modeling and nonlinear controller design of the similar model of a forging manipulator[ J]. Journal of Mechanical Engineering, 2010, 46(11): 56-57. (in Chinese)
[2]
童幸. 锻造操作机主运动机构性能研究[D]. 上海: 上海交通大学机械与动力工程学院, 2011.TONG Xing. Performance research on major-motion mechanisms for forging manipulators [ D ]. Shanghai:School of Mechanical Engineering, Shanghai Jiaotong University, 2011. (in Chinese)
[3]
张晓桐. 一种新型锻造操作机机构性能分析[D]. 秦皇岛: 燕山大学机械工程学院, 2013.ZHANG Xiao-tong. Institution performance analysis of a new type forging manipulator[ D]. Qinhuangdao: College of Mechanical Engineering, Yanshan University, 2013.(in Chinese)
[4]
许允斗, 姚建涛, 赵永生. 一种典型 DDS 锻造操作机运动学分析[J]. 机械工程学报, 2012, 48(3): 50-56.XU Yun-dou, YAO Jian-tao, ZHAO Yong-sheng. Kinematics analysis of a typical DDS forging manipulator[J]. Journal of Mechanical Engineering, 2012, 48 (3):50-56. (in Chinese)
[5]
傅新, 徐明, 王伟, 等. 锻操作机液压系统设计与仿真[J]. 机械工程学报, 2010, 46(11): 49-53.FU Xin, XU Ming, WANG Wei, et al. Hydraulic system
[6]
design and simulation of the forging manipulator [ J ].Journal of Mechanical Engineering, 2010, 46 (11): 49-53. (in Chinese)
[7]
丁华锋, 黄真, 曹毅. 运动链拓扑图的自动生成及图谱库的建立[J]. 机械工程学报, 2006, 42(4): 32-35.DING Hua-feng, HUANG Zhen, CAO Yi. The topological
[8]
graphs creation automatically of kinematic Chains and atlas
[9]
database establishment [ J ]. Journal of Mechanical Engineering, 2006, 42(4): 32-35. (in Chinese)
[10]
CODOUREY A. Dynamic modeling of parallel robots for computed-torqe control implementation [ J]. International Robotics Research, 1998, 17(12): 1325-1336.
fuzzy PID controller based on self-organizing adjustment factors [ J ]. Journal of System Simulation, 2011, 23(12): 2732-2737. (in Chinese)
[14]
方一鸣, 邓菲, 石胜利, 等. 非对称液压缸位置伺服系统鲁棒控制[ J]. 农业机械学报, 2013, 44 (10):272-276.FANG Yi-ming, DENG Fei, SHI Sheng-li, et al. Robust control for position servo system of asymmetric hydraulic
[15]
cylinder [ J ]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44 (10): 272-276. ( in Chinese)
[16]
杨军宏, 尹自强, 李圣仪. 阀控非对称缸的非线性建模及其反馈线性化 [ J]. 机械工程学报, 2006, 42(5): 203-207.YANG Jun-hong, YIN Zi-qiang, LI Sheng-yi. The nonlinear model and of valve controlled asymmetric cylinder and its feedback linearization [ J ]. Journal of Mechanical Engineering, 2006, 42 (5 ): 203-207. ( in Chinese)
[17]
YAO B, BU F, CHIU G T C. Nonlinear adaptive robust control of electro-hydraulic servo systems with discontinuous projection[ C] // Proceeding of IEEE Conf Decision and Control. New York: IEEE, 1998: 2265-2270.
[18]
刘治宇. 锻造操作机夹钳升降液压系统建模与仿真[D]. 沈阳: 东北大学机械工程与自动化学院, 2008.LIU Zhi-yu. The modeling and simulation of clamp's lifting hydraulic system on forging manipulation [ D ].Shenyang: School of Mechanical Engineering and Automation, Northeastern University, 2008. ( in Chinese)
[19]
李洪人, 王栋梁, 李春萍. 非对称电液伺服系统的静态特性分析[ J]. 机械工程学报, 2003, 39 (2): 18-22.LI Hong-ren, WANG Dong-liang, LI Chun-ping. Static
[20]
property analysis of electrohydraulic single rod cylinder servo systems [ J]. Journal of Mechanical Engineering,2003, 39(2): 18-22. (in Chinese)
[21]
崔雅静, 杜艳丽, 王晓雷. 自适应模糊 PID 控制器的设计[J]. 控制工程, 2008, 15(9): 128-131.CUI Ya-jing, DU Yan-li, WANG Xiao-lei. Design of Self-adaptive fuzzy PID controller [ J ]. Control Engineering, 2008, 15(9): 128-131. (in Chinese)
[22]
王素青, 姜维福. 基于 MATLAB / Simulink 的 PID 参数整定[J]. 自动化技术与应用, 2009, 28(3): 24-25.WANG Su-qing, JIANG Wei-fu. PID tuning based on
[23]
高峰, 郭为忠, 宋清玉. 重型制造装备国内外研究与发展[J]. 机械工程学报, 2010, 46(19): 92-107.GAO Feng, GUO Wei-zhong, SONG Qing-yu. Current development of heavy-duty manufacturing equipments [J]. Journal of Mechanical Engineering, 2010, 46 (19): 92-107. (in Chinese)
[24]
王凤喜. 大锻件生产行业与锻造技术发展[ J]. 锻压机械, 2002, 37(4): 3-6.
[25]
WANG Feng-xi. Large forgings industry & development of forging technique [ J]. Metal Forming Machinery, 2002,37(4): 3-6. (in Chinese)
