全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

螺旋驱动掘进机几个螺旋参数的研究

Keywords: 螺旋驱动行走,牙型角,牙底距,齿高

Full-Text   Cite this paper   Add to My Lib

Abstract:

以粉质黏土中螺旋驱动掘进机的驱动部件和土体的相互作用为研究背景,选取影响螺旋拉力的3个不同参数进行模型试验.分析发现,螺旋杆件结构参数对其提供拉力大小的影响主次关系顺序为:压底距>牙型角>齿高;并按照提供拉力最大的情况,得出一组最佳螺旋结构特征参数组合,最后经数据回归分析,得出拉力与螺旋结构各参数间的回归方程.

References

[1]  王梦恕.21世纪是隧道及地下空间大发展的年代[J].隧道建设,2000(1):7-10.WANG Meng-shu.Twenty-first century is the time of tunnel and underground space development age[J].Tunnel Construction,2000(1):7-10.(in Chinese)
[2]  周文波.盾构法隧道施工技术及应用[M].北京:中国建筑工业出版社,2004:11-15.
[3]  马保松,STEIN D,蒋国盛.顶管和微型隧道技术[M].北京:人民交通出版社,2004:198-220.
[4]  卢清国.长距离隧道自驱动前行的可行性[C]∥第三届中日盾构隧道技术交流会论文集.成都:西南交通大学出版社,2005:6-21.LU Qing-guo.The feasibility of self driving along the long distance tunnel[C]∥The third China Japan Shield Tunneling Technology Exchange Conference.Chengdu:Southwest Jiaotong University Press,2005:6-21.(in Chinese)
[5]  吴光林,严谨.船用螺旋桨理论研究的发展与方向[J].中国船舰研究,2009(4):8-12.WU Guang-lin,YAN Jin.Development and methods on theoretical research of marine propellers[J].Chinese Journal of Ship Research,2009(4):8-12.(in Chinese)
[6]  黄春霞.土力学[M].南京:东南大学出版社,2012:9-50.
[7]  杜安平.螺旋钻杆设计参数的计算方法与实验验证[J].煤炭工程师,1995,5(6):5-20.DU An-ping.With the experimental design and calculation method of parameters of spiral drill pipe verification[J].Coal Engineer,1995,5(6):5-20.
[8]  卢清国,田永超.螺旋类型、长度及外径对旋牵拉结构拉力影响的试验研究[J].低温建筑技术,2013,8(6):1-5.LU Qing-guo,TIAN Yong-chao.Experimental study of spiral type,length and diameter of traction force influence on the spin structure[J].Low Temperature Construction Technology,2013,8(6):1-5.(in Chinese)
[9]  上海市科学技术交流站.正交试验设计法[M].上海:上海人民出版社,1975:3-50.
[10]  杨俊杰.相似理论与结构模型试验[M].武汉:武汉理工大学出版社,2005:21-48.
[11]  鲁宝安,陈友伟.机械基础知识与技术[M].武汉:武汉理工大学出版社,2010:8-90.
[12]  王文隆,王修斌.地面力学中土壤参数的选定及其测量方法和仪器[J].农业机械学报,1983,8(4):1-9.WANG Wen-long,WANG Xiu-bin.The selected parameters of soil mechanics in the ground and its measuring method and instrument[J].Journal of Agricultural Machinery,1983,8(4):1-9.(in Chiense)
[13]  胡均平,徐圆,郭勇,等.螺旋转成层土拔钻力的研究[J].中南林业科技大学学报,2010,7(6):9-42.HU Jun-ping,XU Yuan,GUO Yong,et al.Study on drilling force pulling screw into the layer of soil[J]Journal of Central South University of Forestry&Technology,2010,7(6):9-42.(in Chinese)
[14]  盛骤.概率论与数理统计[M].北京:高等教育出版社,2009:6-90.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133