|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
网络化的ANN-GA系统优化中空纤维镍基板制备工艺参数
, PP. 1293-1297
Keywords: 中空纤维镍基板,网络化ANN-GA系统
Abstract:
在实验室研究中空纤维镍基板的制备工艺的基础上,采用自制的网络化的ANN-GA系统对58个样本进行了工艺参数优化和寻优,得到的最佳工艺参数如下中空镍纤维含量为97%;烧结温度为1275K;保温时间为20min;造孔剂PVB,PP和Ni(OH)2的含量分别为5%,3.5%和1%.在最优工艺条件基础上,获得了性能优异、孔率接近87%的基板材料.并用计算机分析和预报了各单因素的影响规律,预测结果与文献报道的实验结果一致.
| [1] | Dhar S K, Ovshinsky S R, Gifford P R, Corrigan D A. J Power Source, 1997; 65: 1
|
| [2] | Ohms D, Kohlhase M, Benczur-Urmossy G, Schadlich G. J Power Source, 2002; 105: 127
|
| [3] | Ilic D, Kilb M, Holl K, Praas H W, Pytlik E. J Power Source, 1999; 80: 112
|
| [4] | Kim H S, Itoh T, Nishizama M, Mohamedi M, Umeda M, Uchidc I. Int J Hydrogen Energy, 2002; 27: 295
|
| [5] | Rade I, Andersson B A. J Power Source, 2001; 93: 55
|
| [6] | Zhu W H, Durben P J, Tatarchuk B J. J Power Source, 2002; 111: 221
|
| [7] | Zhu W H. PhD Thesis, Institute of Chemical Metallurgy, The Chinese Academy of Sciences, Beijing, 1996 (朱文化．中国科学院化工冶金研究所博士学位论文,北京, 1996)
|
| [8] | Zhu W H, Zhang D J, Zhang G D, Ke J J. Mater Res Bull, 1995; 30: 1133
|
| [9] | Zhang D J, Luo S M, Wang Z K. Chin Pat, CN No.ZL1034880, 1989 (张登君,罗世民,王志宽．中国专利, CN No．ZL1034880, 1989)
|
| [10] | Li F, Zhang D J, Zhang H, Li B H, Tang Q, Zhang G D. Chin J Power Source, 1999; 23: 87 (李钒,张登君,张慧,李报厚,唐清,张冠东．电源技 术,1999;23:87
|
| [11] | Liu G H. PhD Thesis, University of Science and Technology Beijing, 2002 (刘国华．北京科技大学博士学位论文, 2002)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
