关天民．摆线针轮行星传动中摆线轮最佳修形量的确定方法[J]．中国机械工程，2002，13(10)：811-814 GUAN Tian-min.The optimum profile modification on cycloid disks in the cycloid gearing mechanism with small teeth differ- ence[J].Journal of Mechanical Engineering,2002,13(10) :811-814.(in Chinese)
[2]
孙玉鑫，张才富，吴凤和，等．外波式活齿减速器传动效率计算[J]．机械工程学报，1994，30(6)：35-40．SUN Yu-xin,ZHANG Cai-fu,WU Feng-he,et al.Efficiency calculation of external wave sliding-tooth reducer[J].Chinese Journal of Mechanical Engineering,1994,30(6):35-40.(in Chinese)
[3]
曲继方．活齿齿轮副转角-等移距修形法[J]．燕山大学学报，1990，14(4)：14-20．Q(?) Ji-fang.Modifying profile of gear pair of oscillating tooth drive[J].Journal of Yanshan University,1990,14(4):14- 20.(in Chinese)
董新蕊，李剑锋，王新华，等．凸轮激波的复式滚动活齿传动的结构及齿形分析[J]．中国机械工程，2006，17(16)：1661-1665．DONG Xin-rui,LI Jian-feng,WANG Xin-hua,et al.Structural and tooth profile analysis on cam profile compound teeth transmission[J].Journal of Mechanical Engineering,2006,17(16):1661-1665.(in Chinese)
[6]
曲继方．活齿传动理论[M]．北京：机械工业出版社，1993：74-82．
[7]
曲继方．活齿传动齿廓修形原理及方法研究[J]．机械工程学报，1991，27(2)：84-90．Q(?) Ji-fang.Profile modification principle and method research of movable teeth transmission[J].Chinese Journal of Mechan- ical Engineering,1991,27(2):84-90.(in Chinese)
[8]
李剑锋，曲继方．活齿齿轮副内齿轮齿形通用方程式及间隙分析[J]．东北重型机械学院学报，1992，16(1)：53-59．LI Jian-feng,Q(?) Ji-fang.Common profile equation of the annulus in sliding-teeth gear pair and its analysis of clearance[J]. Journal of Yanshan University,1992,16(1):53-59.(in Chinese)
[9]
李瑰贤，杨伟君．顾晓华．滚柱活齿传动的啮合理论及齿廓接触区数值仿真[J]．哈尔滨理工大学学报，2001．6(4)：28-31．LI Gui-xian,YANG Wei-jun,GU Xiao-hua.Study on mesh theory of roller oscillating tooth gear drive and numerical value simulation of tooth profile contact area[J].Journal of Harbin University of Science and Technology,2001,6(4):28-31.(in Chinese)
