Wei S,Mau S T,Vipulanandan C,et al.Performance of new sandwich tube under axial loading:analysis[J].Journal of Structural Engineering,1995,121(12):1806？1821.
[2]
Mohamed E,Zhao X L,Raphael G.Tests on concrete？filled double？skin (CHS outer and SHS inner) composite short columns under axial compression[J].Thin？Walled Structures,2002，40（5）:415？441.
[3]
李小伟，赵均海，朱铁栋，等.方钢管混凝土轴压短柱的力学性能[J].中国公路学报，2006，19（4）：77？81. LI Xiao？wei,ZHAO Jun？hai,ZHU Tie？dong,et al.Mechanics behavior of axially loaded short columns with concrete？filled square steel tube[J].China Journal of Highway and Transport,2006，19（4）：77？81.
[4]
黄宏,陶忠,韩林海.圆中空夹层钢管混凝土柱轴压工作机理研究[J].工业建筑,2006,36(11):11？14,36. HUANG Hong,TAO Zhong,HAN Lin？hai.Mechanism of concrete？filled double？skin steel tubular columns (CHS inner and CHS outer) subjected to axial compression [J].Industrial Construction,2006,36(11):11？14,36.
[5]
赵均海,郭红香,魏雪英.圆中空夹层钢管混凝土承载力研究[J].建筑科学与工程学报,2005,22(1):50？54. ZHAO Jun？hai,GUO Hong？xiang,WEI Xue？ying.Research on bearing capacity of concrete？filled double？skin steel tubes column[J].Journal of Architecture and Civil Engineering,2005,22(1):50？54.
[6]
翟越,魏雪英,计琳,等.薄壁圆筒在双剪统一强度理论下的统一解[J].长安大学学报：建筑与环境科学版,2004,21(3):1？3. ZHAI Yue,WEI Xue？ying,JI Lin,et al.Unified limit solutions for thin wall cylinder based on twin shear unified strength theory[J].Journal of Chang？an University:Architecture & Environment Science Edition,2004,21(3):1？3.
[7]
丁伯民.外压圆筒设计中的弹、塑性失效界限[J].化工设备与管道,2003,40(2):5？10. DING Bo？min.Limit of dividing elastic and plastic failure for cylinders subjected to external pressure [J].Process Equipment & Piping,2003,40(2):5？10.
[8]
丁伯民.外压薄壁和厚壁圆筒的壁厚界限:析GB 150―1998的修订[J].化工设备与管道,1999,36(3):39？44. DING Bo？min.Boundary of thin wall and thick wall cylinders subjected to external pressure:analysis of revision of GB 150―1998[J].Process Equipment & Piping,1999,36(3):39？44.
[9]
过镇海，王传志.多轴应力下混凝土的强度和破坏准则研究[J].土木工程学报，1991,24(3):1？14. GUO Zhen？hai，WANG Chuan？zhi.Investigation of strength and failure criterion of concrete under multi？axial stresses[J].China Civil Engineering Journal，1991,24(3):1？14.
