Harvey T J, Morris S, Wang L, et al. Real-time monitoring of wear debris using electrostatic sensing techniques. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2007, 221(1): 27-40.
[2]
Harvey T J, Wood R J K, Powrie H E G. Electrostatic wear monitoring of rolling element bearings. Wear, 2007, 263(7): 1492-1501.
[3]
Chen Z X, Zuo H F, Zhan Z J, et al. Study of oil system oil-line debris electrostatic monitoring technology. Acta Aeronautica et Astronautica Sinica, 2012, 33(3): 446-452. (in Chinese) 陈志雄, 左洪福, 詹志娟, 等. 滑油系统全流量在线磨粒静电监测技术研究. 航空学报, 2012, 33(3): 446-452.
[4]
Sun J Z, Zuo H F, Zhan Z J, et al. Analysis of the influencing factors on the exhaust gas electrostatic monitoring signal of a turbo-shaft engine. Acta Aeronautica et Astronautica Sinica, 2012, 33(3): 412-420. (in Chinese) 孙见忠, 左洪福, 詹志娟, 等. 涡轴发动机尾气静电信号影响因素分析. 航空学报, 2012, 33(3): 412-420.
[5]
Kasai T, Fu X Y, Rigney D A, et al. Applications of a non-contacting Kelvin probe during sliding. Wear, 1999, 225(2): 1186-1204.
[6]
Zharin A L, Rigney D A. Application of the contact potential difference technique for on-line rubbing surface monitoring. Tribology Letter, 1998, 4(2): 205-213.
[7]
Kajdas C, Furey M J, Ritter A L, et al. Triboemission on a basic part of the boundary friction regime. Proceedings of the 12th International Tribology Colloquium 2000-Plus, 2000, 3: 2075-2096.
[8]
Zhang J Y, Coulthard J. Theoretical and experimental studies of the spatial sensitivity of an electrostatic pulverized fuel meter. Journal of Electrostatics, 2005, 63(12): 1133-1149.
[9]
Powrie H E G, Wood R J K, Harvey T J, et al. Electrostatic charge generation associated with machinery component deterioration. Proceedings of IEEE Aerospace Conference, 2002, 6: 2927-2934.
[10]
Powrie H E G. Use of electrostatic technology for aeroengine oil system monitoring. Proceedings of IEEE Aerospace Conference, 2000, 6: 57-71.
[11]
Wang L, Wood R J K, Harvey T J, et al. Wear performance of oil lubricated silicon nitride sliding against various bearing steels. Wear, 2003, 255(1): 657-668.
[12]
Morris S, Wood R J K, Harvey T J. Use of electrostatic charge monitoring for early detection of adhesive wear in oil lubricated contacts. Journal of Tribology, 2002, 124(2): 288-296.
[13]
Tasbaz O D, Wood R J K, Browne M, et al. Electrostatic monitoring of oil lubricated sliding point contacts for early detection of scuffing. Wear, 1999, 230(1): 86-97.
[14]
Craig M, Harvey T J, Wood R J K, et al. Advanced condition monitoring of tapered roller bearings, Part 1. Tribology International, 2009, 42(11): 1846-1856.
[15]
Powrie H E G, Tasbaz O D, Wood R J K, et al. Performance of an electrostatic monitoring system during FZG scuffing test. International Conference on Condition Monitoring, 1999: 155-174.
[16]
Powrie H E G. Use of electrostatic technology for aero engine oil system monitoring. IEEE Aerospace Conference Proceedings. Montana: IEEE, 2000, 6: 57-72.
[17]
Wen Z H, Zuo H F, Li Y H. Gas path debris electrostatic monitoring technology and experiment. Journal of Aerospace Power, 2008, 23(12): 2312-2326. (in Chinese) 文振华, 左洪福, 李耀华. 气路颗粒静电监测技术及实验. 航空动力学报, 2008, 23(12): 2321-2326.
[18]
Li Y H, Zuo H F, Wen Z H. Simulated experiment of aircraft engine gas path debris monitoring technology. Acta Aeronautica et Astronautics Sinica, 2009, 30(4): 604-608. (in Chinese) 李耀华, 左洪福, 文振华. 航空发动机气路颗粒静电监测技术模拟实验. 航空学报, 2009, 30(4): 604-608.
[19]
Li Y H, Zuo H F, Liu P P. Gas path electrostatic monitoring of turbo-shaft engine: an exploratory experiment. Acta Aeronautica et Astronautica Sinica, 2010, 31(11): 2174-2181. (in Chinese) 李耀华, 左洪福, 刘鹏鹏. 某型航空涡轮轴发动机尾气静电监测探索性实验. 航空学报, 2010, 31(11): 2174-2181.
[20]
Li S C, Zuo H F. Design of electrostatic sensor for wear debris on-line monitoring. Piezoel Ectrics & Acoustooptics, 2010, 32(2): 325-328. (in Chinese) 李绍成, 左洪福. 磨粒在线监测静电传感器设计. 压电与声光, 2010, 32(2): 325-328.
