HSIEH C C,YAO S C.Evaporative heat transfer characteristics of a water spray on micro-structured silicon surfaces[J].International Journal of Heat and Mass Transfer,2006,49(1):962-974.
[2]
ERIC A C,JUNGHO K,KEN K.Spray cooling of enhanced surfaces:impact of structured surface geometry and spray axis inclination[J].International Journal of Heat and Mass Transfer,2006,49(9):4910-4920.
[3]
ERIC A C,JUNGHO K,KEN K.Enhanced surface spray cooling with embedded and compound extended surface structures[J].International Journal of Heat and Mass Transfer,2006,40(2):215-223.
[4]
CHRISTOF S,PETER S.Spray cooling on micro structured surfaces[J].International Journal of Heat and Mass Transfer,2007,50(4):4089-4097.
[5]
陈东芳,唐大伟,胡学功.毛细微槽结构表面的喷雾冷却可视化研究[J]工程热物理学报,2008,29(9):1548-1550.CHEN Dong-fang,TANG Da-wei,HU Xue-gong.The visualization of spray cooling on capillary microgroove surface[J].Journal of Engineering Thermophysics,2008,29(9):1548-1550.(in Chinese)
[6]
张伟,王照亮,徐明海.微结构表面封闭式喷雾冷却传热特性[J].强激光与粒子束,2012,24(9):2053-2058.ZHANG Wei,WANG Zhao-liang,XU Ming-hai.Heat transfer characteristics in closed-loop spray cooling of micro-structured surfaces[J].High Power Laser and Particle Beams,2012,24(9):2053-2058.(in Chinese)
[7]
王亚青,刘明侯,刘东.高功率激光器喷雾冷却的实验研究[J].强激光与粒子束,2009,21(12):1761-1766.WANG Ya-qing,LIU Ming-hou,LIU Dong.Experimental study on spray cooling for high-power laser[J].High Power Laser and Particle Beams,2009,21(12):1761-1766.(in Chinese)
[8]
MUDAWAR I,ESTES K A.Optimizing and predicting CHF in spray cooling of a square surface[J].Journal of Heat Transfer,1996,118:672-679.
[9]
GHODBANE M,HOLMAN J P.Experimental study of spray cooling with Freon-113[J].International Journal of Heat and Mass Transfer,1991,34(45):1163-1174.
[10]
KLINE S J,MCCLINTOCK F A.Describing uncertainties in single sample experiments[J].Mechanical Engineering,1953,75(10):3-8.
[11]
VISARIA M,MUDAWAR I.Theoretical and experimental study of the effects of spray inclination on two-phase spray cooling and critical heat flux[J].International Journal of Heat and Mass Transfer,2008,51:2398-2410.
[12]
ESTES K A,MUDAWAR I.Correlation of sauter mean diameter and critical heat flux for spray cooling of small surfaces[J].International Journal of Heat and Mass Transfer,1995,38(16):2985-2996.
[13]
YANG J,MARTIN R,CHOW L C.High heat flux spray cooling[J].High Heat Flux Engineering,1992,1739(4):29-38.
[14]
CHEN R H,CHOW L C,NAVEDO J E.Optimal spray characteristics in water spray cooling[J].International Journal of Heat and Mass Transfer,2004,47(5):5095-5099.
[15]
RINI D P,CHEN R H,CHOW C.Bubble behavior and nucleate boiling heat transfer in saturated FC-72 spray cooling[J].Journal of Heat Transfer,2002,124(5):63-72.
