OALib Journal期刊
ISSN: 2333-9721
费用:99美元
|
|
|
高铝矾土的烧结动力学特征
DOI: 10.7521/j.issn.0454-5648.2014.03.18
Abstract:
研究了高铝矾土(Al2O388,Al2O3质量分数约为88%)的烧结动力学,借助于X射线衍射仪和扫描电子显微镜对Al2O388的烧结特性进行了表征。结果表明提高烧结温度有利于加快Al2O388的致密化进程。Al2O388的烧结符合液相烧结机理及特征高于1100℃,样品液相量逐渐增多并伴随有颗粒重排;约为1500℃时,烧结进入溶解--沉淀阶段,刚玉晶粒在液相中的溶解可加速传质、促进致密化;1600℃时烧结进入后期重结晶阶段,晶粒发育长大并形成封闭气孔。等温烧结动力学分析结果表明在1450、1500和1550℃,样品的线收缩率与时间在双对数坐标下呈现良好的线性关系,Al2O388的烧结激活能为289kJ/mol。
References
[1] | 徐平坤,董应榜. 刚玉耐火材料[M]. 北京:冶金工业出版社,2007: 1-5.
|
[2] | 钟香崇,李广平. 古冶矾土烧结性能的研究[J]. 钢铁, 1959, 5: 147-154.
|
[3] | ZHONG Xiangchong, LI Guangping. Iron Steel (in Chinese), 1959, 5: 147-154.
|
[4] | 钟香崇, 李广平. 高铝矾土加热过程的变化和烧结机理[J]. 硅酸盐学报, 1964, 3(4): 261-269, 279.
|
[5] | ZHONG Xiangchong, LI Guangping. J Chin Ceram Soc, 1964, 3(4): 261-269, 279.
|
[6] | 王金相, 钟香崇. 我国DK型烧结高铝矾土的结晶相和玻璃相的研究[J]. 硅酸盐学报, 1982, 9(3): 289-297.
|
[7] | WANG Jinxiang, ZHONG Xiangchong. J Chin Ceram Soc, 1982, 9(3): 289-297.
|
[8] | 杨中正. 烧结合成系列矾土基均质料的研究[D]. 郑州: 郑州大学, 2006.
|
[9] | YANG Zhongzheng. Research on preparing and sintering homogenized bauxite (in Chinese, dissertation). Zhenzhou: Zhenzhou University, 2006.
|
[10] | 高振昕, 刘百宽, 贺中央, 等. 水铝石热分解的晶体形貌[J]. 硅酸盐学报, 2011, 39 (10): 1570-1575.
|
[11] | GAO Zhenxin, LIU Baikuan, HE Zhongyang, et al. J Chin Ceram Soc, 2011, 39 (10): 1570-1575.
|
[12] | 高振昕. 铝土矿的烧结与均化烧结[J].耐火材料, 2011, 45(4): 246-252.
|
[13] | GAO Zhenxin. Naihuo Cailiao(in Chinese), 2011, 45(4): 246-252.
|
[14] | SINGH V K. Densification of alumina and sicica in the presence of a liquid phase[J]. J Am Ceram Soc, 1981, 64: c.133-c.136.
|
[15] | 饶东生. 硅酸盐物理化学[M], 北京:冶金工业出版社,1991: 260, 284-296.
|
[16] | KINGERY W D. Densification during sintering in the presence of a liquid phase. I theory[J]. J Appl Phys, 1959, 30(3): 301-306.
|
[17] | KINGERY W D.NARASIMHAN MD. Desification during sintering in the presence of a liquid phaseⅡ experimental[J]. J Appl Phys, 1960: 307-310.
|
[18] | 陆佩文.无机材料科学基础[M].武汉:武汉工业大学出版社,1996: 291.
|
[19] | 李楠, 李红霞, 张用宾. 中国耐火材料大典[M]. 北京: 冶金工业出版社, 2005: 42-43.
|
[20] | 孙义海, 张玉峰, 郭景坤. 添加剂对3Y-TZP材料烧结行为及力学性能的影响[J]. 硅酸盐学报, 2002, 30(5): 569-573.
|
[21] | SUN Yihai, ZHANG Yufeng, GUO Jingkun. J Chin Ceram Soc, 2002, 30(5): 569-573.
|
[22] | LESNIK N D. Microstructure formation and evolution in composites during liquidphase sintering[J]. Powder Metal Met Ceram, 2013, 51: 639-656.
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|