廖鲁.大型齿轮检测技术与方案[J].金属加工,2011(9):26-27.LIAO Lu.Measurement technology and scheme of largegear[J].Metal Forming,2011(9):26-27.(in Chinese)
[4]
SCHWENKE H,FRANKE M,HANNAFORD J.Errormapping of CMMs and machine tools by a single trackinginterferometer[J].CIRP Annals-Manufacturing Technology,2005,54(1):475-478.
[5]
HARTIG F,KECK C,KNIEL K,et al.Improvement ofmeasurement accuracy by combined evaluation of CMM andtracking interferometer measurements[C]∥Proceedings ofXVII IMEKO World Congress.Dubrovnik,Croatia:Metrology in the 3rd Millennium,2003:1172-1175.
[6]
AGGOGERIA F,BARBATOB G,BARINIB E M,et al.Measurement uncertainty assessment of coordinatemeasuring machines by simulation and plannedexperimentation[J].CIRP Journal of ManufacturingScience and Technology,2011,4(1):51-56.
[7]
石照耀,张宇,张白.三坐标机测量齿轮齿廓的不确定度评价[J].光学精密工程,2012,20(4):302-307.SHI Zhao-yao,ZHANG Yu,ZHANG Bai.Uncertaintyevaluation of CMM measurement for gear profile[J].Optics and Precision Engineering,2012,20(4):302-307.(in Chinese)
[8]
石照耀,张斌,林家春,等.坐标测量技术半世纪:演变与趋势[J].北京工业大学学报,2011,37(5):648-656.SHI Zhao-yao,ZHANG Bin,LIN Jia-chun,et al.Halfcentury of coordinate metrology technology:evolution andtrends[J].Journal of Beijing University of Technology,2011,37(5):648-656.(in Chinese)
宋丹,刘金国,吴国栋.蒙特卡罗法的测绘相机标定误差分析[J].光电子技术,2008,28(3):177-183.SONG Dan,LIU Jin-guo,WU Guo-dong.Error analysis ofmapping camera calibration based on monte carlo method[J].Optoelectronic Technology,2008,28(3):177-183.(in Chinese)
