SHAN Y, WANG S, Tong S. Uneven offset method of NC tool path generation for free-form pocket machining[J]. Computers in Industry, 2000, 43（1）:97-103.
[2]
KUN T, AMINE E L, SANJAY J.Software ompensation of rapid prototyping machines[J]. Precision Engineering, 2004, 28（3）: 280-292.
[3]
LIU Bin, XIAO Yuejia, HAN Ming，et al. Study on automatic compensation of line width for rapid prototyping technology[J]. Chinese Mechanical Engineering, 1996, 7(5):43-46(in Chinese).[刘斌，肖跃加，韩明，等. 快速原型制造技术中的线宽自动补偿研究[J].中国机械工程，1996，7（5）：43-46.]
[4]
YANG D C H, JOU Y, KONG T, et al. Laser beam diameter compensation for Helisys LOM machine[A]. Proceedings of the 6th International Conference on Rapid Prototyping\[C\].Dayton,OH,USA:Society of Manufacturing Engineer,1995. 171-178.
[5]
ZHAO Yi. Research on the control of laser scanning and the stereolithography process[D]. Xian: Xian Jiaotong University, 1997(in Chinese).[赵毅. 光固化快速成型的扫描控制与制作工艺的研究[D]. 西安： 西安交通大学，1997.]
[6]
ZHANG Lichao, HAN Ming, HUANG Shuhuai. Study of effective laser radius compensate algorithm for rapid prototyping[J]. Journal of Huazhong University of Science and Technology(Natural Science Edition), 2002, 30(6):16-18(in Chinese).[张李超，韩明，黄树槐. 快速成形激光光斑半径补偿算法的研究\[J\]. 华中科技大学学报，2002，30（6）：16-18.\]
[7]
WANG X. Calibration of shrinkage and beam offset in SLS process [J]. Rapid Prototyping Journal, 1999, 5(3):129-133.
[8]
YANG Y, LOH H T, FUH Y H, et al. Equidistant path generation for improving scanning efficiency in layered manufacturing[J]. Rapid Prototyping Journal, 2002, 8(1):30-37.
[9]
JACOBS P F. Rapid prototyping & manufacturing: fundamentals of stereolithography[A]. Society of Manufacturing Engineers SME-CASA[C]. Dearborn, USA:Nichigan,1992. 1-23.
[10]
YONG S S, LEE K. NC milling tool path generation for arbitrary pockets defined by sculptured surfaces[J]. Computer Aided Design, 1990, 22(5): 273-284.
