MEGIAS-ALGUACIL D, TERVOORT E, CATTIN C, et al. Contactangle and adsorption behavior of carboxylic acids on α-Al2O3surfaces [J]. J Colloid Int Sci, 2011, 353: 512–518.
[2]
刘昊. SiC–Al2O3–ZrO2–C 复合粉体的表面改性及表征[D]. 沈阳: 沈阳大学, 2007.LIU Hao. Surface modification and characterization of compoundpowder of SiC–Al2O3–ZrO2–C (in Chinese, dissertation). Shenyang:Shenyang University, 2007.
[3]
李宝伟. 添加剂及热工艺对96 氧化铝陶瓷基片组织结构和性能的影响[D]. 北京: 北京航空材料研究院, 2004.LI Baowei. Influence of additives and sintering procedure onmicrostructure and properties of 96 alumina ceramic substrate (inChinese, dissertation). Beijing: Beijing Institute of AeronauticalMaterials, 2004
[4]
张新霓. α-Al2O3 水相悬浮体系分散性及稳定性的研究[D]. 青岛:青岛大学, 2005.ZHANG Xinni. Investigation on dispersion and stability of α-Al2O3aqueous suspension (in Chinese, dissertation). Qingdao: QingdaoUniversity, 2005.
[5]
武洪明. 助磨剂机理综述[C]//2010 中国水泥技术年会暨第十二届全国水泥技术交流大会, 南宁, 2010: 198–206.WU Hongming. Mechanism of grinding aids [C]//Cement TechnologyChina’2010, Nanning, 2010: 198–206.
[6]
郝成伟, 吴伯麟, 李继彦. 聚乙二醇分散剂对高纯超细α-Al2O3 制备的影响[J]. 材料导报, 2007, 21(8): 163–164, 167.HAO Chengwei, WU Bolin, LI Jiyan. Mater Rev (in Chinese), 2007,21(8): 163–164, 167.
申盛伟, 汪洋, 朱兵兵, 等. 超细粉体制备技术研究进展[J]. 环境工程, 2014, 9: 102–105, 124.SHEN Shengwei, WANG Yang, ZHU Bingbing, et al. Environ Eng (inChinese), 2014, 9: 102–105,124.
[9]
陈海阳, 周西臣, 徐鸣, 等. 超细氧化铝的制备及表征[J]. 石油大学学报(自然科学版), 2005, 29(1): 116–119, 122.CHEN Haiyang, ZHOU Xichen, XU Ming, et al. J Univ Pet (Nat SciEd, in Chinese), 2005, 29(1): 116–119, 122.
[10]
LI Xiaojie, QU Yandong, YAN Honghao, Research progress onnanosized materials synthesized by detonation method[J]. Rare MetMater Eng, 2007, 36(12): 2069–2074.
[11]
沈钟, 王果庭. 胶体与表面化学[M]. 北京: 化学工业出版社, 1997:30, 76–87.
[12]
王文利. 氧化锆粉末表面改性及其注射成形工艺研究[D]. 长沙:中南大学, 2008.WANG Wenli. Study on surface modification and injection molding ofzirconia powder (in Chinese, dissertation). Changsha: Central SouthUniversity, 2008.
童元丰, 陶锋烨, 李亚, 等. 砂磨机法在锆钛酸铅湿法粉碎中的应用[J]. 中国粉体技术, 2007(6): 50–51.TONG Yuanfeng, TAO Fengye, LI Ya, et al. China Powder Sci Tech (inChinese), 2007(6): 50–51.
[15]
BELOUSOVA N S, GORYAYNOVA O A, MELNIKOVA E V.Performance evaluation of Al2O3 powder dispersion by bead and ballMills [J]. Appl Mech Mater, 2014, 682: 32–34.
LI Changjin, WANG Yanmin, PAN Zhidong. Wear resistanceenhancement of electroless nanocomposite coatings via incorporationof alumina nanoparticles prepared by milling [J]. Mater Des, 2013, 47:443–448.
