ROY A,CHATTERJEE A.Vibrations of a beam invariable contact with a flat surface[J].Journal ofVibration and Acoustics,2009,131(4):82-89.
[2]
朱岳东,张志军.基于动力学特征的车铣机床横梁的优化设计[J].沈阳工业学院学报,2004,23(4):11-13.ZHU Yue-dong,ZHANG Zhi-jun.Optimum design ofturn-milling machine tools beam based on dynamicscharacteristics[J].Journal of Shenyang Institute ofTechnology,2004,23(4):11-13.(in Chinese)
[3]
罗传林,李锻能.龙门式机床横梁的结构设计研究[J].机电工程技术,2006,35(3):45-47.LUO Chuan-lin,LI Duan-neng.Design and research of thestructural of cross-rail in the planer type machines[J].Mechanical&Electrical Engineering Technology,2006,35(3):45-47.(in Chinese)
[4]
谢黎明,李大明,沈浩,等.基于有限元分析的现场铣床横梁结构优化[J].组合机床与自动化加工技术,2008(9):73-75.XIE Li-ming,LI Da-ming,SHEN Hao,et al.Optimumdesign of scene milling machine beam based on finite elementanalysis[J].Modular Machine Tool&AutomaticManufacturing Technique,2008(9):73-75.(in Chinese)
[5]
许丹,刘强,袁松梅,等.一种龙门式加工中心横梁的动力学仿真研究[J].振动与冲击,2008,27(2):168-172.XU Dan,LIU Qiang,YUAN Song-mei,et al.Dynamicsimulation for a gantry machining center beam[J].Journalof Vibration and Shock,2008,27(2):168-172.(inChinese)
[6]
王勖成.有限单元法[M].北京:清华大学出版社,2003:48-258.
[7]
刘相新,孟宪颐.ANSYS基础与应用教程[M].北京:科学出版社,2006:6-98.
[8]
黄秋波,孙艳平,张徳臣.立车横梁与工作台的有限元分析计算[J].组合机床与自动化加工技术,2005(8):82-84.HUANG Qiu-bo,SUN Yan-ping,ZHANG De-chen.Finiteelement analysis on cross beam and work-table of verticallathe[J].Modular Machine Tool&AutomaticManufacturing Technique,2005(8):82-84.(inChinese)
