|
OALib Journal期刊
ISSN: 2333-9721
费用：99美元
|
|
|
|
铝合金回归再时效状态的超峰时效强度行为分析
, PP. 1253-1258
Keywords: 铝合金,回归再时效,时效强度
Abstract:
3种Al-Zn-Mg-Cu合金经过100℃或者120℃预时效24h,并在200℃分别回归一定时间后再时效,均显示出超过该合金预时效状态的强度,甚至高于相同温度单级时效的峰值强度,最高达到795MPa,且显示出较好的延伸率.显微组织分析及微区成分分析表明,较短时间的回归处理所引起的晶界无析出带经过再时效后变窄甚至消失,对应的晶内组织也非常弥散.而峰时效状态下虽然晶内组织弥散,但都显示出明显的晶界无析出带组织特征.铝合金回归再时效(RRA)状态的超峰值时效强度的原因可以归结为,再时效使回归时产生的晶界无析出带变窄或消失,使晶界强度提高;与此同时,晶内仍然保持和获得更加弥散的组织状态及更高的析出强化效应.
| [1] | Cina B. US Pat, 3,856,584, 1974-12-24
|
| [2] | Wallace W, Beddoes J C, Demalherbe M C. Can Aeronaut Space J, 1981; 27: 222
|
| [3] | Islam M U, Wallace W. Met Technol, 1983; 10(10): 386
|
| [4] | Nguyen C D, Rajan K, Wallace W. Metall Trans, 1983; 14A: 1843
|
| [5] | Danh N, Rajan, K, Wallace W. Metall Trans, 1985; 16A: 2068
|
| [6] | Islam M U, Wallace W. Met Technol, 1984; 11(8): 320
|
| [7] | Holt R T, Parameswaran V R, Wallace W. Can Aeronaut Space J, 1996; 42: 83
|
| [8] | Rajan K, Wallace W, Beddoes J C. J Mater Sci, 1982; 17: 2817
|
| [9] | Oonishi C. Heat Treat, 1992; 32(2): 83 (大西忠一．热处理,1992,32(2):83)
|
| [10] | Oliveira A F Jr. Mater Sci Eng, 2004; A379: 321
|
| [11] | Meng Z F, Zheng Y, Long H W, Liu Y H. Acta Metall Sin, 1997; 33: 479 (孟昭富,郑勇,龙厚文,刘玉惠．金属学报,1997;33:479)
|
| [12] | Mo Z M, Zheng Z Q. Alum Process, 1996; 19(1): 28 (莫志民,郑子樵．铝加工, 1996;19(1):28)
|
| [13] | Ural K. J Mater Sci Lett, 1994; 13: 383
|
| [14] | Park J K, Ardell A J. Acta Metall Mater, 1991; 39: 591
|
| [15] | Park D S. Mater Sci Technol, 1995; 11: 921
|
| [16] | Knano M, Araki I, Cui Q. Mater Sci Technol, 1994; 10: 599
|
| [17] | Robinson J S, Whelan S D, Cudd R L. Mater Sci Technol, 1999; 15: 717
|
Full-Text
|
|
Contact Us
service@oalib.com QQ:3279437679 
WhatsApp +8615387084133
|
|
