YEH J W, CHEN S K, GAN J Y, et al. Formation of simple crystal structures in Cu-Co-Ni-Cr-Al-Fe-Ti-V alloys with multiprincipal metallic elements[J]. Metall Mater Trans,2004,35(8):2533-2536.
[2]
CANTOR B, CHANG I T H, KNIGHT P, et al. Microstructural development in equiatomic multicomponent alloys[J]. Mater Sci Eng,2003,375:213-218.
[3]
YEH J W, CHEN S K, LIN S J, et al. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes[J]. Adv Eng Mater,2004,6(5):299-303.
[4]
ZHOU Y J, ZHANG Y, WANG Y L,et al. Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties[J]. Appl Phys Lett,2007,90(18):181904-1-181904-3.
[5]
CHOU H P, CHANG Y S, CHEN S K, et al, Microstructure, thermophysical and electrical properties in AlxCoCrFeNi (0≤x≤2) high-entropy alloys[J]. Mater Sci Eng,2009,163(3):184-189.
[6]
GALI A, GEORGE E P. Tensile properties of high- and medium-entropy alloys[J]. Intermetallics,2013,39:74-78.
[7]
TANG Z, HUANG L, HE W, et al. Alloying and processing effects on the aqueous corrosion behavior of high-entropy alloys[J]. Entropy,2014,16:895-911.
[8]
WANG Y F, MA S G, CHEN X H, et al. Optimizing mechanical properties of AlCoCrFeNiTix high-entropy alloys by tailoring microstructures[J]. Acta Metall Sincia,2013,26(3):277-284.
[9]
OTTO F, DLOUHY A, SOMSEN C, et al. The influences of temperature and microstructure on the tensile properties of a CoCr-FeMnNi high-entropy alloy[J]. Acta Mater,2013,61(15):5743-5755.
[10]
KRENCKEL P, SARING P, FALKENBERG M A, et al. Interaction of iron with extended defects in multicrystalline silicon studied by local gettering[J]. Energy Procedia,2013,38:582-588.
[11]
TILLMANN W, FENG X Q, FISCHER G, et al. Preliminary study for flaw detection in nodular cast iron by cyclic loading and thermography[J]. NDT & E Int,2013,56:28-37.
[12]
SINGH S,WANDERK N,MURTY B S, et al. Decomposition in multi-component AlCoCrCuFeNi high-entropy alloy[J]. Acta Mater,2011,59(1):182-190.
[13]
TSAI K Y, TSA M H, YEH J W. Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys[J]. Acta Mater,2013,61(13):4887-4897.
[14]
ZHAO H L, QIU F, JIN S B, et al. Compression properties and work-hardening effect of the NiAl-matrix composite with TaB2 and TaB[J]. Intermetallics,2012,27:1-5.
[15]
HALLBERG H. Influence of process on grain refinement in AA1050 aluminum[J]. Int J Mech Sci,2013,66:260-272.
[16]
贾晨, 翟秋亚, 吕海峰, 等. 高塑性高熵合金的设计与制备[J].铸造技术,2010,31(9):1170-1172. JIA C, ZHAI Q Y, LV H F, et al. Design and preparation of higher ductile and high entropy alloy[J]. Foundry,2010,31(9):1170-1172.
[17]
王水华.多种工艺对CoCrFeNiCu高熵合金显微组织和力学性能的影响[D].北京:北京科技大学,2011. WANG S H. Effects of processing on the microstructural and mechanical properties of CoCrFeNiCu high entropy alloys[D].Beijing:Beijing University of Science and Technology,2011.
[18]
左演声,陈文哲,梁伟.材料现代分析方法[M].北京:北京工业大学出版社,2000.68-70. ZUO Y S, CHEN W Z, LIANG W. Modern Materials Analysis Methods[M].Beijing:Beijing University of Technology Press, 2000.68-70.
[19]
HU Y, STENDER D, MEDARDE M, et al. Lattice distortion and strain relaxation in epitaxial thin films of multiferroic Tb-MnO3 probed by X-ray diffractometry and micro-Raman spectroscopy[J]. Appl Surf Sci,2013,278:92-95.
[20]
MISHRA A, KAD B K, GREGORI F. Microstructural evolution in copper subjected to severe plastic deformation: experiments and analysis[J]. Acta Mater,2007,55(1):13-28.
[21]
CHEN M R, LIN S J, YEH J W, et al. Microstructure and properties of Al0.5CoCrCuFeNiTix (x=0-2.0) high-entropy alloys[J]. Mater Trans,2006,47(5):1395-1401.
[22]
SHENG H F, GONG M, PENG L M. Microstructural characterization and mechanical properties of an Al0.5CoCrFeNi high-entropy alloy in as-cast and heat-treated/quenched conditions[J]. Mater Sci Eng,2013,567:14-20.
[23]
STRAUMAL B B, MAZILKIN A A, BARETZKY B, et al. Accelerated diffusion and phase transformations in Co-Cu alloys driven by the severe plastic deformation[J]. Mater Trans,2012,53(1):63-71.
[24]
徐恒钧. 材料科学基础[M].北京:北京工业大学出版社,2001.384-385. XU H J. Foundation of Material Science[M].Beijing:Beijing University of Technology Press,2001.384-385.
[25]
GUO J H, ZHAO S D, MURAKAMI R I , et al. Experimental and numerical investigation for ductile fracture of Al-alloy 5052 using modified Rousselier model[J]. Comput Mater Sci,2013,71:115-123.
