IBRAHIM R A,PETTIT C L.Uncertainties and dynamicproblems of bolted joints and other fasteners[J].Journalof Sound and Vibration,2005,279(3/5):857-936.
[2]
GAUL L,NITSCHE R.The role of friction in mechanicaljoints[J].Applied Mechanics Reviews,2001,54(2):93-106.
[3]
田红亮.机械结构固定结合部虚拟材料的动力学建模[D].武汉:华中科技大学机械科学与工程学院,2011.TIAN Hong-liang.Dynamic modeling on fixed jointinterface virtual material in mechanical structure[D].Wuhan:School of Mechanical Science and Engineering,Huazhong University of Science and Technology,2011.(in Chinese)
[4]
REN Y,BEARDS C F.Identification of‘effective’linearjoints using coupling and joint identification techniques[J].Journal of Vibration and Acoustics,1998,120(2):331-338.
[5]
WANG J H,CHUANG S C.Reducing errors in theidentification of structural joint parameters using errorfunctions[J].Journal of Sound and Vibration,2004,273(1/2):295-316.
[6]
TSAI J S,CHOU Y F.The identification of dynamiccharacteristics of a single bolt joint[J].Journal of Soundand Vibration,1988,125(3):487-502.
[7]
REN Y,BEARDS C F.Identification of joint properties ofa structure using FRF data[J].Journal of Sound andVibration,1995,186(4):567-587.
[8]
REN Y,BEARDS C F.On substructure synthesis withFRF data[J].Journal of Sound and Vibration,1995,185(5):845-866.
[9]
YANG T,FAN S H,LIN C S.Joint stiffness identificationusing FRF measurements[J].Computers and Structures,2003,81(28/29):2549-2556.
[10]
CˇELICˇD,BOLTEAR M.Identification of the dynamicproperties of joints using frequency-response functions[J].Journal of Sound and Vibration,2008,317(1/2):158-174.
[11]
CˇELICˇD,BOLTEZˇAR M.The influence of thecoordinate reduction on the identification of the jointdynamic properties[J].Mechanical Systems and SignalProcessing,2009,23(4):1260-1271.
[12]
HWANG H Y.Identification techniques of structureconnection parameters using frequency response functions[J].Journal of Sound and Vibration,1998,212(3):469-479.
[13]
李玲,蔡力钢,郭铁能,等.子结构综合法辨识结合部的特征参数[J].振动.测试与诊断,2011,31(4):439-444.LI Ling,CAI Li-gang,GUO Tie-neng,et al.Identification of characteristic parameters of joints bysubstructure synthesis method[J].Journal of Vibration,Measurement&Diagnosis,2011,31(4):439-444.(inChinese)
[14]
蔡力钢,李玲,郭铁能,等.基于不完备频响函数辨识结合部参数的研究[J].振动工程学报,2011,24(4):345-350.CAI Li-gang,LI Ling,GUO Tie-neng,et al.Identifyingmechanical joint dynamic parameters based on incompletefrequency response functions[J].Journal of VibrationEngineering,2011,24(4):345-350.(in Chinese)
[15]
郭铁能,李玲,蔡力钢,等.基于频响函数辨识机械结合部动态参数的研究[J].振动与冲击,2011,30(5):69-72.GUO Tie-neng,LI Ling,CAI Li-gang,et al.Identifyingmechanical joint dynamic parameters based on measuredfrequency response functions[J].Journal of Vibrationand Shock,2011,30(5):69-72.(in Chinese)
[16]
李玲,蔡力钢,郭铁能,等.机械结合部动态刚度辨识与实验研究[J].振动工程学报,2012,25(5):487-496.LI Ling,CAI Li-gang,GUO Tie-neng,et al.Identification and experimental research on dynamicstiffness of mechanical joints[J].Journal of VibrationEngineering,2012,25(5):487-496.(in Chinese)
[17]
蔡力钢,李玲,郭铁能,等.基于力状态映射法辨识非线性结合部动态参数的研究[J].机械工程学报,2011,47(7):65-72.CAI Li-gang,LI Ling,GUO Tie-neng,et al.Identification of nonlinear joint parameters with force-statemapping method[J].Journal of Mechanical Engineering,2011,47(7):65-72.(in Chinese)
