Di H S, Wang T P,'Miao Y C, Bac P W, Wang G D, LiuX H. In: Zhao L C ed., Proc sib National Coo f on Theoryof Plastic Processing and New TeChnology,Special Issue of Rolling, 1999: 247(邸洪双,王廷溥,苗雨川,鲍培玮,王国栋,刘相华见:赵材春主编,第八届全国塑性加工理论与新技术学术会议轧钢专辑,1999:247)
[2]
Tian N Y. Slab Continuous Casting, Hot Charging andDirect Rolling. Beijing: Metallurgical industry Press,1993: 52(田乃媛.薄板坯连铸及热装直接轧制、北京:冶金工业出版社,1993:52)
[3]
Jin R J. Master Thesis, Notheastern University,Shenyang, 1986(金仁杰. 东北大学硕士学位论文, 沈阳, 1986)
[4]
Kang C G, Kim Y D. Metall Mater Trans, 1997; 28B:1213
[5]
Jiu D Y. Symp lust Mech Jpn, 1993; 9: 173
[6]
Jin Z M. PhD Thesis, Northeastern University, Shenyang,1999(金珠梅东北大学博士学位论文,沈阳,1999)
[7]
Reza A M, Hasan M, Guthrie R I L. Metall Mater Trans,1995; 26B: 731
[8]
Farouk B, Apelian D, Kim Y G. Metall Trans, 1992; 23B:477
[9]
Miyazawa K, Szekely J. Metall Trans, 1981; 12A: 1047
[10]
Hwang J D, Lin H J, Hwang W S. ISIJ Int, 1995; 35: 170
