Qiao W Y. Aero-engine aeroacoustics[M]. Beijing: Bei-hang University Press, 2010: 1-8 (in Chinese). 乔渭阳. 航空发动机气动声学[M]. 北京: 北京航空航天大学出版社, 2010: 1-8.
[2]
Enghardt L, Holewa A, Tapken U. Comparison of different analysis techniques to decompose a broad-band ducted sound field in its mode constituents[C]//Proceedings of the 13th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2007.
[3]
Tyler J M, Sofrin T G. Axial flow compressor noise studies[J]. Transactions of the Society of Automotive Engineers, 1962, 70: 309-332.
[4]
Enghardt L, Lowis C. Broadband sound power determination in flow ducts[C]//Proceedings of the 10th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2004.
[5]
Lowis C R, Joseph P. A focused beamformer technique for separating rotor and stator-based broadband sources[C]//Proceedings of the 12th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2006.
[6]
Sijtsma P. Using phased array beamforming to locate broadband noise sources inside a turbofan engine, NLR-TP-2006-320[R]. Cambridge, MA: AARC Engine Noise Phased Array Workshop, 2006.
[7]
Sijtsma P. Feasibility of in-duct beamforming[C]//Proceedings of the 13th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2007.
[8]
Dougherty R P, Walker B E, Sutliff D L. Locating and quantifying broadband fan sources using in-duct microphones[C]//Proceedings of the 16th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2010.
[9]
Finez A, Leneveu R, Picard C, et al. In-duct acoustic source detection using acoustic imaging techniques[C]//Proceedings of the 19th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2013.
[10]
Ian D, Bennett G J. Experimental investigations of coherence based noise source identification technique for turbomachinery applications-classic and novel techniques[C]//Proceedings of the 17th AIAA/CEAS Aeroacoustic Conference. Reston: AIAA, 2011.
[11]
Pardowitz B, Tapken U, Knobloch K, et al. Core noise-identification of broadband noise source of a turbo-shaft engine[C]//Proceedings of the 20th AIAA/CEAS Aeroacoustic Conference. Reston: AIAA, 2014.
[12]
Michalke A, Arnold F, Holste F. On the coherence of the sound field in a circular duct with uniform mean flow[J]. Journal of Sound and Vibration, 1996, 190(2): 261-271.
[13]
Chung J Y. Rejection of flow noise using a coherence function method[J]. Journal of the Acoustical Society of America, 1977, 62(2): 338-395.
[14]
Enghardt L, Moreau A, Tapken U, et al. Radial mode decomposition in the outlet of a LP turbine-estimation of the relative importance of broadband noise[C]//Proceedings of the 15th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2009.
[15]
Moreau A, Enghardt L. Ranking of fan broadband noise sources based on an experimental parametric study[C]//Proceedings of the 15th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2009.
[16]
Tapken U, Enghardt L. Optimization of sensor arrays for radial mode analysis in flow ducts[C]//Proceedings of the 12th AIAA/CEAS Aeroacoustics Conference. Reston: AIAA, 2006.
[17]
Jürgens W, Tapken U, Pardowitz B, et al. Technique to analyze characteristics of turbomachinery broadband noise sources[C]//Proceedings of the 16th AIAA/CEAS Aeroacoustic Conference. Reston: AIAA, 2010.
[18]
Jürgens W, Pardowitz B, Tapken U, et al. Separation of broadband noise sources in aeroengine ducts with respect to modal decomposition[C]//Proceedings of the 17th AIAA/CEAS Aeroacoustics Conference (32nd AIAA Aeroacoustics Conference), 2011.
[19]
Arnold F. Experimental and numerical investigation on the performance and determination in flow canals[D]. Berlin: Fortschrift Berichte, 1999.
[20]
Nelson P A, Yoon S H. Estimation of acoustic source strength by inverse methods: Part I, conditioning of the inverse problem[J]. Journal of Sound and Vibration, 2000, 233(4): 639-664.
[21]
Kim Y, Nelson P A. Estimation of acoustic source strength within a cylindrical duct by inverse methods[J]. Journal of Sound and Vibration, 2004, 275(1): 391-413.
