LEE Dai Gil,SUH Jung Do,KIM Hak Sung,et al.Design and manufacture of composite high speed machinetool structures[J].Composites Science and Technology,2004,64:1523-1530.
[4]
李德葆,陆秋海.实验模态分析及其应用[M].北京:科学出版社,2001:119-143.
[5]
左鹤声,彭玉莺.振动试验模态分析[M].北京:中国铁道出版社,1995:198-201.
[6]
张广鹏,史文浩,黄玉美,等.机床整机动态特性的预测解析建模方法[J].上海交通大学学报:自然科学版,2001,35(12):1834-1837.ZHANG Guang-peng,SHI Wen-hao,HUANG Yu-mei,etal.Modeling and analysis method of dynamicalcharacteristics for awhole machinetool structure[J].Journal of Shang Hai Jiao Tong University,2001,35(12):1834-1837.(in Chinese)
[7]
周德廉,陈新,孙庆鸿.高精度内圆磨床整机动力学建模及优化设计[J].东南大学学报,2001,31(2):35-38.ZHOU De-lian,CHEN Xin,SUN Qing-hong.Dynamicmodeling and optimal design for high precise internalgrinder[J].Journal of Southeast University:NaturalScience Editon,2001,31(2):35-38.(in Chinese)
[8]
张飞.大型龙门铣床关键件的动态测试与分析[D].北京:北京工业大学机械工程与应用电子技术学院,2009.ZHANG Fei.Dynamic test and analysis of criticalcomponent of large-scale milling machine[D].Beijing:College of Mechanical Engineering and Applied ElectronicsTechnology,Beijing University of Technology,2009.(inChinese)
[9]
刘晓平,徐燕申,彭泽民,等.模态分析和有限元法结合识别机械结构结合面动力学参数[J].应用力学学报,1993,10(4):108-113.LIU Xiao-ping,XU Yan-shen,PENG Ze-min,et al.Identification the dynamic parameters of structural joint viaexperimental and modal analysis[J].Chinese Journal ofApplied Mechanics,1993,10(4):108-113.(inChinese)
[10]
倪向阳.龙门加工中心结构动力学建模与优化设计研究[D].南京:东南大学机械工程学院,2005.NI Xiang-yang.Dynamics modeling and optimizationdesign of a gantry style machining center[D].Nanjing:School of Mechanical Engineering,Southeast University,2005.(in Chinese)
[11]
杜奕.MSY7115平面磨床的实验模态分析及动特性修改[D].昆明:昆明理工大学机电工程学院,2002.DU Yi.The experimental modal analysis method’sapplications in surface grinder type MSY7115 and itsdynamical modification[D].Kunming:School ofMechanical and Electrical Engineering,KunmingUniversity of Science and Technology,2002.(in Chinese)
