Rains D A. Tip clearance flows in axial flow compressors and pumps. Pasadena: Hydrodynamics and Mechanical Engineering Laboratories, California Institute of Technology, 1954.
[2]
Chen G T, Greitzer E M, Tan C S, et al. Similarity analysis of compressor tip clearance flow structure. Journal of Turbomachinery, 1991, 113(2): 260-271.
[3]
Kang S, Hirsch C. Numerical simulation of three-dimensional viscous flow in a linear compressor cascade with tip clearance. Journal of Turbomachinery, 1996, 118(3): 492-502.
[4]
Kang S, Hirsch C. Experimental study on the three-dimensional flow within a compressor cascade with tip clearance: Part I-velocity and pressure fields. Journal of Turbomachinery, 1993, 115(3): 434-443.
[5]
Kang S, Hirsch C. Experimental study on the three-dimensional flow within a compressor cascade with tip clearance: Part Ⅱ-the tip leakage vortex. Journal of Turbomachinery, 1993, 115(3): 444-450.
[6]
Kang S, Hirsch C. Tip leakage flow in linear compressor cascade. Journal of Turbomachinery, 1994, 116(4): 657-664.
[7]
Koch C C, Smith L H, Jr. Loss sources and magnitudes in axial-flow compressors. Journal of Engineering for Power, 1976, 98(3): 411-424.
[8]
Vo H D. Role of tip clearance flow on axial compressor stability. Massachusetts: Department of Aeronautics and Astronautics, Massachusetts Institute of Technology, 2001.
[9]
Hah C, Rabe D C. Role of tip clearance flows on flow instability in axial flow compressors. 15th International Symposium on Air Breathing Engines(ISABE), 2001.
[10]
Khalid S A. The effects of tip clearance on axial compressor pressure rise. Massachusetts: Department of Mechanical Engineering, Massachusetts Institute of Technology, 1995.
[11]
Khalid S A, Khalsa A S. Endwall blockage in axial compressors. Journal of Turbomachinery, 1999, 121(3): 499-509.
[12]
Hoeger M, Lahmer M, Dupslaff M, et al. A correlation for tip leakage blockage in compressor blade passages. Journal of Turbomachinery, 2000, 122(3): 426-432.
[13]
Liu B J, Yu X J, Yuan H J, et al. Application of SPIV in turbomachinery. Experiments in Fluids, 2006, 40(4): 621-642.
[14]
Yu X J, Liu B J, Yuan H J, et al. Characteristics of the tip leakage vortex in a low-speed axial compressor. AIAA Journal, 2007, 45(4): 870-878.
[15]
Zhang Z B, Yu X J, Liu B J. Precision analysis of the flow field measured in compressor rotor by using stereoscopic particle image velocimetry. Journal of Aerospace Power, 2010, 25(4): 868-876. (in Chinese) 张志博, 于贤君, 刘宝杰.压气机转子内部流场SPIV测量的精度分析.航空动力学报, 2010, 25(4): 868-876.
[16]
Yu X J, Liu B J. Stereoscopic PIV measurement of unsteady flows in an axial compressor stage. Experimental Thermal & Fluid Science, 2007, 31(8): 1049-1060.
[17]
Jiang H K, Li Y C, Zhang H, et al. A large-scale axial flow compressor facility and dynamic measurement techniques for rotor flow study. Journal of Aerospace Power, 1992, 7(1): 1-8. (in Chinese) 蒋浩康, 李雨春, 张洪, 等.研究转子内流动的大尺寸轴流压气机实验装置和动态测量技术.航空动力学报, 1992, 7(1): 1-8.
[18]
Suder K L. Blockage development in a transonic, axial compressor rotor. Journal of Turbomachinery, 1998, 120(3): 465-476.
[19]
Liu B J. The flow mechanism of wake vortices and its application. Beijing: School of Energy and Power Engineering, Beihang University, 1998. (in Chinese) 刘宝杰. 尾流旋涡的流动机制及其应用. 北京: 北京航空航天大学能源与动力工程学院, 1998.
[20]
Koch C C. Stalling pressure rise capability of axial flow compressor stages. Journal of Engineering for Power, 1981, 103(4): 645-656.
[21]
Smith L H, Jr. The effect of tip clearance on the peak pressure rise of axial-flow fans and compressors. ASME Symposium on Stall, 1958: 149-152.
[22]
Wisler D C. Loss reduction in axial-flow compressors through low-speed modal testing. Journal of Enieering for Gas Turbines and Power, 1985, 107(2): 354-363.
[23]
Baghdadi S. Modeling tip clearance effects in multistage axial compressors. Journal of Turbomachinery 1996, 118 (4): 613-843.
