Pan J,Sun P,Tian Y,et al. A novel method of tooth whitening using cold plasma microjet driven by direct current in atmospheric-pressure air[J]. IEEE Transactions on Plasma Science,2010,38(11):3143-3151.
[2]
Abdollah S,Anton Y N,Geyter N D,et al. Surface modification of polypropylene with an atmospheric pressure plasma jet sustained in argon and an argon/water vapour mixture[J]. Applied Surface Science,2011,257(20):8737-8741.
[3]
Yuri A,Michail G,Vladimir K,et al. Atmospheric-pressure nonthermal plasma sterilization of microorganisms in liquids and on surfaces[J]. Pure and Applied Chemisity,2008,80(9):1953-1969.
Kolb J F,Mohamed A H,Price R O,et al. Cold atmospheric pressure air plasma jet for medical applications[J]. Applied Physics Letters,2008,92(24):1501-1503.
Kolb J F,Frank R R. Cold DC-operated air plasma jet for the inactivation of infectious microorganisms[J]. IEEE Transactions on Plasma Science,2012,40(11):3007-3026.
[8]
Hao X L,Mattson A M,Edelblute C M,et al. Nitric oxide generation with an air operated non-thermal plasma jet and associated microbial inactivation mechanisms[J]. Plasma Processes and Polymers,2014,11(11):1044-1056.
[9]
Mohamed A H,Kolb J F,Schoenbach K H. Low temperature,atmospheric pressure,direct current microplasma jet operated in air,nitrogen and oxygen[J]. The European Physical Journal,2010,60:517-522.
[10]
Li J,Sakai N,Watanabe M,et al. Study on plasma agent effect of a direct-current atmospheric pressure oxygen-plasma jet on inactivation of E. coli using bacterial mutants[J]. IEEE Transactions on Plasma Science,2013,41(4):935-941.
[11]
Seo Y S,Mohamed A H,Woo K C,et al. Comparative studies of atmospheric pressure plasma characteristics between He and Ar working gases for sterilization[J]. IEEE Transactions on Plasma Science,2010,38(10):2954-2962.
Nikiforov A Y,Sarani A,Leys C. The influence of water vapor content on electrical and spectral properties of an atmospheric pressure plasma jet[J]. Plasma Sources and Technology,2011,20(1):15014-15021.
[14]
Jin Y,Ren C S,Yang L. Atmospheric pressure plasma jet in Ar and O2/Ar mixture:Properties and high performance for surface cleaning[J]. Plasma Science and Technology,2013,15(12):1023-1028.
[15]
Fang Z,Zhou Y D,Yao Z Q. The influences of water and oxygen contents on length of atmospheric pressure plasma jets in Ar/H2O and Ar/O2 mixtures[J]. IEEE Transactions on Plasma Science,2014,42(10):2618-2619.
[16]
Nikiforov A,Li L,Britun N,et al. Influence of air diffusion on the OH radicals and atomic O distribution in an atmospheric Ar (bio) plasma jet[J]. Plasma Sources and Technology,2014,23(1):1-11.
[17]
Yong C H,Won S K,Yoo B H,et al. Atmospheric pressure air-plasma jet evolved from microdischarges:Eradication of E. coli with the jet[J]. Physics of Plasmas,2009,16(12):123502.
[18]
Xian Y B,Wu S Q,Wang Z,et al. Discharge dynamics and modes of an atmospheric pressure non-equilibrium air plasma jet[J]. Plasma Processes and Polymers,2013,10:372-378.
[19]
Daeschlein G,Woedtke T V,Kindel E,et al. Antibacterial activity of an atmospheric pressure plasma jet against relevant wound pathogens in vitro on a simulated wound environment[J]. Plasma Processes and Polymers,2010,7:224-230.
[20]
Zhang X H,Liu D P,Wang H Z,et al. Highly effective inactivation of Pseudomonas sp. HB1 in water by atmospheric pressure microplasma jet array[J]. Plasma Chemistry Plasma Process,2012,32(5):949-957.
[21]
Laroussi M,Leipold F. Evaluation of the roles of reactive species,heat,and UV radiation in the inactivation of bacterial cells by air plasmas at atmospheric pressure[J]. International Journal of Mass Spectrometry,2004,233:81-86.
[22]
Hak J A,Kang K,Nguyen N H,et al. Targeting cancer cells with reactive oxygen and nitrogen species generated by atmospheric pressure air plasma[J]. PLOS,2014,9(1):1371-1384.
[23]
Oh J K,Furuta H,Hatta A,et al. Investigating the effect of additional gases in an atmospheric-pressure helium plasma jet using ambient mass spectrometry[J]. Japanese Journal of Applied Physics,2015,54:01AA03.
Xiao D Z,Cheng C,Shen J,et al. Characteristics of atmospheric-pressure non-thermal N2 and N2/O2 gas mixture plasma jet[J]. Journal of Applied Physics,2014,115(3):1-11.
[26]
Huang C,Yu Q,Hsieh F,et al. Bacterial deactivation using a low temperature argon atmospheric plasma brush with oxygen addition[J]. Plasma Processes and Polymers,2007,4:77-87.
Keudell A,Awakowicz P,Benedikt J,et al. Inactivation of bacteria and biomolecules by low-pressure plasma discharges[J]. Plasma Processes and Polymers,2010,7:327-352.
[29]
Hong Y F,Kang J G,Lee H Y,et al. Sterilization effect of atmospheric plasma on E. coli and Bacillus subtilis endospores[J]. Letters in Applied Microbiology,2009,48:33-37.
[30]
Wu Y,Liang Y D,Wei K,et al. Rapid allergen inactivation using atmospheric pressure cold plasma[J]. Environmental Science and Technology,2014,48:2901-2909.
[31]
Liang Y D,Wu Y,Sun K,et al. Rapid inactivation of biological species in the air using atmospheric pressure nonthermal plasma[J]. Environmental Science and Technology,2012,46:3360-3368.
[32]
Lu X P,Wu S Q. On the active species concentrations of atmospheric pressure nonequilibrium plasma jets[J]. IEEE Transactions on Plasma Science,2013,41(8):2313-2326.
Li S Z,Lim J. Comparison of sterilizing effect of nonequilibrium atmospheric-pressure He/O2 and Ar/O2 plasma jets[J]. Plasma Science and Technology,2008,10(1):61-64.
[35]
Zhao S S,Xiong Z L,Mao X,et al. Atmospheric pressure room temperature plasma jets facilitate oxidative and nitrative stress and lead to endoplasmic reticulum stress dependent apoptosis in HepG2 cells[J]. Plasma Lead to Stress-Dependent Apoptosis,2013,8(8):e73665.
Ku Y B,Yong H K,Young H R,et al. Feeding-gas effects of plasma jets on Escherichia coli in physiological solutions[J]. Plasma Process Polymers,2013,10(3):235-242.
[38]
Lin Y S,Chen Y C,Shie P S. Enhanced lithium electrochromic performance of flexible tungsten oxide films by tantalum addition with an atmospheric pressure plasma jet[J]. Solar Energy Materials & Solar Cells,2014,122(3):59-69.
[39]
Lin Y S,Chen Y C,Tien S W. Effects of oxygen addition on enhancing electrochromic performance of flexible tungsten/tantalum oxide films using an atmospheric pressure plasma jet[J]. Surface & Coatings Technology,2013,221(5):173-181.
[40]
Seo K-S,Cha J-H,Han M-K,et al. Surface treatment of glass and poly(dimethylsiloxane) using atmospheric-pressure plasma jet and analysis of discharge characteristics[J]. Japanese Journal of Applied Physics,2015,54:01AE06.
[41]
Cheng C,Zhang L Y,Zhan R J. Surface modification of polymer fibre by the new atmospheric pressure cold plasma jet[J]. Surface & Coatings Technology,2006,200(24):6659-6665.
[42]
Gao Z Q,Sun J,Peng S J,et al. Surface modification of a polyamide 6 film by He/CF4 plasma using atmospheric pressure plasma jet[J]. Applied Surface Science,2009,256(15):1496-1501.
[43]
Borcia G,Brown N M,Dixon D,et al. The effect of an air-dielectric barrier discharge on the surface properties and peel strength of medical packaging materials[J]. Surface & Coatings Technology,2004,179(1):70-71.
[44]
Shao X J,Zhang G J,Zhan J Y,et al. Research on surface modification of polytetrafluoroethylene coupled with argon dielectric barrier discharge plasma jet characteristics[J]. IEEE Transactions on Plasma Science,2011,39(11):3095-3102.
[45]
Joo H N,Hong K B,Insup N,et al. Surface modification of polytetrafluoroethylene using atmospheric pressure plasma jet for medical application[J]. Surface & Coatings Technology,2007,201(2):5097-5101.
[46]
Lin Y S,Weng M S,Chung T W,et al. Enhanced surface hardness of flexible polycarbonate substrates using plasma-polymerized organosilicon oxynitride films by air plasma jet under atmospheric pressure[J]. Surface & Coatings Technology,2011,205(14):3856-3864.
[47]
Sun P,Pan J,Tian Y,et al. Tooth whitening with hydrogen peroxide assisted by a direct-current cold atmospheric-pressure air plasma micro jet[J]. IEEE Transactions on Plasma Science,2010,38(8):1892-1896.
[48]
Nam S H,Lee H W,Hong J W,et al. Enhanced long-term color stability of teeth treated with hydrogen peroxide and non-thermal atmospheric pressure plasma jets[J]. Plasma Processes and Polymers,2014,11:1010-1017.
