|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
平纹编织碳纤维增韧碳化硅复合材料的力学性能及损伤演化
Abstract:
通过平纹编织碳纤维增韧碳化硅复合材料的拉伸、压缩和剪切的单向与循环加–卸载实验,分别研究了材料在拉伸载荷、压缩载荷和剪切载荷作用下的力学性能和损伤演化过程。结果表明在压缩载荷作用下,材料的压缩性能下降很小,基体开裂,纤维界面脱粘和纤维束断裂为主要的失效机理;材料在拉伸和剪切载荷作用下,损伤演化过程有所区别。材料拉伸损伤演化经历损伤初始阶段、损伤加速阶段和损伤减缓阶段,为韧性断裂,损伤破坏主要表现为基体开裂、横向纤维束开裂,界面层脱粘、层间剥离和纤维断裂;在剪切载荷作用下,经历损伤加速阶段和损伤减缓阶段,基体开裂、界面层脱粘和纤维断裂为主要的损伤机理,试样最后在最窄截面位置形成平断面。基于实验研究结果,采用回归分析方法,分别给出了材料在拉伸载荷和剪切载荷作用下损伤演化方程式。
| [1] | 张立同,成来飞,徐永东.新型碳化硅陶瓷基复合材料的研究进展[J].航空制造技术,2003(1):24–32.ZHANG Litong,CHENG Laifei,XU Yongdong.Aeronaut Manufact Technol(in Chinese),2003(1):24–32. [2]张立同,成来飞.连续纤维增韧陶瓷基复合材料可持续发展战略探讨[J].复合材料学报,2007,24(2):1–6.ZHANG Litong,CHENG Laifei.Acta Mater Compos Sin(in Chinese),2007,24(2):0001–0006. [3]MARSHALL D B,OLIVER W C.Measurement of interfacial me-chanical properties in fiber-reinforced ceramic composites[J].J Am Ceram Soc1987,70:542–548. [4]JACOBSEN T K,BRONDSTED P.Mechanical properties of two plain-woven chemical vapor infiltrated silicon carbide-matrix composites[J].J Am Ceram Soc,2001,84(5):1043–1051. [5]SHULER S F,HOLMES J W,WU X.Influence of loading frequency on the room temperature fatigue of carbon fibre/SiC matrix composite[J].J Am Ceram Soc,1994,77:792. [6]CHABOCHE J L,MAIRE J F.New progress in micromechanics-based CDM models and their application to CMCs[J].Compos Sci Technol,2001,61:2239–2246. [7]管国阳,娇桂琼,张增光,等.平纹编织C/SiC复合材料的失效判据[J].硅酸盐学报,2005,33(9):1100–1104.GUAN Guoyang,JIAO Guiqiong,ZHANG zengguang,et al.J Chin Ceram Soc(in Chinese),2005,33(9):1100–1104. [8]ASTM C1275–95.Standard test method for monotonic tensile strength testing of continuous fiber-reinforced advanced ceramics with solid rectangular cross sections an ambient temperatures[S]. [9]ASTM C1258–97.Standard test method for monotonic compressive strength testing of continuous fiber reinforced advanced ceramics with solid rectangular cross sections at ambient temperatures[S]. [10]ASTM C1292–95.Standard test method for in-plane(iosipescu)shear strength of continuous fiber-reinforced advanced ceramics at ambient temperatures[S]. [11]梅辉,成来飞,张立同,等.2维C/SiC复合材料的拉伸损伤演变过程和微观结构特征[J].硅酸盐学报,2007,35(2):137–143.MEI Hui,CHENG Laifei,ZHANG Litong,et al.J Chin Ceram Soc(in Chinese),2007,35(2):137–143. [12]常岩军,矫桂琼,陶永强,等.2.5D-C/SiC复合材料拉伸损伤研究[J].无机材料学报,2008,23(3):509–514.CHANG Yanjun,JIAO Guiqiong,TAO Yongqiang,et al.J Inorg Mater(in Chinese),2008,23(3):509–514. [13]常岩军,矫桂琼,王波,等.三维机织陶瓷基复合材料的面内剪切性能及损伤研究[J].无机材料学报,2007,22(3):113–118.CHANG Yanjun,JIAO Guiqiong,WANG Bo,et al.J Inorg Mater(in Chinese),2007,22(3):113–118. [14]张彦,朱平,来新民,等.低速冲击作用下碳纤维复合材料铺层板的损伤分析[J].复合材料学报,2006,23(2):150–157.ZHANG Yan,ZHU Ping,LAI Xinmin,et al.Mater Compos Sin(in Chinese),2006,23(2):150–157.
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
