全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

热压烧结制备原位复合(TiB2+TiC)/Ti3SiC2复相陶瓷

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用热压烧结法制备了原位复合(TiB2+TiC)/Ti3SiC2复相陶瓷。采用X射线衍射、扫描电镜和透射电镜对材料的物相组成和显微结构进行了表征,研究了烧结温度对材料物相组成、烧结性能、显微结构与力学性能的影响。结果表明烧结温度在1350~1500℃范围内,随着烧结温度的升高,合成反应进行逐渐完全,材料的密度、抗弯强度和断裂韧性显著提高。1500℃烧结可得到致密的原位复合(TiB2+TiC)/Ti3SiC2复相陶瓷,材料晶粒发育较完善,层片状Ti3SiC2、柱状TiB2与等轴状TiC晶粒清晰可见,增强相晶粒细小,晶界干净,材料的抗弯强度、断裂韧性和Vickers硬度分别达到741MPa,10.12MPa·m1/2和9.65GPa。烧结温度达到1550℃时Ti3SiC2开始发生分解,材料的密度和力学性能又显著下降。

References

[1]  BARSOUM M W. The Mn+1AXn phases: a new class of solids; thermodynamically stable nanolaminates [J]. Prog Solid State Chem, 2000, 28(1-4): 201-281. [2] YOO H I, BARSOUM M W, El-RAGHY T. Ti3SiC2 has negligible thermopower [J]. Nature,2000, 407: 581-582. [3] HU C F, ZHOU Y C, BAO Y W, et al. Tribological properties of polycrystalline Ti3SiC2 and Al2O3-reinforced Ti3SiC2 composites [J]. J Am Ceram Soc, 2006, 89(11): 3456-3461. [4] KONOPLYUK S, ABE T, UCHIMOTO T, et al. Synthesis of Ti3SiC2/TiC composites from TiH2/SiC/TiC powders [J]. Mater Lett, 2005, 59(18): 2342-2346. [5] ZHANG J F, WANG L J, JIANG W, et al. Rapid fabrication of Ti3SiC2-SiC nanocomposite using the spark plasma sintering-reactive synthesis (SPS-RS) method [J]. Script Mater, 2007, 56(3): 241-244. [6] BENKO E, KLIMCZYK P, MACKIEWICZ S, et al. cBN-Ti3SiC2 composites [J]. Diam Relat Mater, 2004, 13(3): 521-525. [7] ZHOU W B, MEI B C, ZHU J Q. Synthesis of Ti3SiC2/TiB2 composite by in-situ hot pressing (HP) method [J]. J Wuhan Univ Technol, Mater Sci Ed, 2008, 23(6): 863-865. [8] SHI S L, PAN W. Toughening of Ti3SiC2 with 3Y-TZP addition by spark plasma sintering [J]. Mater Sci Eng A: Struc Mater Prop Micro Proc, 2007, 447(1-2): 303-306. [9] CHEN J X, LI J L, ZHOU Y C. In-situ synthesis of Ti3AlC2/TiC-Al2O3 composite from TiO2-Al-C system [J]. J Mater Sci Tech, 2006, 22(4): 455-458. [10] ZAN Q F, DONG L M, WANG C, et al. Improvement of mechanical properties of Al2O3/Ti3SiC2 multilayer ceramics by adding SiC whiskers into Al2O3 layers [J]. Ceram Int, 2007, 33(3): 385-388. [11] 张国军, 金宗哲. 原位合成复相陶瓷概述[J]. 材料导报, 1996, 10(2): 62-65. ZHANG Guojun, JIN Zongzhe. Mater Rev (in Chinese), 1996, 10(2): 62-65. [12] SONG L Y, ZHENG M S, HASHIMOTO H. Synthesis of single-phase Ti3SiC2 powder [J]. J Eur Ceram Soc, 2003, 23(16): 3147-3152. [13] RADHAKRISHNAN R, WILLIAMS J J, AKINC M. Synthesis and high-temperature stability of Ti3SiC2 [J]. J Alloys Compd, 1999, 285(1-2): 85-88. [14] RACAULT C, LANGLAIS F, NASLAIN R. Solid-state synthesis and characterization of the ternary phase Ti3SiC2 [J]. J Mater Sci, 1994, 29(13): 3384-3392.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133