NELSON P A, ELLIOTT S J. Active Control of Sound[M]. San Diego: Academic Press, 1992． 117-160．
[5]
LEVENTHALL H G, EGHTESADI K. Active attenuation of noise: Dipole and monopole system[A]. In:CZARNECKI S. Inter-Noise '79: Proceedings[C]. Poughkeepsie: Noise Control Foundation, 1980． 175-180．
[6]
EGHTESADI K, HONG W K W, LEVENTHALL H G. The tight-coupled monopole active attenuator in aduct[J]. Noise Control Engineering, 1983, 20(2) : 16-20．
[7]
SNYDER S D, HANSEN C H. Active noise control in ducts: Some physical insights[J]. J Acoust Soc Am,1989, 86(1) : 184-194．
CHUNG J Y, BLASER D A. Transfer function method of measuring in-duct acoustic properties. 1 .theory [J]. JAcoust Soc Am, 1980, 68(3) : 907-913．
[10]
CHEN Kuo-tsai, LIU Yun-hei. A physical insight of the active control on sound source in a pipe[J]. AppliedAcoustics, 2000, 61: 133-148．
[11]
TICHY J, WARNAKA G E, POOLE L A. A study of active control of noise in ducts[J]. Journal of Vibration,Acoustics, Stress and Reliability in Design, 1984, 106: 399-404．
[12]
KONG X, KUO S M. Study of causality constraint on feedforward active noise control systems[J]. IEEETransactions on Circuits and Systems II: Analog and Digital Signal Processing, 1999, 46(2) : 183-186．
[13]
TOOCHINDA V, HOLLOT C V, CHAIT Y. On Selecting sensor and actuator locations for ANC in ducts[A].40th IEEE Conference on Decision and Control[C]. Piscataway: IEEE Standards Office, 2002． 2593-2598．
[14]
NELSON P A. Active control of acoustic field and the reproduction of sound[J]. Journal of Sound and Vibration,1994, 4: 177．
[15]
MANGIANTE G. Active noise control in a duct: the JMC method[A]. In: JONASSON H G. Proceedings of theInternational Conference on Noise Control Engineering[C]. Poughkeepsie: Noise Control Foundation, 1990． 1297．
[16]
BERENGIER M, ROURE A. Broadband active sound absorption in a duct carrying uniformly fluid[J]. Journal ofSound and Vibration, 1980, 68(3) : 437-449．
[17]
GUICKING D, KARCHER K Active impedance control for one-dimensional sound[J]. Journal of Vibration,Acoustics, Stress and Reliability in Design, 1984, 106: 393-396．
[18]
FURSTOSS M, THENAIL D, GALLAND M A. Surface impedance control for sound absorption: direct andhybrid passive/active strategies[J]. Journal of Sound and Vibration, 1997, 203(2) : 219-236．
[19]
KRAUSE P, WELTENS H Advanced design of automotive exhaust silencer systems[J]. SAE Technical PaperSeries, 1992, 922088: 1-11．
[20]
SUYAMA E, INABRA M, MASHINO R Characteristics of dual mode mufflers[J]. SAE Technical Paper Series,1989, 890612: 1-6．
[21]
SATO Susumu, MATSUHISA Hiroshi. Semi-active noise control by a resonator with variable parameters[A]. In:JONASSON H G. Proceedings of the International Conference on Noise Control Engineering[C]. Poughkeepsie:Noise Control Foundation, 1990． 1305-1308．
[22]
CHEN K T, CHEN Y H, LIN K Y, et al. The improvement on the transmission loss of a duct by addingHelmholtz resonators[J]. Applied Acoustics, 1998, 54(1) : 71-82．
[23]
BIRDSONG C B, RADCLIFFE C J. A Smart Helmholtz Resonator[R]. ASME Forum on Active NoisControl-Work in Progress. Dallas: IMECE, 1997． 1-5．
[24]
HOWARTH T R, VARADAN V K, BAO Xiao-qi, et al. Piezocomposite coating for active underwater soundreduction[J]. J Acoust Am, 1992, 91(2) : 823-831．
[25]
GREEN E R An Examination of 'Smart' Foams for Active Noise Control (Acoustic Foams)[D]: [dissertation].West Lafayette: Purdue University, 1995．
[26]
SMITH J P, JOHNSON B D, BURDISSO R A. A broadband passive-active sound absorption system[J]. JAcoust Soc Am, 1999, 106(5) : 2646-2652．
[27]
RAMANATHAN S, ZHU B, CHANG W, et al. Active and passive noise control using electro-active polymeractua
