ZHANG Bo-peng,ZHANG Nian-song.Self-evolutionary compensation of machine tool crossbeam deformation induced bygravity[J].Journal of Tsinghua University,2006,46(2):191-193.
[2]
陈进虎,邵振廷,鲁晓南,等.合理选择大件刚度——重型数控龙门铣大件设计[J].制造技术与机床,2006(12):54-57.CHENJin-hu,SHAO Zhen-ting,LUXiao-nan,et al.Rigidity value determination for large parts—design of large parts for NCheavy-duty gantry milling machine[J].Manufacturing Technology&Machine Tool,2006(12):54-57.(in Chinese)
[3]
谢淑芳.基于ADAMS的高性能工作台刚柔耦合模型虚拟样机研究[D].北京:北京航空航天大学机械工程及自动化学院,2006.XIE Shu-fang.Virtual prototype research on rigid-flexible coupling model of high-performance stage based on ADAMS[D].Beijing:Mechanical Engineering and Automation Institute,Beijing University of Aeronautics&Astronautics,2006.(inChinese)
[4]
ZIENKIEWICZ O C,CHEUNG Y K.The finite element method in structural and continuum nechanics[M].London:McGraw-Hill,1967:36-112.
[5]
董雪娇.大型数控龙门铣床重载横梁导轨接触的变形分析[D].北京:北京工业大学机械工程与应用电子技术学院,2010.DONG Xue-jiao.The deformation analysis about guide way contact of large-scale numerical control milling planer heavy loadcross-rail[D].Beijing:College of Mechanical Engineering and Applied Electronics Technology,Beijing University ofTechnology,2010.(in Chinese)
[6]
许丹,刘强,袁松梅,等.一种龙门式加工中心横梁的动力学仿真研究[J].振动与冲击,2008,27(2):168-172.XU Dan,LIU Qiang,YUAN Song-mei,et al.Dynamic simulation for a gantry machining center beam[J].Journal ofVibration and Shock,2008,27(2):168-172.(in Chinese)
[7]
谢黎明,李大明,沈浩,等.基于有限元分析的现场铣床横梁结构优化[J].组合机床与自动化加工技术,2008(9):73-75.XIE Li-ming,LI Da-ming,SHENHao,et al.Optimum design of scene milling machine beam based on finite element analysis[J].Modular Machine Tool&Automatic Manufacturing Technique,2008(9):73-75.(in Chinese)
[8]
ZATARAIN M,LEJARDI E,EGANA F.Modular synthesis of machine too1s[J].Annals of the CIRP,1998,47(1):333-336.
