全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
化工进展  2015 

微通道下费托合成催化剂层涂覆厚度的数值研究

DOI: 10.16085/j.issn.1000-6613.2015.03.008, PP. 652-658

Keywords: 微通道,费托合成,反应动力学,催化剂层厚度,数值分析

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用COMSOL-Multiphysics软件,针对Fe基催化剂费托合成反应动力学特性,建立了耦合流动、传热、传质、化学反应多物理场的二维数值计算单元模型,研究微通道内的费托合成反应。重点研究了催化剂涂层厚度、冷却介质流速对微通道内传热传质、费托反应产物分布的影响规律。模拟结果表明沿反应通道轴向方向,催化剂涂层温度呈先升高后降低的趋势;随着催化剂涂层厚度的增加,温度峰值出现的位置逐渐远离出口,CO转化率提高,CH4的选择性增大,而C5+的选择性逐渐减小;提高冷却介质流速有利于实现较好的温度控制,显著降低CH4的选择性,提高C5+选择性;对于截面尺寸为0.6×0.6mm2、长度为200mm的微通道结构,较佳的催化剂涂层厚度为0.1mm,随着冷却侧冷却能力的增强,较佳的催化剂涂层厚度变大。

References

[1]  Dry M E.The Fischer-Tropsch process:1950-2000[J].Catalysis Today, 2002, 71(3):227-241.
[2]  侯朝鹏, 夏国富, 李明丰, 等.FT 合成反应器的研究进展[J].化工进展, 2011, 30(2):251-257. 浏览
[3]  Deshmukh S R, Tonkovich A L Y, Jarosch K T, et al.Scale-up of microchannel reactors for Fischer-Tropsch synthesis[J].Industrial & Engineering Chemistry Research, 2010, 49(21):10883-10888.
[4]  Van Der Laan G P, Beenackers A.Kinetics and selectivity of the Fischer-Tropsch synthesis:A literature review[J].Catalysis Reviews, 1999, 41(3-4):255-318.
[5]  Ehrfeld W, 埃尔费尔德, Hessel V, et al.微反应器:现代化学中的新技术[M].北京:化学工业出版社, 2004.
[6]  Cao C, Hu J, Li S, et al.Intensified Fischer-Tropsch synthesis process with microchannel catalytic reactors[J].Catalysis Today, 2009, 140(3):149-156.
[7]  Arzamendi G, Diéguez P M, Montes M, et al.Computational fluid dynamics study of heat transfer in a microchannel reactor for low-temperature Fischer-Tropsch synthesis[J].Chemical Engineering Journal, 2010, 160(3):915-922.
[8]  Gumuslu G, Avci A K.Parametric analysis of Fischer-Tropsch synthesis in a catalytic microchannel reactor[J].AIChE Journal, 2012, 58(1):227-235.
[9]  马文平, 李永旺, 赵玉龙, 等.工业Fe-Cu-K 催化剂上费托合成反应动力学(Ⅰ):基于机理的动力学模型[J].化工学报, 1999, 50(2):159-166. 浏览
[10]  Yates I C, Satterfield C N.Intrinsic kinetics of the Fischer-Tropsch synthesis on a cobalt catalyst[J].Energy & Fuels, 1991, 5(1):168-173.
[11]  王逸凝, 李永旺, 马文平, 等.费托合成(FTS) 动力学模拟——烯烃再吸附[J].燃料化学学报, 1999, 27(s1):123-127.
[12]  Wang Y N, Ma W P, Lu Y J, et al.Kinetics modelling of Fischer-Tropsch synthesis over an industrial Fe-Cu-K catalyst[J].Fuel, 2003, 82(2):195-213.
[13]  Bayat M, Hamidi M, Dehghani Z, et al.Sorption-enhanced Fischer-Tropsch synthesis with continuous adsorbent regeneration in GTL technology:Modeling and optimization[J].Journal of Industrial and Engineering Chemistry, 2014, 20(3):858-869.
[14]  常勇强, 曹子栋, 赵振兴, 等.多组分气体热物性参数的计算方法[J].动力工程学报, 2010(10):772-776.
[15]  朱炳辰.化学反应工程[M].北京:化学工业出版社, 2007.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133