YI B J,CHUNG G B,NA H Y.Design and experiment of a 3-DoF parallel micro-mechanism utilizing flexure hinges[J]. IEEE Tram on Robotics and Automation,2003,19(4):604-612.
[2]
ARAI F,AMANO T,FUKUDA T,et al.Mechanical micro-dissection by micro-knife using ultrasonic vibration and ultra fine touch probe sensor[C]//Proc of the 2001 IEEE Int Conf on Robotics and Automation,Seoul:IEEE Robotics and Au- tomation Society,2001:21-26.
[3]
TSAI L W,JOSHI S.Comparison study of architectures of four 3-degree-of-freedom translational parallel manipulators[C]// IEEE Int Conf on Robotics and Automation,Seoul:IEEE Robotics and Automation Society,2001:1283-1288.
[4]
LIU X J,WANG J S,GAO F,et al.On the design of 6-dof paralld micro-motion manipulators[C].IEEE/RSJ Int Conf on Intelligent Robots and System,Hawii:IEEE Robotics and Automation Society,2001.343-348.
[5]
李剑锋，吴光中，费仁元．等．3-RUU微动并联机构的尺寸型模型及性能图谱[J]．机械工程学报．2005．41(5)：38．42．LI Jian-feng，WU Guang-zhong．FEI Ren-yuan，et al．Dimensional model and performance atlas of the 3-RUU micro-too- tion paralld mechanism[J]．Chinese J of Mechanical Engineering，2005，41(5)：38-42．(in Chinese)
[6]
TANIKAWA T,ARAI T,MASUDA T,et al.Development of a micro-manipulation system having a two-fingered micro- hand[J].IEEE Trans on Robotics and Automation,1999,15(1):152-162.
[7]
YU S,NELSON B J.Microrobotic cell injection[C]//Proc of 2001 IEEE Int Conf on Robotics and Automation,Seoul,Ko- rea:IEEE Robotics and Automation Society,2001:620-625.
[8]
PORTMAN V T,SANDLER B Z,ZAHAVI E.Rigid parallel platform for precision 3-D micro-manipulation:theory and de- sign application[J].IEEE Tram on Robotics and Automation,2000,16(3):629-643.
[9]
管长乐，费仁元，刘德忠，等．压电陶瓷驱动器开环控制模型的建立[J]．机械科学与技术，2005(6)：22-25．GUAN Chang-Je，FEI Ren-yuan，LIU De-zhong，et al．Building of open-1cop control model of piezoelectric ceramic actuator [J]．Mechanical scienee and Teehnology，2005(6)：22-25．(in Chinese)
