金云学,郭宇航.原位TiC颗粒增强铁基复合材料的磨粒磨损性能研究[J].江苏科技大学学报:自然科学版,2008,22(5):22-27.JIN Yun-xue,GUO Yu-hang.Research on abrasive wearperformance of in situ TiC particle reinforced ferrous matrixcomposites[J].Journal of Jiangsu University of Scienceand Technology:Natur Science Edition,2008,22(5):22-27.(in Chinese)
[2]
BERNS H,WEWERS B.Development of an abrasionresistant steel composite with in situ TiC particles[J].Wear,2001,251:1386-1395.
[3]
孙建荣,孙扬善,闵学刚.TiCP/3Cr13复合材料显微组织及耐磨性的研究[J].铸造,2001,50(1):25-28.SUN Jian-rong,SUN Yang-shan,MIN Xue-gang.A studyon microstructure and wear-resisting properties of casting insitu TiCp/3Cr13 composites[J].Foundry,2001,50(1):25-28.(in Chinese)
[4]
冯可芹,杨屹,沈保罗,等.大热流通量条件下原位合成Fe-TiC复合材料的研究[J].钢铁钒钛,2003,24(3):22-25.FENG Ke-qin,YANG Yi,SHEN Bao-luo,et al.In situsynthesis of Fe-TiC comoposites under great thermal flux[J].Iron Steel Vanadium Titanium,2003,24(3):22-25.(in Chinese)
[5]
张元彬,任登义.堆焊层中钛的碳化物[J].焊接学报,2002,23(5):38-40.ZHANG Yuan-bin,REN Deng-yi.Study on carbides insurfacing layer[J].Transaction of the China WeldingInstitution,2002,23(5):38-40.(in Chinese)
[6]
MODI O P,PRASAD B K,JHA A K,et al.Effects ofmaterial composition and microstructural features on drysliding wear behaviour of Fe-TiC composite and a cobalt-based satellite[J].Tribology Letters,2004,17(2):129-137.
[7]
邹增大,王新洪,杨尚磊,等.TiC-VC耐磨堆焊焊条[J].材料科学与工艺,2001,9(4):397-401.ZOU Zeng-da,WANG Xin-hong,YANG Shang-lei,et al.Development of TiC-VC wear resistant surfacing electrode[J].Materials Science and Technology,2001,9(4):397-401.(in Chinese)
[8]
严有为,魏伯康,傅正义,等.TiC颗粒含量及尺寸对原位TiC/Fe复合材料耐磨性的影响[J].摩擦学学报,1999,19(3):193-197.YAN You-wei,WEI Bo-kang,FU Zheng-yi,et al.Effectof the volume fraction and size of TiC particles on theabrasive wear resistance of insitu TiCp/Fe composites[J].Tribology,1999,19(3):193-197.(in Chinese)
[9]
汤文博,郭云刚,魏建军,等.NbC-TiC耐磨高抗裂堆焊焊条的优化设计[J].表面技术,2008,37(6):36-38.TANG Wen-bo,GUO Yun-gang,WEI Jian-jun,et al.Optimum design of NbC-TiC surefacing electrode with anti-wearing and anti-cracking[J].Surface Technology,2008,37(6):36-38.(in Chinese)
[10]
王智慧,俞长丽,贺定勇.焊后热处理对Fe-Cr-C耐磨堆焊合金组织和磨损性能的影响[J].材料热处理学报,2009,30(4):77-80.WANG Zhi-hui,YU Chang-li,HE Ding-yong.Effect ofpost heat treatment on microstructure and abrasive wearproperty of Fe-Cr-C hardfacing alloy[J].Transactions ofMaterials and Heat Treatment,2009,30(4):77-80.(inChinese)
