？ BOGIEEVIC A, DWIGHT R. Jennison. veriations in the naltrue of metal adsorption on ultrathin A12O3 film [J]. Phys Rev Lett, 1999, 82(20): 4050–4053.
[2]
？ ZHANG W, SMITH J R, EVANS A G. The connection between ab initio caleulations and interface adhesion measurements on metal/oxide systems: Ni/Al2O3 and Cu/A12O3 [J]. Acta Mater, 2002, 50(15): 3803– 816.
[3]
？ YU Zhiqiang, WU Gaohui, SUN Dongli, et al. Coating of Y2O3 additiveon Al2O3 powder and its effect on the wetting behaviour in the system Al2O3p/Al [J]. Mater Lett, 2003, 57: 3111–3116.
[4]
？ YU Zhiqiang, WU Gaohui, JIANG Longtao, et al. Effect of coating Al2O3 rein- forcing particles on the interface and mechanical properties of 6061alloy aluminium matrix composites [J]. Mater Lett, 2005, 59: 2281–2284 .
[5]
？ 景茂祥. 氧化铝/镍复合材料制备新工艺及结构和性能研究[D]. 江苏大学, 2007.
[6]
JING Maoxiang. Novel PreParation Processes and Structure-Property for Alumina/Niekel Composites (in Chinese, dissertation). Jiangsu University, 2007
[7]
？ YANG B, WANG F, ZHANG J S. Microstrural characterization of in stiuTiC/Al and TiC/Al–20Si–5Fe–3Cu–1Mg composites prepared by spray deposition [J]. Acta Mater, 2003, 51: 4977–4989.
[8]
？ REDDY B S B, RAJASEKHAR K, VENU M, et al. Mechanical activation-assisted solid-state combustion synthesis of insitu aluminum matrix hybrid (Al3Ni/Al2O3) nanocomposites [J]. J Alloys Compd, 2008, 465: 97–105.
[9]
？ HEMANTH J. Quartz (SiO2p) reinforced chilled metal matrix composite (CMMC) for automotive applications [J]. Mater Design, 2009, 30: 323–329.
[10]
？ RADO C, KALOGEROPOULOU S, EUSTATHOPOULOS N. Wetting and bonding of Ni-Si alloys on silico carbide [J]. Acta Metallurgica, 1999, 47(2): 461–473.
[11]
？ BAHRAINI M, MINGHETTI T, ZOELLIG M, et al. Activated pressureless infiltration of metal-matrix composites with graded activator content [J]. Composites: Part A, 2009, 40: 1566–1572.
[12]
？ KHODAEI M, ENAYATI M H, KARIMZADEH F. Mechanochemically synthesized Fe3Al–Al2O3 nanocomposite [J]. J Alloy Compd, 2009, 467(1–2): 159–162.
[13]
？ LEON C A, DREW R A L. Preparation of nickel-coated powders as precursors to reinforce MMCs [J]. J Mater Sci, 2000, 35: 4763–4768.
[14]
？ LEóN C A, DREWR A L. The influence of nickel coating on the wettability of aluminum on ceramics [J]. Composites: PartA, 2002, 33(10): 1429–1432.
