CHEN Zhiyang. Reverse engineering CAD modeling based on triangular surface[J]. Chinese Mechanical Engineer，2003,14(8)：698-700(in Chinese). [陈志杨.基于三角曲面的逆向工程CAD建模方法[J].中国机械 工程，2003,14(8):698-700.]
[2]
LIU Changqing, PENG Xiang, ZHANG Zonghua, HU Xiaotang. Large data processing based on reverse engineering[J]. Journal of Engineering Graphics, 2002，(4)：34-39(in Chinese).[刘常青,彭翔,张宗华,胡小唐.基于逆反工程（RE）多数据点云的处理[J].工程图学学报,2002，(4)：33-39.]
[3]
CHENG Jianmei, CHEN Chongxi, SUN Honglin. Automatic generation of contour in triangule mesh and its programming[J]. Journal of Hydraulic Engineering, 1998，(10)：34-39(in Chinese).[成建梅，陈崇希，孙红林.三角网格等值线自动生成方法及程序实现[J].水利学报，1998，(10)：23-26.]
[4]
SUN Jiaguang,et al. Computer graphics（third edition）[M].Beijing:Tsinghua University Press, 1998(in Chinese).[孙家广，等.计算机图形学（第三版）[M].北京：清华大学出版社，1998.]
[5]
VARADY T,MARTIN R R,COX J. Reverse engineering of geometric models-an introduction[J]. Computer-Aided Design ，1997,29(4)：255-268.
[6]
LES Piegl . On NURBS:a survey[J]. IEEE Computer Graphics & Applications, 1991,10(1)：55-71.
[7]
VARADY T, BENKO P. Reverse engineering regular objects: simple segmentation and surface fitting procedures[J]. Int.Jour. of Shape Modeling，1998,（4）:127-141.
[8]
CHEN Zhiyang, QIAN Jinfeng, YE Xiuzi. Solid modeling of STL data in reverse engineering[J]. Chinese Mechanical Engineer.，2003,14(21)：1760-1763(in Chinese).[陈志杨，钱锦锋，叶修梓.基于STL模型的逆 向工程实体建模技术[J].中国机械工程，2003,14(21):1760-1763.]
