.
[5]
HASHIMOTO K, FUJIMATSU T, TSUNEKAGE N, et al. Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions[J]. Materials and Design,2011,32(3):1605-1611.
[6]
WANG L, FANG J C, ZHAO Z Y, et al. Application of backward propagation network for forecasting hardness and porosity of coatings by plasma spraying[J]. Surface & Coatings Technology,2007,201(9-11):5085-5089.
[7]
ZHANG X C, XU B S, XUAN F Z, et al. Rolling contact fatigue behavior of plasma-sprayed CrC-NiCr cermet coatings[J]. Wear,2008,265(11-12):1875-1883.
[8]
YU H L, ZHANG W, WANG H M. Bonding and sliding wear behaviors of the plasma sprayed NiCrBSi coatings[J].Tribology International,2013,66:105-113.
[9]
AN Y L, HOU G L, CHEN J, et al. Microstructure and tribological properties of iron-based metallic glass coatings prepared by atmospheric plasma spraying[J]. Vacuum,2014,107:132-140.
[10]
PIAO Z Y, XU B S, WANG H D, et al. Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating[J]. Applied Surface Science,2013,266:420-425.
[11]
SERRES N, HLAWKA F, COSTIL S, et al. Microstructures and environmental assessment of metallic NiCrBSi coatings manufactured via hybrid plasma spray process[J]. Surface & Coatings Technology,2010,205(4):1039-1046.
[12]
NIRANATLUMPONG P, KOIPRASERT H. Phase transformation of NiCrBSi-WC and NiBSi-WC arc sprayed coatings[J]. Surface & Coatings Technology,2011,206:440-445.
[13]
LIYANAGE T, FISHER G, GERLICH A P. Influence of alloy chemistry on microstructure and properties in NiCrBSi overlay coatings deposited by plasma transferred arc welding(PTAW)[J]. Surface & Coatings Technology,2010,205(3):759-765.
[14]
王韶云, 李国禄, 王海斗, 等. 超音速等离子NiCr/Cr3C2涂层的接触疲劳寿命[J]. 材料热处理学报,2012,(5):112-115. WANG Shao-yun, LI Guo-lu, WANG Hai-dou, et al. Contact fatigue life of supersonic plasma sprayed NiCr/Cr3C2 coatings[J]. Transactions of Materials and Heat Treatment,2012,(5):112-115.
[15]
王韶云, 李国禄, 王海斗, 等. 微缺陷对热喷涂涂层接触疲劳性能的影响[J]. 材料工程,2012,(2):72-76. WANG Shao-yun, LI Guo-lu, WANG Hai-dou, et al. Influence of microdefect on rolling contact fatigue performance of thermal spraying coating[J]. Journal of Materials Engineering,2012,(2):72-76.
[16]
朴钟宇, 徐滨士, 王海斗, 等. 等离子喷涂铁基涂层的接触疲劳失效机理研究[J]. 材料工程,2009,(11):69-73. PIAO Zhong-yu, XU Bin-shi, WANG Hai-dou, et al. Investigation of contact fatigue mechanism of plasma spraying Fe-based coating[J]. Journal of Materials Engineering,2009,(11):69-73.
[17]
薛毅, 陈立萍. 统计建模与R软件[M]. 北京:清华大学出版社,2007. XUE Yi, CHEN Li-ping. Statistical Modeling and R Software[M]. Beijing:Tsinghua University Press,2007.
