CHEN Qiang, TAN Dunqiang, YU Fangxin, et al. Powder Metall Ind (in Chinese), 2010, 20(6): 22–26.
[5]
？ SCHUBERT T H, TRINDADE B, WEI？G¨ARBER T, et al. Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications [J]. Mater Sci Eng, 2008(475): 39–44.
[6]
？ XIA Yang, SONG Yueqing, LIN Chenguang, et al. Effect of carbide formers on microstructure and thermal conductivity of diamond-Cu composites for heat sink materials [J]. Trans Nonferrous Met Soc China, 2009(10): 1161–1166.
HUANG Zuzhi, LUO Linghong, LU Quan, et al. J Chin Ceram Soc, 2008, 36(8): 1129–1133.
[13]
？ YANG T Y, JI H B, YOON S Y, et al. Porous mullite composite with controlled pore structure processed using a freeze casting of TBA- based coal fly ash slurries [J]. Res Conserv Recycl, 2010, 54: 816–820.
[14]
？ ZHANG Yumin, HU Luyang, HAN Jiecai, et al. Freeze casting of aqueous alumina slurries with glycerol for porous ceramics [J]. Ceram Int, 2010, 36: 617–621.
[15]
？ CHEN Yu, JACOB B, LI Tingshuai, et al. Novel functionally graded acicular electrode for solid oxide cells fabricated by the freeze-tape- casting process [J]. J Power Sources, 2012, 213: 93–99.
[16]
？ STEPHEN W S. Fabrication of functionally graded and aligned porosity in thin ceramic substrates with the novel freeze–tape-casting process [J]. J Am Ceram Soc, 2007, 90(7): 2024–2031.
[17]
？ REN Linlin, ZENG Yuping, JIANG Dongliang. Fabrication of gradient pore TiO2 sheets by a novel freeze–tape-casting process [J]. Am Ceram Soc, 2007(1): 3001–3004.
[18]
？ CRINA S, HANNA T, IVAR W, et al. Water-based tape-casting of SOFC composite 3YSZ/8YSZ electrolytes and ionic conductivity of their pellets [J]. Ceram Int, 2011(7): 1–9.
[19]
？ GANNON P, SOFIE S, DEIBERT M. Thin film YSZ coatings on functionally graded freeze cast NiO/YSZ SOFC anode supports [J]. Appl Electrochem, 2009(39): 497–502.
