Kattamis T Z, Flemings M C. TMS-AIME, 1966; 236:1523
[2]
Powell G L F, Hogan L M. TMS-AIME, 1969; 245: 407
[3]
Walker J L. In: Pierre G R St ed., The Physical Chemistryof Process Metallurgy, Part 2, New York: Interscience,1959: 845
[4]
Herlach D M. Mater Sci Eng, 1994; 12R: 177
[5]
Schwarz M, Karma A, Eckler K, Herlach D M. Phys RevLett, 1994; 73: 380
[6]
Horvay G. J Heat Mass Transfer, 1965; 8: 195
[7]
Glicksman M E. Acta Metall, 1965; 13: 1231
[8]
Jackson K A, Hunt J D, Uhlmann D R, Seward T P III.TMS-AIDE, 1966; 236: 149
[9]
Gartner R F, Norman A F, Greer A L, Zambon A, Ramous E. Acta Mater 1997; 45: 51
[10]
Cochrane R F, Herlach D M, Feuerbacher B. Mater SciEng, 1991; 133A: 706
[11]
Du W. Ph.D Thesis, Northwestern Polytechnical Universityl Xi'an, 1998(杜 伟。西北工业大学博士学位论文,西安,1998)
[12]
Liu F, Cai Y, Guo X F, Yang G C. Casting, 2000; 6: 344
[13]
Chakravorty S, West D R F. J Mater Sci, 1984; 19: 3574
[14]
Machlin E S, Shao J. Metall Trans, 1978; 9A: 561
[15]
Liu F, Guo X F, Cai Y, Yang G C. Acta Metall Sin, 2000;36:567(刘峰,郭学峰,蔡瑜,杨根仓.金属学报,2000;36:567)
[16]
Li J F, Yang G C, Zhou Y H. J Cryst Growth,1998; 192:462
[17]
Piccone T J, Wu Y, Shiohara Y, Flemings M C. MetallTrans, 1987; 18A: 915
[18]
Boettinger W J, Coriell S R, Trivedi R. In: Mehrabian R,Parrish P A eds., Rapid Solidification Processing: Principles and Technologies IV, Baton Rouge, LA, Claitor's,1988: 13
[19]
Guo X F. Ph D Thesis, Northwestern Polytechnical Universityl Xi'an, 1999(郭学峰.西北工业大学博士学位论文,西安,1999)
[20]
Dahle A K, Thevik H J, Arnberg L, John D H St. MetallMater Trans, 1999; 30B: 287
