ISO.ISO 1328—2:1997 cylindrical gears-ISO system of accuracy-Part2:Definitions and allowable values of deviations rele- vant to radial composite deviations and run-out information[S].Geneva:ISO,1997:1-11.
[9]
陈向伟，王龙山，刘庆民．基于CCD的齿轮参数测量系统的研究[J]．工具技术，2004，38(5)：44-46．CHEN Xiang-wei,WANG Long-shan,LIU Qing-min.Research on measuring system for gear parameters based on CCD [J].Tool Engineering,2004,38(5):44-46.(in Chinese)
[10]
YOUNES M A,KHAILAND A M,DAMIR M W.Automatic measurement of spur-gear dimensions using laser light[J]. Part I:measurement of tooth thickness and pitch.Optical Engineering,2005,44(8):1-13.
[11]
毛建东．小模数齿轮齿形误差的CCD测量方法研究[J]．传感器与微系统，2006，25(11)：25-28．MAO Jian-dong.Gear involute-error measurement of the small module gear based on CCD[J].Transducer and Microsystem Technologies,2006,25(11):25-28.(in Chinese)
[12]
廖世鹏．廖俊必．直齿渐开线小模数齿轮(m＜1．0)齿形误差的三坐标图像测量法[J]．四川大学学报(工程科学版)，2007，39(4)：164-168．LIAO Shi-peng,LIAO Jun-bi.Measuring tooth error of involute spur gear by CCD camera on CMM[J].Journal of Sichuan University(Engineering Science Edition),2007,39(4):164-168.(in Chinese)
MUNRO R G.Effect of geometrical errors in the transmission of motion between gears[J].Proceedings of Conference on Gearing,1970(3):79-84.
[15]
KLEISS R E.A practical guide for molding better plastic geared transmissions [J].Gear Technology,2005(5):24-29.
[16]
KUROKAWA S,ARIURA Y.Development of a grating disk of a micro rotary eneoder for measurement of meshing accura- cy of micro gears[C]//Proceedings of ISMTII 2007.Sendai,Japan:JSPE,2007:24-27,265-268.
[17]
RUDOLF O.History of gear measuring machines and traceability 1900—2006[J].Gear Product News,2006(10):20-25.
[18]
小岛秀芳，小笠原真智．精密工学会志[M]．东京：精密工学会志编辑委员会，2003：47-60．
[19]
冯刚，谢华锟，丁华，等．微小齿轮测量技术的现状与发展[J]．工具技术，2007，41(4)：3-6．FENG Gang,XIE Hua-kun,DING Hua,et al.Present state and development of measuring technology for fine-pitch gear [J].Tool Engineering,2007,41(4):3-6.(in Chinese)
[20]
MIKOLEIZIG G.CNC gear inspection technology and new software solutions adapted to individual industry needs[C]// Laser Metrulogy and Machine PerformanceⅣ.South Ampton,UK:WIT Press,1999:237-251.
[21]
陈向伟，王龙山．图像测量技术在微型齿轮测量中的应用[J]．半导体光电，2004(6)：465-469．CHEN Xiang-wei,WANG Long-sham Application of imagemeasurement technique in microgearmeasurement[J].Semicon- ductor Electronics,2004(6):465-469.(in Chinese)
[22]
YU Lian-dong,BRAND U.Microsystem metrology-the PTB special CMM[C]//International Symposium on Precision Me- chanical Measurements(ISPMM'2002).Hefei:Harbin Institute Technology Publishers,2002:12-16.
[23]
石照耀，韦志会．精密测头技术的演变与发展趋势[J]．工具技术，2007(2)：3-9．SHI Zhao-yao,WEI Zhi-hui.Evolution and sone trends in precision probe technology[J].Tool Engineering,2007(2):3- 9.(in Chinese)
[24]
张兆龙，黄尚廉，黄潼年．齿轮误差单面啮合运动测试技术的展望[J]．现代计量技术，1995(6)：2-7．ZHANG Zhao-long,HUANG Shang-lian,HUANG Tong-nian.Review of gear measurement using single flank meshing movement method[J].Modem Measurement and Test,1995(6):2-7.(in Chinese)
[25]
柏永新．多功能CD320G2D型单啮仪[J]．西安理工大学学报，1999，15(3)：7-13．BAI Yong-xin.The multifunetional single flank mesh gear tester of model CD320GD[J].Journal of Xi'an University of Technology,1999,15(3):7-13.(in Chinese)
