李向荣,姜庆强,付经伦.柴油机组合进气道布置位置优化研究[J].车用发动机,2005,158(4):55-58.LI Xiang-rong,JIANG Qing-qiang,FU Jing-lun.Position optimization of the combination intake port of diesel engine[J].Vehicle Engine,2005,158(4):55-58.(in Chinese)
[2]
李丽婷.可调进气涡流的数值仿真和试验研究[D].北京:北京理工大学机械与车辆工程学院,2005.LI Li-ting.Investigation on simulation and test of variable intake swirl in diesel engine[D].Beijing:School of Mechanicaland Vehicular Engineering,Beijing Institute of Technology,2005.(in Chinese)
[3]
董元坤.柴油机电控可调进气涡流试验研究[D].北京:北京理工大学机械与车辆工程学院,2006.DONG Yuan-kun.Investigation on test of electric controlled variable intake swirl in diesel engine[D].Beijing:School ofMechanical and Vehicular Engineering,Beijing Institute of Technology,2006.(in Chinese)
[4]
李向荣,张薇,杜巍.柴油机可调涡流进气道设计与试验[J].农业机械学报,2007,38(10):10-14.LI Xiang-rong,ZHANG Wei,DU Wei.Development of intake ports with variable swirl system in a diesel engine[J].Transactions of the Chinese Society for Agriculture Machinery,2007,38(10):10-14.(in Chinese)
[5]
杜巍.双进气道柴油机可调进气涡流形成机理及应用研究[D].北京:北京理工大学机械与车辆工程学院,2006.DU Wei.Investigation on mechanism and application of variable intake swirl in double-intake-port diesel engine[D].Beijing:School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,2006.(in Chinese)
[6]
杜巍,刘福水,李向荣.双进气道柴油机可调进气涡流形成机理的研究[J].内燃机工程,2008,29(2):56-61.DU Wei,LIU Fu-shui,LI Xiang-rong.Study on formation mechanism of variable intake swirl in diesel engine with twointake ports[J].Chinese Internal Combustion Engine Engineering,2008,29(2):56-61.(in Chinese)
[7]
李向荣,张成国,董元坤,等.柴油机可调进气涡流系统的研制[J].车用发动机,2006,166(6):54-57.LI Xiang-rong,ZHANG Cheng-guo,DONG Yuan-kun,et al.The development of variable intake swirl system for DI dieselengine[J].Vehicle Engine,2006,166(6):54-57.(in Chinese)
[8]
李向荣,董元坤,李丽婷.柴油机进气涡流调节形式及阀板尺寸对进气特性的影响[J].柴油机,2006,28(3):18-20.LI Xiang-rong,DONG Yuan-kun,LI Li-ting.The effect of intake swirl adjusting method and the dimension of valve plateon the performance of intake[J].Diesel Engine,2006,28(3):18-20.(in Chinese)
