李龙,张心金,刘会云,等.不锈钢复合板的生产技术及工业应用[J].轧钢,2013,30(3):48-52.LI Long,ZHANG Xin-jin,LIU Hui-yun,et al.Production technology and application of stainless steel clad plate[J].Steel Rolling,2013,30(3):48-52.(in Chinese)
[2]
李宝绵,许光明,崔建忠.对称复合板冷轧过程的上限法分析[J].塑性工程学报,2003,10(3):58-61.LI Bao-mian,XU Guang-ming,CUI Jian-zhong.An upper-bound analysis of cold symmetrical sandwich rolling[J].Journal of Plasticity Engineering,2003,10(3):58-61.(in Chinese)
[3]
李玉刚,李河宗,于九明.双金属复合板轧制力的工程法计算[J].天津冶金,2000(4):35-37.LI Yu-gang,LI He-zong,YU Jiu-ming.Calculation of rolling force for bimetals by slab method[J].Tianjing Metallurgy,2000(4):35-37.(in Chinese)
[4]
YEONG Maw Hwang,HUNG Hsiou Hsu,YUH Lin Hwang.Analytical and experimental study on bonding behavior at the roll gap during complex rolling of sandwich sheets[J].International Journal of Mechanical Sciences,2000,42(12):2417-2437.
[5]
CHAUDHARI G P,ACOFF V.Cold roll bonding of multilayered bi-metal laminate composites[J].Composites Science and Technology,2009,69(10):1667-1675.
[6]
孙铁凯,赵永和.双金属复合板轧制力的计算[J].钢铁,1995,30(6):36-38.SUN Tie-kai,ZHAO Yong-he.Calculation of rolling force for bimetals[J].Iron and Steel,1995,30(6):36-38.(in Chinese)
[7]
杨福亮,李玉贵,范飞.薄板轧制力的研究与模拟分析[J].中国重型装备,2011(3):27-29.YANG Fu-liang,LI Yu-gui,FAN Fei.Research and simulation analysis of rolling force for thin plate[J].China Heavy Equipment,2011(3):27-29.(in Chinese)
[8]
TZOU G Y,TIEU A K,HUANG M N,et al.Analytical approach to the cold-and-hot bond rolling of sandwich sheet with outer hard and inner soft layers[J].Journal of Materials Processing Technology,2002,664:125-126.
[9]
TZOU G Y,HUANG M N.Analytical modified model of the cold bond rolling of unbounded double-layers sheet considering hybrid friction[J].Journal of Materials Processing Technology,2003,140(1/2/3):622-627.
[10]
刘志亮,张文志.不锈钢复合板冷轧过程有限元模拟[J].机械科学与技术,2007(12):78-81.LIU Zhi-liang,ZHANG Wen-zhi.Finite element simulation of the cool rolling of stainless clad strips[J].Mechanical Science and Technology for Aerospace Engineering,2007(12):78-81.(in Chinese)
[11]
夏中山,郑申白.高精密板带轧制力计算模型研究[J].河北冶金,2007(2):13-15.XIA Zhong-shan,ZHENG Shen-bai.Research about calculating model for rolling load in production of highprecision sheet and strip[J].Hebei Metallurgy,2007(2):13-15.(in Chinese)
[12]
ZHANG X P,YANG T H,CASTAGNE S,et al.Proposal of bond criterion for hot roll bonding and its application[J].Materials and Design,2011,32(4):2239-2245.
