全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

用塑性金属工艺制备Al–Al2O3复合无碳滑板

Full-Text   Cite this paper   Add to My Lib

Abstract:

以板状刚玉、电熔白刚玉、α-Al2O3微粉、金属Al粉为原料、热固性酚醛树脂为结合剂,利用过渡塑性相工艺在埋炭条件下于1450℃保温6h烧成制备Al–Al2O3复合无碳滑板。当Al含量为9%(质量分数)时,复合滑板的综合物理性能最佳,其显气孔率为4.1%,体积密度为3.27g/cm3,常温耐压强度为410MPa,1400℃保温30min后复合滑板的高温抗折强度为60.7MPa。通过设计化学反应并控制烧结气氛制备的复合滑板中,部分过渡相Al与材料中的C和气氛中的CO、N2反应生成Al4C3和AlN复合相,Al4C3进一步与材料中的Al2O3反应生成Al4O4C、Al2OC增强相,剩余的游离态Al仍为金属塑性相。Al–Al2O3复合滑板化学稳定性高、氧含量低,不含碳且不易水化,用于洁净钢时不会产生二次C、O、H及其它杂质的污染。

References

[1]  ? 范治博, 牛建平, 黄中东. 洁净钢生产技术的国内外现状和发展[J]. 热加工工艺, 2011, 40(8): 47–51.
[2]  FAN Zhibo, NIU Jianping, HANG Zhongdong. Mater Heat Treatm (in Chinese), 2011, 40(8): 47–51.
[3]  ? 洪彦若, 孙加林, 王玺堂, 等. 非氧化物复合耐火材料[M]. 北京: 冶金工业出版社, 2003: 1–57.
[4]  ? 李勇, 朱晓燕, 王佳平, 等. 反应烧结氮化硅–碳化硅复合材料的氮化机理[J]. 硅酸盐学报, 2011, 39(3): 447–451.
[5]  LI Yong, ZHU Xiaoyan, WANG Jiaping, et al. J Chin Ceram Soc, 2011, 39(3): 447–451.
[6]  ? 宋文, 陈俊红, 李勇, 等. 还原气氛下闪速燃烧合成氮化硅铁的高温行为[J]. 硅酸盐学报, 2011, 39(8): 1329–1333.
[7]  ?? 刘国齐, 王金相, 杨彬, 等. 热处理气氛对添加铝粉的铝碳材料性能和结构的影响[J]. 耐火材料, 2005, 39(1): 26–30.
[8]  LIU Guoqi, WANG Jinxiang, YANG Bin, et al. Refractory (in Chinese), 2005, 39(1): 26–30.
[9]  ? 卜景龙, 于之东, 杨晓春, 等. Al–AlN–Al2O3复相滑板的开发与应用性能[J]. 钢铁钒钛, 2004, 25(4): 24–28.
[10]  BU Jinglong, YU Zhidong, YANG Xiaochun, et al. Iron Steel Vanadium Titan (in Chinese), 2004, 25(4): 24–28.
[11]  ? 卜景龙, 杨晓春, 王瑞生, 等. 金属–氮化物结合刚玉质滑板抗渣性研究[J]. 硅酸盐学报, 2005, 32(2): 253–257.
[12]  BU Jinglong, YANG Xiaochun, WANG Ruisheng, et al. J Chin Ceram Soc, 2005, 32(2): 253–257.
[13]  ?? 田养利, 尹洪峰, 马艳龙. 金属–氮化物结合刚玉滑板的制备与性能研究[J]. 硅酸盐通报, 2009, 28(4): 805–809.
[14]  TIAN Yangli, YIN Hongfeng, MA Yanlong. Bull Chin Ceram Soc (in Chinese), 2009, 28(4): 805–809.
[15]  ? LIHRMANN J M. Thermodynamics of the Al2O3–Al4C3 systemⅠ. Thermochernical functions of Al oxide, carbide and oxycarbides between 298 and 2100 K [J]. J Eur Ceram Soc, 2008, 28(3): 633–642.
[16]  ? 陈肇友. 化学热力学与耐火材料[M]. 北京: 冶金工业出版社, 2005: 637–638.
[17]  ? HEYRMANZ M, CHATILLON C. Thermodynamics of the Al–C–O ternary system [J]. J Electrochem Soc, 2006, 153(7): 119–130. ?
[18]  SONG Wen, CHEN Junhong, LI Yong, et al. J Chin Ceram Soc, 2011, 39(8): 1329–1333.
[19]  ? 宋文, 孙加林, 李勇, 等. 合成工艺对氮化硅铁无相和结构的影响[J]. 硅酸盐学报, 2010, 38(7): 1281–1285.
[20]  SONG Wen, SUN Jialin, LI Yong, et al. J Chin Ceram Soc, 2010, 38(7): 1281–1285.
[21]  ? YU R, ZHANG X F, et al. Elastic constants and tensile properties of Al2OC by density functional calculations [J]. Phys Rev B, 2007, 75(10): 104114(1–5).
[22]  ? ZHAO Jianli, WANG Changan, AKRIA Y, et al. Carbothermic reduction synthesis and reaction dynamics of aluminum oxycarbide [J]. J Chin Ceram Soc, 2010, 38(10): 1292–1296.
[23]  ? YUAN Haibin, FENG Yuebin, YANG Bin, et al. Thermal behavior of alumina in process of carbothermic reduction and chloride to produce aluminum [J]. Chin J Nonferrous Met, 2010, 20(4): 777–783.
[24]  ? LI Xinjian, TANG Kun, LIU Zhongjiang, et al. Development of reproducing alumina–magnesia–carbon bricks [J]. China Refract, 2007, 16(3): 22–26.
[25]  ? SITNIKOV P A, LOPATIN S I, RYABKOV Y I, et al. Thermal stability of aluminum oxocarbides, russian [J]. J Gen Chem, 2004,74(7): 989–992.
[26]  ? ZHU F L, YANG B, YUAN H B, et al. Silica behavior in the alumina carbothermic reduction–chlorination process [J]. Miner Met Mater Soc, 2011, 63(8): 116–119.
[27]  ? LIHRMANN J M. Thermodynamics of the Al2O3–Al4C3 systemⅡ. Free energies of mixing, solid solubilities and activities [J]. J Eur Ceram Soc, 2008, 28(3): 643–647.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133