FEITEIRA J, RIBEIRO M S. Polymer action on alkali–silica reactionin cement mortar [J]. Cem Concr Res, 2013, 44: 97–105.
[2]
YANG Z, SHI X. Effect of styrene–butadiene rubber latex on thechloride permeability and microstructure of Portland cement mortar [J].Construct Build Mater, 2009, 23(6): 2283–2290.
[3]
KAN A, DEMIRBO?A R. Effect of cement and EPS beads ratios oncompressive strength and density of lightweight concrete [J]. Indian JEng Mater Sci, 2007, 14: 158–162.
[4]
AGGARWAL L K, THAPLIYAL P C, KARADE S R. Properties ofpolymer-modified mortars using epoxy and acrylic emulsions [J].Construct Build Mater, 2007, 21(2): 379–383.
[5]
SARAC A, ERBIL H Y, YILDIRIM H. Semicontinuous emulsionpolymerization of vinyl acetate: Effect of ethoxylation degree ofnonionic emulsifiers [J]. J Appl Polymer Sci, 2002, 86(4): 844–851.
[6]
SMITH O W, COLLINS M J, MARTIN P S. New vinyl estermonomers for emulsion polymers [J]. Prog Organ Coat, 1993, 22(1):19–25.
[7]
GOMES C E M, FERREIRA O P, FERNANDES M R. Influence ofvinyl acetate-versatic vinylester copolymer on the microstructuralcharacteristics of cement pastes [J]. Mater Res, 2005, 8(1): 51–56.
[8]
AFRIDI M U K, CHAUDHARY Z U, OHAMA Y. Strength and elasticproperties of powdered and aqueous polymer-modified mortars [J].Cem Concr Res, 1994, 24(7): 1199–1213.
[9]
AFRIDI M, OHAMA Y, IQBAL M Z. Water retention and adhesion ofpowdered and aqueous polymer-modified mortars [J]. Cem ConcrCompos, 1995, 17(2): 113–118.
[10]
WANG R, WANG P M. Action of redispersible vinyl acetate andversatate copolymer powder in cement mortar [J]. Construct BuildMater, 2011, 25(11): 4210–4214.
[11]
WANG R, WANG P M, YAO L J. Effect of redispersible vinyl acetateand versatate copolymer powder on flexibility of cement mortar [J].Construct Build Mater, 2012, 27(1): 259–262.
[12]
SHEN Y H, XIA D H, BAN Q. Effect of novel emulsifier DNS-330 onVeoVa10/VAc emulsion properties [J]. J Basic Sci Eng (in Chinese),2011, 19(6): 919–924.
BETIOLI A, HOPPE FILHO J, CINCOTTO M. Chemical interactionbetween EVA and Portland cement hydration at early-age [J]. ConstructBuild Mater, 2009, 23(11): 3332–3336.
[15]
MANSUR A, NASCIMENTO O L D, MANSUR H S.Physico-chemical characterization of EVA-modified mortar andporcelain tiles interfaces [J]. Cem Concr Res, 2009, 39(12):1199–1208.
[16]
SILVA D, ROMAN H, GLEIZE P. Evidences of chemical interactionbetween EVA and hydrating Portland cement [J]. Cem Concr Res, 2002,32(9): 1383–1390
[17]
AZNAR A, AMALVY J. Manufacture and testing of water-bornepaints by using vinyl latex containing VeoVa10？ monomer [J]. LatinAm Appl Res, 2006, 36(3): 149–154.
[18]
GOUGAR M, SCHEETZ B, ROY D. Ettringite and C-S-H Portlandcement phases for waste ion immobilization: A review [J]. WasteManag, 1999, 16(4): 295–303.
[19]
WANG R, WANG P M. Formation of hydrates of calcium aluminatesin cement pastes with different dosages of SBR powder [J]. ConstructBuild Mater, 2011, 25(2): 736–741.
[20]
WANG J, ZHANG S, YU H, et al. Study of cement mortars modifiedby emulsifier-free latexes [J]. Cem Concr Compos, 2005, 27(9):920–925.
[21]
JENNI A, HOLZER L, ZURBRIGGEN R, et al. Influence of polymerson microstructure and adhesive strength of cementitious tile adhesivemortars [J]. Cem Concr Res, 2005, 35(1): 35–50.
[22]
JENNI A, ZURBRIGGEN R, HOLZER L, et al. Changes inmicrostructures and physical properties of polymer-modified mortarsduring wet storage [J]. Cem Concr Res, 2006, 36(1): 79–90.
