何涛,王宝雨,胡正寰.偏心截面轴类零件的楔横轧成形数值模拟[J].锻压技术,2008,33(2):53-55.HE Tao,WANG Bao-yu,HU Zheng-huan.Numerical simulation on cross wedge rolling of shaft parts with eccentric section[J].Forging&Stamping Technology,2008,33(2):53-55.(in Chinese)
马振海,杨翠苹,胡正寰.楔横轧轧件端头凹心影响因素的研究[J].锻压技术,2002,27(1):29-31.MA Zhen-hai,YANG Cui-ping,HU Zheng-huan.Study on effect factors of end concavity in cross wedge rolling[J].Forging&Stamping Technology,2002,27(1):29-31.(in Chinese)
[4]
马振海,胡正寰,杨翠苹,等.楔横轧展宽段的变形特征与应力应变分析[J].北京科技大学学报,2002,24(3):309-312.MA Zhen-hai,HU Zheng-huan,YANG Cui-ping,et al.Deformation character and analysis of stress and strain duringstretching stage for cross wedge rolling[J].Journal of University of Science and Technology Beijing,2002,24(3):309-312.(in Chinese)
赵静,鲁力群,胡正寰.楔横轧多楔成形等直径轴类件内部疏松的理论与实验研究[J].塑性工程学报,2008,15(1):108-111,126.ZHAO Jing,LU Li-qun,HU Zheng-huan.Theorectical and experimental study on internal defect of equal diameter axis formedin multi-wedge cross wedge rolling[J].Journal of Plasticity Engineering,2008,15(1):108-111,126.(in Chinese)
[7]
聂广占,束学道,李传民.楔横轧特大型轴类件变形特征研究[J].冶金设备,2007,166(6):6-10.NIE Guang-zhan,SHU Xue-dao,LI Chuan-min.Study on deformation character of oversize axes during cross wedge rolling[J].Metallurgical Equipment,2007,166(6):6-10.(in Chinese)
[8]
束学道,闫波,邢希东,等.楔横轧楔入段端面移动量规律[J].机械工程学报,2009,45(1):131-134.SHU Xue-dao,YAN Bo,XING Xi-dong,et al.Investigation into regularity of movement of the end of wedged parts for crosswedge rolling[J].Chinese Journal of Mechanical Engineering,2009,45(1):131-134.(in Chinese)
[9]
束学道,彭文飞,聂广占,等.楔横轧大型轴类件轧制力规律研究[J].塑性工程学报,2009,16(1):102-105.SHU Xue-dao,PENG Wen-fei,NIE Guang-zhan,et al.The study of rolling force on forming large-sized shaft-part by crosswedge rolling[J].Journal of Plasticity Engineering,2009,16(1):102-105.(in Chinese)
[10]
杜凤山,汪飞雪,杨勇.三辊楔横轧空心件成形机理的研究[J].中国机械工程,2005,16(24):224-225.DU Feng-shan,WANG Fei-xue,YANG Yong.Study on compacting mechanism of hollow workpiece by 3-roll cross wedgebolling[J].China Mechanical Engineering,2005,16(24):224-225.(in Chinese)
[11]
贾震,张康生,杨翠苹,等.楔横轧一次楔大断面收缩率成形机理[J].北京科技大学学报,2009,31(8):1046-1050.JIA Zhen,ZHANG Kang-sheng,YANG Cui-ping,et al.Forming principle of heavy section shrinkage cross wedge rolling bysingle wedge[J].Journal of University of Science and Technology Beijing,2009,31(8):1046-1050.(in Chinese)
[12]
束学道,李传民,李连鹏,等.工艺参数对楔横轧接触区表面应力的影响分析[J].中国机械工程,2007,18(7):851-854.SHU Xue-dao,LI Chuan-min,LI Lian-peng,et al.Influence analysis of processing parameter on the surface stress of contactzone in cross wedge rolling[J].China Mechanical Engineering,2007,18(7):851-854.(in Chinese)
[13]
杨翠苹,张康生,刘晋平,等.三辊横轧应力应变场对内部缺陷的影响[J].北京科技大学学报,2006,28(5):464-467.YANG Cui-ping,ZHANG Kang-sheng,LIU Jin-ping,et al.Internal defects in rolled pieces during three-roll cross wedgerolling[J].Journal of University of Science and Technology Beijing,2006,28(5):464-467.(in Chinese)
[14]
应富强,张更超,潘孝勇.金属塑性成形中的三维有限元模拟技术探讨[J].锻压技术,2004,29(2):1-5.YING Fu-qiang,ZHANG Geng-chao,PAN Xiao-yong.Approach to the technique of three-dimensional finite elementsimulation in metal forming[J].Forging&Stamping Technology,2004,29(2):1-5.(in Chinese)
[15]
刘桂华,徐春国,任广升.楔横轧三维变形过程的有限元数值模拟研究[J].锻压技术,2001,26(6):32-35.LIU Gui-hua,XU Chun-guo,REN Guang-sheng.Research on FEM numerical simulation of three-dimension deformation ofcross wedge rolling[J].Forging&Stamping Technology,2001,26(6):32-35.(in Chinese)
[16]
李传民,束学道,胡正寰.楔横轧多楔轧制铁路车轴可行性有限元分析[J].中国机械工程,2006,17(19):2017-2019.LI Chuan-min,SHU Xue-dao,HU Zheng-huan.Feasibility study on multi-wedge cross wedge rolling of railway axles withfinite element analysis[J].China Mechanical Engineering,2006,17(19):2017-2019.(in Chinese)
[17]
王明龙,张康生,娄依志,等.楔横轧二次楔入力能参数试验研究[J].锻压技术,2007,32(4):25-29.WANG Ming-long,ZHANG Kang-sheng,LOU Yi-zhi,et al.Experimental study on mechanical parameters of second wedgeheavy section shrinkage[J].Forging&Stamping Technology,2007,32(4):25-29.(in Chinese)
