Elisa P, Serena C, Francesca C. Some recent advances in polyolefin functionalization[J]. Polymer International, 2014, 63(1):12-21.
[2]
Pouyan S, Costas T, Maria A P, et al. Radiation induced long chain branching in high-density polyethylene through a reactive extrusion process[J]. Macromolecular Reaction Engineering, 2014, 8(2):100-111.
[3]
Francoise B, Jean-Jacques F, Bruno V. Grafting of maleic anhydride on polypropylene by reactive extrusion:Effect of maleic anhydride and peroxide concentrations on reaction yield and products characteristics[J]. Journal of Polymer Engineering, 2013, 33(8):673-682.
Passaglia E, Coiai S, Augier S. Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymers[J]. Progress in Polymer Science, 2009, 34(9):911-947.
[6]
Brandrup J, Immergut E H, Grulke E A. Polymer Handbook[M]. New York:John Wiley & Sons Inc, 2003:567-570.
Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Itaconic acid grafting on LDPE blended in molten state[J]. Journal of Applied Polymer Science, 1997, 65(8):1493-1502. 3.0.CO;2-B target="_blank">
[10]
Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Free-radical grafting of itaconic acid onto LDPE by reactive extrusion:I. Effect of initiator solubility[J]. Polymer, 2001, 42(2):469-475.
[11]
Krivoguz Y M, Pesetskii S S, Jurkowski B. Grafting of itaconic acid onto LDPE by the reactive extrusion:Effect of neutralizing agents[J]. Journal of Applied Polymer Science, 2003, 89(3):828-836.
Verbeek C J R, Hanipah S H. Grafting itaconic anhydride onto polyethylene using extrusion[J]. Journal of Applied Polymer Science, 2010, 116(6):3118-3126.
[15]
Pesetskii S S, Jurkowski B, Makarenko O A. Free radical grafting of itaconic acid and glycidyl methacrylate onto PP initiated by organic peroxides[J]. Journal of Applied Polymer Science, 2002, 86(1):64-72.
Chen Q H, Deng Y, Mao X G. Preparation and reaction kinetics of polypropylene-graft-cardanol by reactive extrusion and its compatibilization on polypropylene/polystyrene[J]. Journal of Applied Polymer Science, 2014, 131(4):DOI:10.1002/app.39911.
Yazdani-Pedrama M, Vega H, Quijada R. Melt functionalization of polypropylene with methyl esters of itaconic acid[J]. Polymer, 2001, 42(10):4751-4758.
[20]
Yazdani-Pedram M, Vega H, Retuert J, et al. Compatibilizers based on polypropylene grafted with itaconic acid derivatives. Effect on polypropylene/polyethylene terephthalate blends[J]. Polymer Engineering and Science, 2003, 43(4):960-964.
[21]
Krivoguz Y M, Pesetskii S S. Free-radical grafting of methylenebutanedioic acid to polypropylene polyethylene blends and rheological properties of melts[J]. Russian Journal of Applied Chemistry, 2005, 78(2):305-310.
[22]
Kalyanee S, Marnviga B. Improved silane grafting of high-density polyethylene in the melt by using a binary initiator and the properties of silane-crosslinked products[J]. Journal of Polymer Research, 2013, 20(4):DOI:10.1007/s10965-013-0120-x.
[23]
Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. PP/LDPE blends produced by reactive processing.I.Grafting efficiency and rheological and high-elastic properties of[PP/LDPE]-g-IA melts[J]. Journal of Applied Polymer Science, 2006, 102(6):5095-5104.
[24]
Bruna J, Yazdani-Pedram M, Quijada R, et al. Melt grafting of itaconic acid and its derivatives onto an ethylene-propylene copolymer[J]. Reactive & Functional Polymers, 2005, 64(3):169-178.
Sadik T, Massardier V, Becquart F, et al. Radical grafting of polar monomers onto polypropylene by reactive extrusion[J]. Journal of Applied Polymer Science, 2013, 129(4):2177-2188.
[31]
Krivoguz Y M, Yuvchenko A P, Zvereva T D, et al. Grafting of methylenebutanedioic acid to low-density polyethylene in the course of reactive extrusion, initiated with carborane-containing peroxides[J]. Russian Journal of Applied Chemistry, 2001, 74(5):845-850.
Zhao Y X, Ma Y J, Yao W, et al. Styrene-assisted grafting of maleic anhydride onto isotactic poly butene-1[J]. Polymer Engineering and Science, 2011, 51(12):2483-2489.
[34]
Passaglia E, Coiai S, Cicogna F, et al. Some recent advances in polyolefin functionalization[J]. Polymer International, 2014, 63(1):12-21.
[35]
段良福. 聚烯烃反应挤出接枝衣康酸的研究[D]. 青岛:青岛科技大学, 2007.
[36]
Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Solubilityof additives:Grafting of itaconic acid onto ldpe by reactive extrusion. II. Effect of stabilizers[J]. Journal of Applied Polymer Science, 2001, 81(14):3439-3448.
[37]
Pesetskii S S, Jurkowski B, Krivoguz Y M, et al. Oxidation of LDPE and LDPE grafted with itaconic acid, in contact with water[J]. Polymer, 2000, 41(3):1037-1043.
[38]
Wojtala A, Czaja K, Sudo？ M, et al. Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests[J]. Journal of Applied Polymer Science, 2012, 124(2):1634-1642.
[39]
Pesetskii S S, Krivoguz Y M, Jurkowski B. Structure and properties of polyamide 6 blends with lowdensity polyethylene grafted by itaconic acid and with neutralized carboxyl groups[J]. Journal of Applied Polymer Science, 2004, 92(3):1702-1708.
[40]
Jurkowski B, Pesetskii S S, Olkhov Y A, et al. Investigation of molecular structure of LDPE modified by itaconic acid grafting[J]. Journal of Applied Polymer Science, 1999, 71(11):1771-1779. 3.0.CO;2-6 target="_blank">
[41]
Krivoguz Y M, Pesetskii S S, Jurkowski B, et al. Structure and properties of polypropylene/low-density polyethylene blends grafted with itaconic acid in the course of reactive extrusion[J]. Journal of Applied Polymer Science, 2006, 102(2):1746-1754.
