黄玉美,傅卫平,佟浚贤.获取结合面实用切向阻尼参数的方法[J].西安理工大学学报,1996,12(1):1-5.HUANG Yu-mei,FU Wei-ping,TONG Jun-xian.A method of acquiring applied tangential damping parameters of joint surfaces[J].Journal of Xi’an University of Technology,1996,12(1):1-5.(in Chinese)
廖伯瑜,廖永宜.机床结构建模的研究与应用[J].振动工程学报,1990,3(1):83-89.LIAO Bo-yu,LIAO Yong-yi.Approach to modeling the dynamic characteristics of machine tool structure with applications[J].Journal of Vibration Engineering,1990,3(1):83-89.(in Chinese)
[4]
CUI Zhi-qin,JING Yin-Ping.Application of virtual material in joint surface of complex assembled structures[J].Journal of CentralSouth University of Technology:English Edition,2008,15(2):421-424.
[5]
崔志琴,杨瑞峰.复杂机械结构的参数化建模及模态分析[J].机械工程学报,2008,44(2):234-237.CUI Zhi-qin,YANG Rui-feng.Parametric modeling and modal analysis for the complex mechanical structure[J].Chinese Journal of MechanicalEngineering,2008,44(2):234-237.(in Chinese)
[6]
张杰,童忠钫.机床固定结合面动力学建模问题[J].振动与冲击,1994(3):15-22.ZHANG Jie,TONG Zhong-fang.The problem of dynamic modeling of bolted joints in machine tool[J].Journal of Vibration and Shock,1994(3):15-22.(in Chinese)
[7]
林有希,高诚辉,高济众.大型机床动态特性的整机有限元分析[J].福州大学学报:自然科学版,2003,31(1):69-72.LIN You-xi,GAO Cheng-hui,GAO Ji-zhong.Dynamic finite element analysis of heavy-duty machine tool[J].Journal of Fuzhou University:Natural Science,2003,31(1):69-72.(in Chinese)
[8]
毛宽民,叶俊,李斌,等.基于PATRAN的机床快速动力学建模系统的开发[J].中国机械工程,2008,19(10):1144-1148.MAO Kuan-min,YE Jun,LI Bin,et al.Development of rapid dynamics modeling system of machine tool based on PATRAN[J].China Mechanical Engineering,2008,19(10):1144-1148.(in Chinese)
[9]
郭显平.机床固定结合部动力学建模及影响因素研究[D].武汉:华中科技大学机械科学与工程学院,2008.GUO Xian-ping.Research on dynamic modeling and the factors of fixed joints in machine tools[D].Wuhan:College of Mechanical Science and Engineering,Huazhong University of Science and Technology,2008.(in Chinese)
[10]
MAO K M,LI B,WU J,et al.Stiffness influential factors-based dynamic modeling and its parameter identification method of fixed joints in machine tools[J].International Journal of Machine Tools&Manufacture,2010,50(2):156-164.
[11]
吴文镜,刘强.机床动力学建模的拓展传递矩阵法[J].机械工程学报,2010,46(21):69-75.WU Wen-jing,LIU Qiang.Extended transfer matrix method for dynamic modeling of machine tools[J].Chinese Journal of Mechanical Engineering,2010,46(21):69-75.(in Chinese)
[12]
姚延凤,刘强,吴文镜.基于刚柔-机电耦合的机床直线电机进给系统动态性能仿真研究[J].振动与冲击,2011,30(1):191-196.YAO Yan-feng,LIU Qiang,WU Wen-jing.Dynamic simulation of a linear motor feed drive system based on rigid-flexible&electrical-mechanical coupling[J].Journal of Vibration and Shock,2011,30(1):191-196.(in Chinese)
[13]
许丹,刘强,袁松梅,等.一种龙门式加工中心横梁的动力学仿真研究[J].振动与冲击,2008,27(2):168-171.XU Dan,LIU Qiang,YUAN Song-mei,et al.Dynamic simulation for a gantry machining center beam[J].Journal of Vibration and Shock,2008,27(2):168-171.(in Chinese)
[14]
WILLIAMS J G,ANLEY R E,NASH D H,et al.Analysis of externally loaded bolted joints:analytical,computational and experimental study[J].International Journal of Pressure Vessels and Piping,2009,86:420-427.
[15]
WILEMAN J,CHOUDHURY M,GREEN I.Com-putation of member stiffness in bolted connections[J].ASME Journal of Mechanical Design,1991,113:432-437.
[16]
MOTOSH N.Determination of joint stiffness in bolted connections[J].ASME Journal of Industrial Design,1976,98(3):858-861.
[17]
NASSAR S A,ABBOUD A.An improved stiffness model for bolted joints journal of mechanical design[J].Transactions of the ASME,2009,12(131):1210011-12100111.
[18]
张学良.机械结合面动态特性及应用[M].北京:中国科学技术出版社,2002:1-2.
[19]
赵宏林,丁庆新,曾鸣,等.机床结合部特性的理论解析及应用[J].机械工程学报,2008,44(12):208-214.ZHAO Hong-lin,DING Qing-xin,ZENG Ming,et al.Theoretic analysis on and application of behaviors ofmachine tool joints[J].Chinese Journal of MechanicalEngineering,2008,44(12):208-214.(in Chinese)
