STEWART D.Platform with six degrees of freedom[J].Institution of Mechanical Engineers-Proceedings, 1965,180(15):371-386.
[2]
SVININ M M,HOSOE S,UCHIYAMA.On the stiffness and stability of gough-stewart platforms[Z]. The 2001IEEE International Conference on Robotics & Automation, Seoul,2001.
[3]
BHASKER D, MRUTHYUNJAYA T S. A Newton-Euler formulation for the inverse dynamics of the Stewartplatform manipulator[J]. Mechanism and Machine Theory, 1998, 33(8): 1135-1152.
[4]
SICILIANO B. The tricept: Inverse kinematics, manipulability analysis and closed- loop direct kinematicsalgorithm[J]. Robotica, 1999, 17(3): 437-445.
[5]
李剑锋,王新华,刘德忠,等.Tricept型并联机床曲面加工的刀轨规划[J].北京工业大学学报,2002,28(4): 398-404.LI Jian-feng,WANG Xin-hua,LIU De-zhong,et al.Cutter-path planning for surface machining with the tricepttype parallel machine tool[J].Journal of Beijing University of Technology, 2002,28(4): 398-404. (in Chinese)
[6]
JOSHI S,TSAI L W.A comparison study of two 3-DOF parallel manipulator:One with three and the otherwith four supporting legs[Z].The 2002 IEEE International Conference on Robotics & Automation, Washington,2002.
[7]
TSAI L W,JOSHI S.Comparison study of architectures of four 3 degree-of-freedom translational parallelmanipulators[Z].The 2001 IEEE International Conference on Robotics & Automation, Seoul, 2001.
[8]
GOSSELIN C,RICARD R,NAHON M.A comparison of architectures of parallel mechanisms for workspaceand kinematic properties[J].ASME Journal of Mechanisms, Transmissions and Automation in Design, 1995, 110:35-41.
[9]
于靖军,毕树生,宗光华,等.面向生物工程的微操作机器人机构型综合研究[J].北京航空航天大学学报,2001,27(3):356-360.YU Jing-jun, BI Shu-sheng,ZONG Guang-hua, et al. Research on type synthesis of micromanipulation mechanisms for bioengineering[J]. Journal of Beijing University of Aeronautics and Astronautics, 2001, 27(3): 356-360. (in Chinese)