Zhu Y C, Zeng W D, Ma X, et al. Determination of the friction factor of Ti-6Al-4V titanium alloy in hot forging by means of ring-compression test using FEM. Tribology International, 2011, 44(12): 2074-2080.
[2]
Shi C X, Yan M G, Zhu Z Q, et al. China aeronautical materials handbook. Beijing: China Standards Press, 2001: 107-126. (in Chinese) 师昌绪,颜鸣皋,朱之琴,等. 中国航空材料手册. 北京: 中国标准出版社, 2001: 107-126.
[3]
Yang H, Wang M, Guo L G, et al. 3D coupled thermo-mechanical FE modeling of blank size effects on the uniformity of strain and temperature distributions during hot rolling of titanium alloy large rings. Computational Materials Science, 2008, 44(2): 611-621.
[4]
Hua L, Mei X S, Wu X T. The roller design of the ring rolling machine. Metalforming Machinery, 1999(1): 35-36. (in Chinese) 华林, 梅雪松, 吴序堂. 轧环机轧辊设计. 锻压机械, 1999 (1): 35-36.
[5]
Guo L G, Yang H, Zhan M, et al. 3D-FE modeling of cold ring rolling process. Lu B H ed. Proceedings of the 6th International Conference on Frontiers of Design and Manufacturing. Beijing: Science Press, 2004: 625-626.
[6]
Guo L G, Yang H. Effect of sizes of forming rolls on cold ring rolling by 3D-FE numerical simulation. Transactions of Nonferrous Metals Society of China, 2006, 16(Sup2): 645-651.
[7]
Guo J P, Li Y, Guo Z H, et al. The influence of roller sizes on the axial spread in cool rolling process of ring units. Die & Mould Industry, 2009, 35(10): 34-37. (in Chinese) 郭吉萍, 李悦, 郭正华, 等. 轧辊尺寸对环形件冷轧中端面轴向宽展的影响规律研究. 模具工业, 2009, 35(10): 34-37.
[8]
Wang M, Yang H, Guo L G, et al. Effects and optimization of roll sizes in hot rolling of large rings of titanium alloy. Rare Metal Materials and Engineering, 2009, 38(3): 393-397.
[9]
Anjami N, Basti A. Investigation of rolls size effects on hot ring rolling process by coupled thermo-mechanical 3D-FEA. Journal of Materials Processing Technology, 2010, 210(10): 1364-1377.
[10]
Zhou G, Hua L, Qian D S. 3D coupled thermo-mechanical FE analysis of roll size effects on the radial-axial ring rolling process. Computational Materials Science, 2011, 50(3): 911-924.
[11]
Han X H, Hua L, Lan J, et al. 3D FEM simulation and optimization design of rolling process of conical ring with inner steps. China Mechanical Engineering, 2007, 18(16): 1979-1983. (in Chinese) 韩星会, 华林, 兰箭, 等. 内台阶锥形环件轧制三维有限元模拟和工艺优化设计. 中国机械工程, 2007, 18(16): 1979-1983.
[12]
Wang Z W, Zeng S Q, Yang X H, et al. The key technology and realization of virtual ring rolling. Journal of Materials Processing Technology, 2007, 182(1): 374-381.
[13]
Ma Y W, Wang Z H, Liu D, et al. Optimization of rotational speed of main roll in profiled ring rolling of GH4169 alloy. Acta Aeronautica et Astronautica Sinica, 2011, 32(8): 1555-1562. (in Chinese) 马义伟, 王志宏, 刘东, 等. GH4169合金异形环件轧制过程的最优主辊转速. 航空学报, 2011, 32(8): 1555-1562.
[14]
Guo L G. Optimization design and simulation investigation of radial-axial ring rolling process. Xi'an: School of Materials Science and Engineering, Northwestern Polytechnical University, 2008. (in Chinese) 郭良刚. 环件径轴向轧制过程优化设计与仿真研究. 西安: 西北工业大学材料学院, 2008.
[15]
Guo L G, Yang H. Key technologies for 3D-FE modeling of radial-axial ring rolling process. Materials Science Forum, 2008, 575-578: 367-372.
[16]
Guo L G, Yang H. Towards a steady forming condition for radial-axial ring rolling. International Journal of Mechanical Sciences, 2011, 53(4): 286-299.
[17]
Li L Y, Yang H, Guo L G, et al. A control method of guide rolls in 3D-FE simulation of ring rolling. Journal of Materials Processing Technology, 2008, 205(1): 99-110.
[18]
Guo L G, Yang H, Zhan M, et al. Simulation for guide roll in 3D-FE analysis of cold ring rolling. Materials Science Forum, 2004, 471-472: 760-764.
[19]
Hu Z M, Brooks J W, Dean T A. Experimental and theoretical analysis of deformation and microstructural evolution in the hot-die forging of titanium alloy aerofoil sections. Journal of Materials Processing Technology, 1999, 88(1): 251-265.
