ZHANG Bin,YAO Bao-guo,KE Ying-lin.A novel posture alignment system for aircraft wing assembly[J].Journal of Zhejiang University:Science A,2009,10(11):1624-1630.
[2]
朱永国,黄翔,方伟,等.机身自动调姿方法及误差分析[J].南京航空航天大学学报,2011,43(2):229-234.ZHU Yong-guo,HUANG Xiang,FANG Wei,et al.Fuselage automatic position and pose adjustment method and its error analysis[J].Journal of Nanjing University of Aeronautics&Astronautics,2011,43(2):229-234.(in Chinese)
[3]
KAYA N.Machining fixture locating and clamping position optimization using genetic algorithms[J].Computers in Industry,2006,57(2):112-120.
[4]
刘楚辉,柯映林.飞机翼身对接装配中的接头测量与评价技术[J].浙江大学学报:工学版,2011,45(2):201-208.LIU Chu-hui.KE Ying-lin.Joint measuring and evaluating technology for final assembly of aircraft wing and fuselage[J].Journal of Zhejiang University:Engineering Science,2011,45(2):201-208.(in Chinese)
[5]
许国康.大型飞机自动化装配技术[J].航空学报,2008,29(3):734-740.XU Guo-kang.Automatic assembly technology for large aircraft[J].Acta Aeronautica et Astronautica Sinic,2008,29(3):734-740(in Chinese)
[6]
邹冀华,刘志存,范玉青.大型飞机部件数字化对接装配技术研究[J].计算机集成制造系统,2007,13(7):1367-1373.ZOU Ji-hua,LIU Zhi-cun,FAN Yu-qing.Large-size airplane parts digital assembly technology[J].Computer Integrated Manufacturing Systems,2007,13(7):1367-1373.(in Chinese)
[7]
邹方,薛汉杰,周万勇,等.飞机数字化柔性装配关键技术及其发展[J].航空制造技术,2006(9):30-35.ZOU Fang,XUE Han-Jie,ZHOU Wan-yong,et al.The key technologies and development of plane digital flexible assembly[J].Aeronautical Manufacturing Technology,2006(9):30-35.(in Chinese)
[8]
BI Z.Development of reconfigurable machines[J].The International Journal of Advanced Manufacturing Technology,2008,39(11):1227-1251
[9]
LEE J,HU S J,WARD A C.Workspace synthesis for flexible fixturing of stampings[J].Journal of Manufacturing Science and Engineering,1999,121:478-484.
[10]
KONG Z.CEGIAREK D.Rapid deployment of reconfigurable assembly fixtures using workspace synthesis and visibility analysis[J].CIRP Annals-Manufacturing Technology,2003,52(1):13-16.
[11]
KONG Z,CEGLAREK D.Fixture workspace synthesis for reconfigurable assembly using procrustes-based pairwise configuration optimization[J].Journal of Manufacturing Systems,2006,25(1):25-38.
[12]
蒋君侠,范子春,郭志敏,等.适用于三段大部件对接的柔性装配平台设计与优化[J].浙江大学学报:工学版,2010,44(9):1798-1805.JIANG Jun-xia,FAN Zi-chun,GUO Zhi-min,et al.Design and optimization of flexible assembly platform used for three sections joint[J].Zhejiang University:Engineering Science,2010,44(9):1798-1805.(in Chinese)
[13]
范玉青.飞机数字化装配技术综述——飞机制造的一次革命性变革[J].航空制造技术,2006(10):42-48FAN Yu-qing.The overview of airplane digital assembly technology—a revolutionary change of airplane manufacture[J].Aeronautical Manufacturing Technology,2006(10):42-48.(in Chinese)
[14]
刘楚辉,李江雄,董辉跃,等.飞机机身-机翼接头精加工条件评价技术[J].航空学报,2010,31(6):1272-1279LIU Chu-hui,LI Jiang-xiong,DONG Hui-yue,et al.Finish machining condition evaluation technology for aircraft fuselage-wing joints[J].Acta Aeronautica et Astronautica Sinic,2010,31(6):1272-1279(in Chinese)
