张晓玲,唐锡宽.转轴扭角及扭振测试技术研究[J].清华大学学报:自然科学版,1997,37(8):83-86.ZHANG Xiao-ling,TANG Xi-kuan.Research on measuring technique for torsional angle and torsional vibration of rotatingshaft[J].Journal of Tsinghua University:Science and Technology,1997,37(8):83-86.(in Chinese)
[2]
王仪明,蔡吉飞,赵吉斌.高速胶印机关键技术研究现状及进展[J].中国机械工程,2007,18(10):1255-1259.WANG Yi-ming,CAI Ji-fei,ZHAO Ji-bin.Research and development of key technologies for high speed offset presses[J].China Mechanical Engineering,2007,18(10):1255-1259.(in Chinese)
[3]
杨家华,管华.印刷机振动的测试与分析[J].北京工业大学学报,2004,30(1):35-38.YANG Jia-hua,GUAN Hua.Test and analysis of the vibration of printing press[J].Journal of Beijing University ofTechnology,2004,30(1):35-38.(in Chinese)
[4]
BARTLETT H,WHALLEY R.The rotor dynamics of reeling machinery[J].Applied Mathematical Mod-elling,1999,23(10):757-777.
[5]
张晓玲,沈韶华,谷文港.基于虚拟仪器的转子扭振特性测试系统研究[J].机械设计与研究,2007,23(5):77-79.ZHANG Xiao-ling,SHEN Shao-hua,GU Wen-gang.The study of shafts torsional vibration test system based on the virtualinstrument technology[J].Machine Design&Research,2007,23(5):77-79.(in Chinese)
[6]
陈勇.汽轮发电机组轴系扭转振动测试[J].南京林业大学学报:自然科学版,2002,26(2):41-43.CHEN Yong.Torsional vibration test of steam turbine generator rotor system[J].Journal of Nanjing Forestry University:Natural Sciences,2002,26(2):41-43.(in Chinese)
[7]
向玲,唐贵基,杜永祚,等.汽轮发电机组扭振测试系统的研究[J].振动、测试与诊断,2000,20(2):134-138.XIANG Ling,TANG Gui-ji,DU Yong-zuo,et al.Development of torsional vibration measuring system for turbinegenerating set[J].Journal of Vibration,Measurement&Diagnosis,2000,20(2):134-138.(in Chinese)
[8]
胡海刚,冯志敏,蒲龙云.基于虚拟仪器的扭振检测仪设计[J].机床与液压,2003(6):289-291.HU Hai-gang,FENG Zhi-min,PU Long-yun.Design of torsional vibration detector based on virtual instrument[J].Journalof Machine Tool&Hydraulics,2003(6):289-291.(in Chinese)
[9]
张晓玲,唐锡宽.扭振测试误差及其校正方法研究[J].清华大学学报:自然科学版,1997,37(11):9-12.ZHANG Xiao-ling,TANG Xi-kuan.Analysis of torsional vibration measuring errors and their correct method[J].Journal ofTsinghua University:Science and Technology,1997,37(11):9-12.(in Chinese)
[10]
童进,吴昭同,严拱标.旋转机械信号采集中的一种脉冲剔除方法[J].振动测试诊断,2000,20(3):216-217.TONG Jin,WU Zhao-tong,YAN Gong-biao.Rejection of pulsed noise in the monitoring signal of rotating machinery[J].Journal of Vibration,Measurement&Diagnosis,2000,20(3):216-217.(in Chinese)
[11]
闰兵,张吉喜,董大伟.一种滤除内燃机曲轴瞬时转速信号畸点的方法[J].内燃机工程,2001,22(1):7-10.YAN Bing,ZHANG Ji-xi,DONG Da-wei.A method for filtering out distorted points from the crankshaft instantaneousrotation speed signal of engines[J].Chinese Internal Combustion Engine Engineering,2001,22(1):7-10.(in Chinese)
