FARAZILA Y,MIYASHITA Y,WANG H,et al.YAG laser spot welding of PET and metallic materials[J].Journal of Laser Micro/Nanoengineering,2011,6(1):69-74.
[2]
李君.激光焊接钢-铝薄板焊缝材料的研究[J].焊接技术,2006,35(4):25-27.LI Jun.Investigation on welding material for laser welding of steel-aluminum thin plate[J].Welding Technology,2006,35(4):25-27.(in Chinese)
[3]
MATHIEU A,SHABADI R,DESCHAMPS A,et al.Dissimilar material joining using laser(aluminum to steel using zinc-based filler wire)[J].Optics and Laser Technology,2007,39(3):652-661.
[4]
王涛,周惦武,彭艳,等.钢/铝异种金属预置Si粉的光纤激光焊接[J].中国激光,2012,39(3):1-8.WANG Tao,ZHOU Dian-wu,PENG Yan,et al.Steelto-aluminum fiber laser butt welding with Si powder prefilling[J].Chinese Journal of Lasers,2012,39(3):1-8.(in Chinese)
[5]
王承权,张京立.舰船钢-铝结构过渡接头的应用及节点设计[J].船舶工程,2004,26(6):34-38.WANG Cheng-quan,ZHANG Jing-li.Application and nodal point design of structural transition joint(STJ)in ship with steel-aluminum superstructure[J].Ship Engineering,2004,26(6):34-38.(in Chinese)
[6]
UEDA K,OGURA T,NISHIUCHI S,et al.Effects of Zn-based alloys coating on mechanical properties and interfacial microstructures of steel/aluminum alloy dissimilar metals joints using resistance spot welding[J].Materials Transactions,2011,52(5):967-973.
[7]
CHOI C Y,KIM D C,NAM D G,et al.A hybrid joining technology for aluminum/zinc coated steels in vehicles[J].Journal of Materials Science and Technology,2010,26(9):858-864.
[8]
ZHANG Wei-hua,QIU Xiao-ming,SUN Da-qian,et al.Effects of resistance spot welding parameters on microstructures and mechanical properties of dissimilar material joints of galvanised high strength steel and aluminium alloy[J].Science and Technology of Welding and Joining,2011,16(2):153-161.
[9]
王希靖,商献伟,张昌青.大截面钢/铝异种金属摩擦焊接工艺研究[J].电焊机,2010,40(7):45-48.WANG Xi-jing,SHANG Xian-wei,ZHANG Chang-qing.Study on friction welding technology for large cross-section steel and aluminum dissimilar metals[J].Electric Welding Machine,2010,40(7):45-48.(in Chinese)
[10]
TABAN E,GOULD J E,LIPPOLD J C.Dissimilar friction welding of 6061-T6 aluminum and AISI 1018 steel properties and microstructural characterization[J].Materials and Design,2010,31(5):2305-2311.
[11]
XIONG Jiang-tao,LI Jing-long,QIAN Jin-wen,et al.High strength lap joint of aluminium and stainless steels fabricated by friction stir welding with cutting pin[J].Science and Technology of Welding and Joining,2012,17(3):196-201.
[12]
BANG H,BANG H,JEON G,et al.Gas tungsten arc welding assisted hybrid friction stir welding of dissimilar materials Al6061-T6 aluminum alloy and STS304 stainless steel[J].Materials and Design,2012,37:48-55.
[13]
ZHANG Gui-feng,SU Wei,ZHANG Jian-xun,et al.Friction stir brazing:a novel process for fabricating Al/steel layered composite and for dissimilar joining of Al to steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2011,42(9):2850-2861.
[14]
TANAKA K,KUMAGAI M,YOSHIDA H.Dissimilar joining of aluminum alloy and steel sheets by friction stir spot welding[J].Journal of Japan Institute of Light Metals,2006,56(6):317-322.
[15]
中国汽车工程学会.世界汽车技术发展跟踪研究[M].北京:北京理工大学出版社,2006.
[16]
张宇,朱平,陈关龙,等.基于有限元法的轿车发动机罩板轻量化设计[J].上海交通大学学报,2006,40(1):163-166.ZHANG Yu,ZHU Ping,CHEN Guan-long,et al.The lightweight design of bonnet in auto-body based on finite element method[J].Journal of Shanghai Jiaotong University,2006,40(1):163-166.(in Chinese)
[17]
车龙启,兰凤崇,陈吉清.车身轻量化与钢铝一体化结构新技术的研究进展[J].机械工程学报,2008,44(6):27-35.CHE Long-qi,LAN Feng-chong,CHEN Ji-qing.New technology of lightweight and steel-aluminum hybrid structure car body[J].Chinese Journal of Mechanical Engineering,2008,44(6):27-35.(in Chinese)
[18]
李亚江,王娟,刘鹏.异种难焊材料的焊接及应用[M].北京:化学工业出版社,2004.
[19]
李亚江.特殊及难焊材料的焊接[M].北京:化学工业出版社,2003.
[20]
OZAKI H,KUTSUNA M.Laser-roll welding of a dissimilar metal joint of low carbon steel to aluminium alloy using 2 kW fibre laser[J].Welding International,2009,23(5):345-352.
[21]
李亚江,吴娜.钢/铝异种金属焊接的研究现状[J].焊接,2010(3):5.LI Ya-jiang,WU Na.Current research status of dissimilar materials welding between steel and aluminum[J].Welding&Joining,2010(3):5.(in Chinese)
[22]
ENGELBRECHT L,MEIER O,OSTENDORF A,et al.Laser beam brazing of steel-aluminium tailored hybrid blanks[CD]∥Proceedings of ICALEO2006.Orlando:Laser Institute of America,2006:312-318.
[23]
BRUCKNER J,HIMMELBAUER K.Potential areas of use for the CMT process,notably in joining steel to aluminum[C]∥IIW Document,XII-1846-05.Paris:International Institute of Welding,2005:220-225.
[24]
BRUCKNER J.Cold metal transfer has a future joining steel to aluminum[J].Weld Journal,2005,84(6):38-40.
[25]
MORTIMER J.Mix of robots used for Jaguar's aluminumbodied XJ luxury car[J].Industrial Robot:An International Journal,2003,30(2):145-151.
[26]
VRANAKOVA R.Arc welding of joints between zinccoated steel and aluminum[J].Welding in the World,2005,49(6):105-109.
[27]
MURAKAMI T.Dissimilar metal joining of aluminum to steel by MIG arc brazing using flux cored wire[J].ISIJ International,2003,43(10):1596-1620.
[28]
陈树海,马柯,黄继华,等.钢/铝异种金属双熔池TIG熔钎焊接头的显微组织与力学性能[J].中国有色金属学报,2011,21(12):3076-3081.CHEN Shu-hai,MA Ke,HUANG Ji-hua,et al.Microstructure and mechanical property of joint by TIG welding-brazing with dual weld pools for steel/aluminum dissimilar metals[J].The Chinese Journal of Nonferrous Metals,2011,21(12):3076-3081.(in Chinese)
[29]
LIN San-bao,SONG Jian-ling,YANG Chun-li,et al.Metallurgical and mechanical investigations of aluminiumsteel butt joint made by tungsten inert gas welding-brazing[J].Science and Technology of Welding and Joining,2009,14(7):636-639.
[30]
SONG Jian-ling,LIN San-bao,YANG Chun-Li,et al.Analysis of intermetallic layer in dissimilar TIG weldingbrazing butt joint of aluminium alloy to stainless steel[J].Science and Technology of Welding and Joining,2010,15(3):213-218.
[31]
DONG Hong-gang,HU Wen-jin,DUAN Yu-ping,et al.Dissimilar metal joining of aluminum alloy to galvanized steel with Al-Si,Al-Cu,Al-Si-Cu and Zn-Al filler wires[J].Journal of Materials Processing Technology,2012,212(2):458-464.
[32]
DONG Hong-gang,YANG Li-qun,DONG Chuang,et al.Improving arc joining of Al to steel and Al to stainless steel[J].Materials Science and Engineering:A,2012,534:424-435.
[33]
DONG Hong-gang,LIAO Chuan-qing,YANG Li-qun,et al.Effects of post-weld heat treatment on dissimilar metal joint between aluminum alloy and stainless steel[J].Materials Science and Engineering:A,2012,550:423-428.
[34]
FENG Ji-cai,ZHANG Hong-tao,HE Peng.The CMT short-circuiting metal transfer process and its use in thin aluminium sheets welding[J].Materials and Design,2009,30:1850-1852.
[35]
黄鹏飞,卢振洋,高文宁,等.钢铝异种金属的低能量焊接法[J].机械工程学报,2009,45(11):295-299.HUANG Peng-fei,LU Zhen-yang,GAO Wen-ning,et al.Low energy welding technology in bonding steel with aluminum[J].Chinese Journal of Mechanical Engineering,2009,45(11):295-299.(in Chinese)
[36]
LIN Jian,MA Nin-shu,LEI Yong-ping,et al.Investigation on interface layer failure and shear strength of CMT brazed lap joint of dissimilar materials[J].Transactions of JWRI,2011,40(1):101-107.
[37]
ZHANG Hong-tao,FENG Ji-cai,HE Peng,et al.The arc characteristics and metal transfer behaviour of cold metal transfer and its use in joining aluminium to zinccoatedsteel[J].Materials Science and Engineering:A,2009,499(1/2):111-113.
[38]
张洪涛,冯吉才,何鹏,等.镀锌层对铝/镀锌钢板CMT熔-钎焊电弧加热行为的影响[J].焊接学报,2009,30(8):37-42.ZHANG Hong-tao,FENG Ji-cai,HE Peng,et al.Effect of zinc coating on arc heating behavior for joining Al and zinc coated steel by welding brazing process[J].Transaction of the China Welding Institution,2009,30(8):37-42.(in Chinese)
[39]
ZHANG Hong-tao,FENG Ji-cai,HE Peng,et al.Interfacial microstructure and mechanical properties of aluminium-zinc-coated steel joints made by a modified metal inert gas welding-brazing process[J].Materials Characterization,2007,58(7):588-592.
[40]
ZHANG Hong-tao,FENG Ji-cai,HE Peng.Interfacial phenomena of cold metal transfer(CMT)welding of zinc coated steel and wrought aluminium[J].Materials Science and Technology,2008,24(11):1346-1349.
[41]
FENG Ji-cai,HE Peng,HACKL H.Distribution of Zn and interfacial microstructure of braze-welding CMT joints between alurniniurn and galvanized steel sheets[J].Solid State Phenomena,2007,127:43-48.
[42]
LAUKANT H.Flux-less joining technique of aluminum with zinc-coated steel sheets by a dual-spot-laser beam[J].Advanced Materials Research,2005(6/8):163-170.
[43]
KREIMEYER M.Combined welding-brazing process for joining aluminum-steel-tailored blanks with high power laser sources[C]∥International Body Engineering Conference and Exhibition.Warrendale:SAE International,2002-1-2009.
