|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
连铸中间包水口堵塞的数值模拟
, PP. 1109-1114
Keywords: 连铸,水口,堵塞,数值模拟
Abstract:
采用数值模拟方法，对水口内钢水流场形态以及各种因素对水口沉积速率的影响作了分析研究。结果标明，滑板附近处以及水口底部的沉积比较明显；吹氩量对水口内的压力存在较大的影响，压力在滑动水口处存在突降；浇铸速度为1.2m/min的情况下，要防止吸气，最小吹氩量必须大于10L/min。Al2O3的沉积速率和Al2O3的质量浓度成线性关系；随着浇铸速度的提高，沉积速率也逐步增大。在吹氩量合适的范围内，吹氩能够降低沉积速率。对于同一拉速来说，吹氩量5L/min和30L/min对降低沉积速率的效果相近。
| [1] | FFeng X M,Ping Z F,Jiang M X,Ji B K.Refract Mater,2002;36(2):83(冯秀梅，平增福，蒋明学，姬保坤．耐火材料，2002；36(2)：83)
|
| [2] | RRob D,Bart B,Partick W.Steel Res,2003;74:351
|
| [3] | AAlavanja M,Gass R T,Kittridge R W,Tsai H T.Steelmaking Conf Prac,1995;78:415
|
| [4] | TThomas B G,Hua B.Steelmaking Conf Proc,2001;84:895
|
| [5] | RRackers K G,Thomas B G.Steelmaking Conf Proc,1995;78:723
|
| [6] | MMeadowcroft T R,Milbourne R J.J Met,1971;(6):11
|
| [7] | SSchmidt M,Russo T J,Bederka D J.Steelmaking Conf Prac,1990;73:451
|
| [8] | SSasaka I,Harada T,Shikano H,Tanaka I.Steelmaking Conf Proc,1991;74:349
|
| [9] | TTsai H T,Sammon W J,Hazelton D E.Steelmaking Conf Proc,1990;73:49
|
| [10] | Burty M.PTD Conf Proc,1995:287
|
| [11] | Launder B E,Spalding D B.Comput Method Appli Mech Eng,1974;3:269
|
| [12] | Yu H X,Zhu G S,Wang X H,Zhang J M,Wang W J.J Univ Sci Technol Beijing,2005;12:303
|
| [13] | Castillejos A H,Salcudean M E,Brimacombe J K.Metall Trans,1989;20B:603
|
| [14] | Zhang X Z.Transmission Theory of Metallurgy.Beijing:Metallurgical Industry Press,1988:427
|
| [15] | Chakraborty S,Sahai Y.Metall Trans,1992;23B:153
|
| [16] | Bai H,Thomas B G.Steelmaking Conf Proc,2000;83:183)
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
