FU Guilong，CHENG Xiaosheng. Method of open NC system based on PC[J]. Machininery Design & Manufacture Engeering， 2000,29(1):45-46,57(in Chinese).[傅桂龙，程筱胜. 基于PC的开放式数控系统实现方法[J]. 机械设计与制造工程，2000,29(1):45-46,57.]
[2]
WANG Lisong, SU Baoku, DONG Shen, ZHANG Feihu. Double CPU open CNC system based on programmable multi-axis controller[J]. Computer Integrated Manufacturing System—CIMS，2002, 8(1)：69-72(in Chinese).[王立松，苏宝库，董申，张飞虎. 可编程多轴控制器的开放式数控系统[J]. 计算机集成制造系统—CIMS，2002, 8(1)：69-72.]
[3]
YANG Qiang, LI Tangqiu. Win9x virtual device driver programming manual [M]. Beijing:Tinghua Univ. Press,1999(in Chinese).[杨强，李堂秋.Win9x虚拟设备驱动程序编程指南[M].北京：清华大学出版社，1999.]
[4]
WANG Huiwen. Partial least-squares regression method and application[M]. Beijing: National Defence Industry Press,1999（in Chinese）.[王惠文.偏最小二乘回归方法及其应用[M].北京：国防工业出版社，1999.]
[5]
LIU Qiang, ALTIN Y. PC/DSP based open system architecture intelligent machining module[J]. Journal of Beijing University of Aeronautics and Astronautics，2000, 26(2):213-217(in Chinese).[刘强，ALTIN Y. 基于PC/DSP的开放系统结构智能切削模块[J].北京航空航天大学学报，2000, 26(2)：213-217.]
