全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...

超跨距横梁Z向导轨面起拱曲线设计与优化

Keywords: 超跨距横梁,变形曲线,起拱曲线

Full-Text   Cite this paper   Add to My Lib

Abstract:

针对数控重型龙门铣床超跨距横梁由于跨度大、质量大,安装完毕后由于重力和溜板滑枕作用力会向下弯曲,其中Z向导轨面的最大挠度可达到1mm,严重影响加工精度的问题,采用对导轨面预起拱的方法来补偿横梁变形对加工精度的影响.首先,采用有限元方法分析超跨距横梁实际工作时的变形,并采用多项式对溜板滑枕在各位置时横梁Z向导轨面的变形进行拟合;充分考虑由于溜板跨度带来的2条变形曲线对起拱曲线的影响,提出了基于这2条变形曲线进行起拱曲线设计和优化的方法.分析以往各种起拱曲线对刀尖点变形的影响,结果表明:所提出的优化方法较以往的起拱方法更能有效降低横梁变形对机床精度的影响.

References

[1]  张伯鹏,张年松.机床横梁重力变位的自演进补偿[J].清华大学学报:自然科学版,2006,46(2):191-193.ZHANG Bo-peng,ZHANG Nian-song.Self-evolutionary compensation of machine tool crossbeam deformation induced by gravity[J].Journal of Tsinghua University:Science and Technology,2006,46(2):191-193.(in Chinese)
[2]  罗传林,李锻能.龙门式机床横梁的结构设计研究[J].机电工程技术,2006,35(3):45-47.LUO Chuan-lin,LI Duan-neng.Design and research of the structural of cross-rail in the planer type machines[J].Mechanical&Electrical Engineering Technology,2006,35(3):45-47.(in Chinese)
[3]  谢黎明,李大明,沈浩,等.基于有限元分析的现场铣床横梁结构优化[J].组合机床与自动化加工技术,2008,9:73-75.XIE Li-ming,LI Da-ming,SHEN Hao,et al.Optimum design of scene milling machine beam based on finite element analysis[J].Modular Machine Tool&Automatic Manufacturing Technique,2008,9:73-75.(in Chinese)
[4]  ZATARAIN M,LEJARDI E,EGANA F.Modular synthesis of machine tools[J].Annals of the CIRP,1998,47(1):333-336.
[5]  郭铁能,席方剑,蔡力钢,等.重载大跨距横梁承载曲线分析与实验研究[J].北京工业大学学报,2011,37(8):1129-1135.GUO Tie-neng,XI Fang-jian,CAI Li-gang,et al.Load curve analysis and experimental study of long span and heavy load crossbeam[J].Journal of Beijing University of Technology,2011,37(8):1129-1135.(in Chinese)
[6]  郭铁能,崔亚辉,蔡力钢,等.装卡方式对超跨距横梁Z向导轨面起拱曲线加工的影响[J].北京工业大学学报,2013,39(6):811-816.GUO Tie-neng,CUI Ya-hui,CAI Li-gang,et al.The influence of the chucking mode on the manufacture of the Z-guide face camber curve of super-span beam[J].Journal of Beijing University of Technology,2013,39(6):811-816.(in Chinese)
[7]  程强,董雪娇,刘志峰,等.大跨度重载横梁导轨接触的变形分析[J].北京工业大学学报,2012,38(1):12-16.CHENG Qiang,DONG Xue-jiao,LIU Zhi-feng,et al.Deformation analysis of slideway contact of a long span and heavy load crossbeam[J].Journal of Beijing University of Technology,2012,38(1):12-16.(in Chinese)
[8]  雷英杰,张善文,李续武,等.MATLAB遗传算法工具箱及应用[M].西安:西安电子科技大学出版社,2005.
[9]  LAGARIAS J C,REEDS J A,WRIGHT M H,et al.Convergence properties of the nelder-mead simplex method in low dimensions[J].SIAM Journal on Optimization,1998,9(1):112-147.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133