全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
化工进展  2015 

静电层层自组装改性SPPESK/PWA质子交换膜

DOI: 10.16085/j.issn.1000-6613.2015.12.024

Keywords: 层层自组装,质子交换膜,磺化聚芳醚砜酮,壳聚糖,磷钨酸

Full-Text   Cite this paper   Add to My Lib

Abstract:

运用直接掺杂法制备的磺化聚芳醚砜酮/磷钨酸(SPPESK/PWA)复合质子交换膜存在PWA流失严重的问题,影响了膜的正常使用。为了解决这一问题,以壳聚糖(CS)和PWA为聚阴阳离子电解质对,对复合膜进行静电层层(LBL)自组装改性研究,对膜的吸水率、溶胀度、质子传导率等性能进行了表征,并测试了膜中PWA的稳定性。经测定,SPPESK/PWA/(CS/PWA)2的质子传导率达到154mS/cm(80℃),高于相应的SPPESK膜(118mS/cm)及SPPESK/PWA膜(147mS/cm);SPPESK/PWA/(CS/PWA)4在80℃水中浸泡30天后,膜的质量损失率由18.45%降为11.81%,电导率损失率由32.20%降为16.77%。结果表明,该方法不仅提高了复合膜的质子传导率,并且有效抑制了PWA的流失。

References

[1]  Steele B C H,Heinzel A. Materials for fuel-cell technologies[J]. Nature,2001,414(6861):345-352.
[2]  Peighambardoust S J,Rowshanzamir S,Amjadi M. Review of the proton exchange membranes for fuel cell applications[J]. International Journal of Hydrogen Energy,2010,35(17):9349-9384.
[3]  吴魁,解东来. 高温质子交换膜研究进展[J]. 化工进展,2012,31(10):2202-2220. 浏览
[4]  Arico A S,Srinivasan S,Antonucci V. DMFCs:From fundamental aspects to technology development[J]. Fuel cells,2001,1(2):133-161. 3.0.CO;2-5 target="_blank">
[5]  Gu S,He G H,Wu X M,et al. Preparation and characterization of poly(vinylidene fluoride)/sulfonated poly(phthalazinone ether sulfone ketone) blends for proton exchange membrane[J]. Journal of Applied Polymer Science,2010,116(2):852-860.
[6]  Wu X,He G,Gu S,et al. Sulfonation of poly(phthalazinone ether sulfone ketone) by heterogeneous method and its potential application on proton exchange membrane (PEM)[J]. Journal of Applied Polymer Science,2007,104(2):1002-1009.
[7]  贺高红,焉晓明,吴雪梅,等. 燃料电池非氟质子交换膜的研究进展[J]. 膜科学与技术,2011,31(3):140-144.
[8]  Cui Z,Xing W,Liu C,et al. Chitosan/heteropolyacid composite membranes for direct methanol fuel cell[J]. Journal of Power Sources,2009,188(1):24-29.
[9]  Fu T,Wang J,Ni J,et al. Sulfonated poly(ether ether ketone)/aminopropyltriethoxysilane/phosphotungstic acid hybrid membranes with non-covalent bond:Characterization,thermal stability,and proton conductivity[J]. Solid State Ionics,2008,179(39):2265-2273.
[10]  Xu D,Zhang G,Zhang N,et al. Surface modification of heteropoly acid/SPEEK membranes by polypyrrole with a sandwich structure for direct methanol fuel cells[J]. Journal of Materials Chemistry,2010,20(41):9239.
[11]  李建波,许群. 层层自组装技术的发展与应用[J]. 世界科技研究与发展,2007,29(3):31-38.
[12]  Jiang S P,Tang H. Methanol crossover reduction by Nafion modification via layer-by-layer self-assembly techniques[J]. Colloids and Surfaces A:Physicochemical and Engineering Aspects,2012,407:49-57.
[13]  Zhao C,Lin H,Cui Z,et al. Highly conductive,methanol resistant fuel cell membranes fabricated by layer-by-layer self-assembly of inorganic heteropolyacid.[J]. Journal of Power Sources,2009,194(1):168-174.
[14]  Hammond P T. Engineering materials layer-by-layer:Challenges and opportunities in multilayer assembly[J]. AIChE Journal,2011,57(11):2928-2940.
[15]  Hu Z W,He G H,Gu S,et al. Montmorillonite-reinforced sulfonated poly(phthalazinone ether sulfone ketone) nanocomposite proton exchange membranes for direct methanol fuel cells[J]. Journal of Applied Polymer Science,2014,131(3):39852.[16] Wu X M,He G H,Gu S,et al. Novel interpenetrating polymer network sulfonated poly (phthalazinone ether sulfone ketone)/polyacrylic acid proton exchange membranes for fuel cell[J]. Journal of Membrane Science,2007,295(1-2):80-87.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133